Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Portable Dolly System Rental Kit with Universal Track Ends
1 pièce (s) en stock
Tripod locking knob (metric M10).
1 pièce (s) en stock
Ballhead Baseplate
2 pièce (s) en stock
Magnum Dolly System
Magnum Dolly column
Alpha Dolly System (basis+column)
Alpha Dolly column
0.8m rail, 1.2m rail, short trolley, ends (no bumpers), 75/100mm bowl adaptor with Heavy Bullhead, and Kairos Controller includes PSU320E. Optional accessories as the Cable guide, tripod quick mount and transport case not included within this price and can be added seperatly to this bundle.
Motorized Descending Column for AR/VR TD10 with HW-ARUP-D bundled
Délai habituel 6 semaines
Alpha Dolly base
Magnum Base Dolly
Motorized Ascending Column for AR/VR TM10 with HW-ARUP-D bundled.
Délai habituel 6 semaines
Motorized Ascending Column for AR/VR TM50SA with HW-ARUP-D bundled.
Délai habituel 6 semaines
0.8m rail, 1.2m rail, short trolley, ends (no bumpers), 75/100mm bowl adaptor with Bullhead Studio, and Kairos Controller. Includes PSU320E. Optional accessories as the Cable guide, tripod quick mount and transport case not included within this price and can be added seperatly to this bundle.
TUNING TOP TRACK Motorized Dolly for 250mm interaxis track. 24V Power supply. Maximum speed 0,5 m/s.(*) 2 end blocks with tooth belt clamps. Cable chain connection to dolly. Cable chain connection to track. 12V PTZ power supply with 4 pin XLR connector. Adapter cable from XLR to Panasonic connector PTZ power supply
Délai habituel 6 semaines
Kirin Duo Jib - Extended - no connection rod allowed
Kirin DuoJib
TITAN MOCO Bundle includes: Titan 1500 slider, Titan Stepper Drive, 320W PSU with Slidelink, Kairos controller (MRMC-SP_DUAL-1500, MRMC-HKN-9v2, MRMC-HGN-7v3, MRMC-HPN-2v2, HPB-1)
TITAN MOCO Bundle includes: Titan 1000 slider, Titan Stepper Drive, 320W PSU with Slidelink, Kairos controller (MRMC-SP_DUAL-1000, MRMC-HKN-9v2, MRMC-HGN-7v3, MRMC-HPN-2v2, HPB-1)
WB-MSXL200, WB-Phoenix-RF, 2x WB-DY-DHB-200, WB-DY-DHBC-2, WB-DY-DSM, WB-XLR4P-DTAP-C
Délai habituel 6 semaines
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
WB-MSXL200, WB-Phoenix-RF, WB-PSU24, WB-PSC-10, WB-PSC-5
Délai habituel 6 semaines
The PanaTrack (Multi Slider MS XL) is a flexible camera slider that is straight and allows winding routes.
Délai habituel 6 semaines
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
The PanaTrack (Multi Slider MS XL) is a flexible camera slider that is straight and allows winding routes.
Délai habituel 6 semaines
0.8m rail, 1.2m rail, short trolley, ends (no bumpers), 75/100mm bowl adaptor with Mono head and Aion IQ Controller. Includes PSU185. Optional accessories as the Cable guide, tripod quick mount and transport case not included within this price and can be added seperatly to this bundle.
Includes: TITAN 1500 Slider, TITAN Stepper Drive, BULLHEAD STUDIO, 320w PSU. Additional adapters, mounts and cables included. Does not include optional transport case, tripod mount, dual support or turntable.
Includes: TITAN 1000 Slider, TITAN Stepper Drive, BULLHEAD STUDIO, 320w PSU. Additional adapters, mounts and cables included. Does not include optional transport case, tripod mount, dual support or turntable.
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
Slider 45"
Délai habituel entre 4 et 6 semaines
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
Slider 35"
Délai habituel entre 4 et 6 semaines
TITAN MOCO - MONOHEAD STUDIO bundle, includes: Titan 1000 slider, Titan Stepper Drive, Mono Head Studio, AION IQ controller, Tilta Nucelus Motor Pair (MRMC-SP_DUAL-1500, MRMC-HKN-9v2, MRMC-HGN-14v2, MRMC-AION IQ)
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
TITAN MOCO - MONOHEAD STUDIO bundle, includes: Titan 1000 slider, Titan Stepper Drive, Mono Head Studio, AION IQ controller, Tilta Nucelus Motor Pair (MRMC-SP_DUAL-1000, MRMC-HKN-9v2, MRMC-HGN-14v2, MRMC-AION IQ)
Matthews Slider 29"
Délai habituel entre 4 et 6 semaines
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
This camera slider has been imagined to be a great solution on the professional market. All features have been conceived with the best materials to meet the increasingly specific requirements of filmmakers.
Ultra smooth and effective camera slider for video professionals
Servo motor kit with 320w PSU with ethernet and Kairos controller - Bundle Pricing.
Western Dolly complete with Pop-Off Wheels, Push Bar, and Pull Handle
Délai habituel entre 4 et 6 semaines
Ultra smooth and effective camera slider for video professionals
Ultra smooth and effective camera slider for video professionals
Ultra smooth and effective camera slider for video professionals
Ultra smooth and effective camera slider for video professionals
Tuning Ceiling Track
Délai habituel 6 semaines
Curved Track, 2800mm radius, Angle 45 degree
Délai habituel 6 semaines
Ultra smooth and effective camera slider for video professionals
Round-d-Round Doorway Dolly. Requirs Shipping crate (395315) - purchased separately
Délai habituel entre 4 et 6 semaines
Centipede II Wheel Set
Délai habituel entre 4 et 6 semaines
Stepper motor kit with 320w PSU with ethernet and Kairos controller - Bundle Pricing.
Ultra smooth and effective camera slider for video professionals
200 cm (170 cm effective length), 79 inches (67 inches effective length), XL Motion Controller
0.8m rail, 1.2m rail, short trolley, ends (no bumpers) - 0.8, 1.2m sections and trolley only. Additonal mounting to be added as extra. Drive, Tripod, Quick Mount and transport case not included within this price.
3m Straight Ceiling Track. 350mm wide - 250mm interaxis 35mm metal grey pipes track with truss 25x25 and external Vessel for cables.
Délai habituel 6 semaines
4x4 Dolly
150 cm (120 cm effective length), 49 inches (47 inches effective length), XL Motion Controller
Wide Base Dolly CD6 Studio Wheels
Doorway Dolly
Délai habituel entre 4 et 6 semaines
Wide Base Dolly CD6.
Standard Base Dolly CD5 Studio Wheels
Standard Base Dolly CD5.
Travelling Tray (Medium) With Bloc Boogie
200 cm (170 cm effective length), 79 inches (67 inches effective length), Standard Control Unit
Travelling Tray (Small) With Bloc Boogie
Scooter Dolly Kit
Advanced Dolly Kit (track gauge 62cm) w. case
Carriage including XL Motion Controller, Motor, Belt, Timing Belt Pulley, Ball Bearings
150 cm (120 cm effective length), 49 inches (47 inches effective length), Standard Control Unit
Power Supply Box 230V
DC10 Control Panel 2 axes DC-10 control panel for dolly and column live movements RJ11 to RJ45 cable. RP120 adapter cable. RP50 adapter cable USB cable
Délai habituel 6 semaines
Transportsystem "onboard"
ATLAS Rail extended Dolly with accessories
4 Way Leveller cpl. Set
System low rig for New Magnum Turnstyle set incl. hard case
Trackwheel set 4pcs. for MT 400
2m Ceiling Track
Délai habituel 6 semaines
Basic Dolly Kit (track gauge 62cm) w. case
TITAN SLIDER 1500mm / 59.1in. Price shown is for the slider rail only. Case, tripod mount, dual support or drive not included in this price and should be added seperatly.
6-axis controller, for a standard setup (slider + remote head + lens motors) or custom configurations.
TITAN SLIDER 1000mm / 39.3in. Price shown is for the slider rail only. Case, tripod mount, dual support or drive not included in this price and should be added seperatly.
Additional- interchangeable spare pair of stainless steel rails. Length : 320 cm / 10 ft 6 inch
Stepper motor kit with 185w PSU and AION IQ controller - Bundle Pricing.
U-Bangi
Bigfoot Platform extensions XL (4pcs)
System platform set (4pcs.)
Cranked Riser XL 65,5 - 140 cm
TITAN SERVO DRIVE. (need to add controller and PSU)
ATLAS Servo motor for heavier payloads and faster speeds. Controller and power supply not included and will need to be added.
2m straight CEILING TRACK 350mm wide - 250mm interaxis 35mm metal grey pipes track with truss 25x25 and external Vessel for cables
Délai habituel 6 semaines
ATLAS 3m / 300cm Rail section
1m ceiling rail, 500mm width, 400mm center distance, 35 mm metal gray tube rail, Including traverse
Délai habituel 6 semaines
Additional- interchangeable spare pair of stainless steel rails.
Track-wheels set curve (4 pcs.)
Track wheels for CD5
Track wheel set for Dolly CD6
Rocker Plate
Riser Set incl. Hardcase
Dutti Dolly
Délai habituel entre 4 et 6 semaines
The support tubes of different lengths with an outer diameter of 80 mm can be used individually or in combination
Additional- interchangeable spare pair of stainless steel rails. Length : 240 cm / 7 ft 10 inch
1m straight CEILING TRACK 350mm wide - 250mm interaxis 35mm metal grey pipes track with truss 25x25 and external Vessel for cables
Délai habituel 6 semaines
20m Cables CEILING TRACK: 1 x 10m of cable chain, 2 x mounting bracket for chain cable, 2 x 20m RJ45 cable, 2 x 20m BNC RG59 cable, 1 x 20m dolly power supply extension cable, 1 x 20m PTZ power supply extension cable
Délai habituel 6 semaines
20m Cables FLOOR TRACK: 1 x 10m of cable chain, 2 x mounting bracket for cable chain, 2 x 20m RJ45 cable, 2 x 20m BNC RG59 cable, 1 x 20m dolly power supply extension cable, 1 x 20m PTZ power supply extension cable
Délai habituel 6 semaines
Rocker Plate incl. Standard Mount
24V charging station complete for 2 batteries
150 cm (120 cm effective length), 49 inches (47 inches effective length)
2m straight FLOOR TRACK 350mm wide - 250mm interaxis 35mm metal grey pipes track. Vessel for chain with antistatic carpet
Délai habituel 6 semaines
ATLAS Rail Dolly with accessories (Mark 2)
Ring platform incl. Cover
Custom-made for Photogrammetry use
Magnum radio hand control
Set of Wide Wheels, (8pcs), 80 Shore
120 cm (90 cm effective length), 47 inches (35,5 inches effective length)
Trackwheel set 2pcs. for MT 400
MSXL RAILS and Timing BELT, 20m includes: 2x outer rails and 1x belt in ordered total length
Délai habituel 6 semaines
Stainless Steel Curved Track 90° Tight Radius - 10ft Diameter
Délai habituel entre 4 et 6 semaines
150 cm (120 cm effective length), 59 inches (47 inches effective length)
Magnum steer-out extension
Cranked Riser M 47,5 - 87 cm
Stainless Steel Curved Track 8 Foot Section - 20ft Diameter
Délai habituel entre 4 et 6 semaines
Price per meter or 39,37 inches
Foot controllers to pair with the Kairos for using multiple axex simultanteously
Base plate with Euro turnstile mount
80 cm (50 cm effective length), 31,5 inches (20 inches effective length)
Joystick Set, including HMI Control Unit
Hot Buttons for straight and 20 dia. Curved Track (Set of 4)
Délai habituel entre 4 et 6 semaines
Transportsystem "onboard"
Magnum low platform
1,5m straight FLOOR TRACK 350mm wide - 250mm interaxis 35mm metal grey pipes track. Vessel for chain with antistatic carpet
Délai habituel 6 semaines
Stainless Steel 10ft Straight Track
Délai habituel entre 4 et 6 semaines
Additional- interchangeable spare pair of stainless steel rails. Length : 200 cm / 6 ft 7 inch
Additional MS XL TRACK. Price per extra meter or 39,37 inches of MS XL track, comes with: 2x outer rails and 1x belt in ordered total length
Délai habituel 6 semaines
120 cm (90 cm effective length), 47 inches (35,5 inches effective length)
ATLAS 2m / 200cm Rail section
Set of studio wheels standard (8 pcs), 80shore
Slidekamera VARIO - Camera SET
Slidekamera VARIO - Grip SET
ATLAS 1.2m / 120cm Rail section
Interchangeable Rails 160
Pedal Set, including HMI Control Unit
3 Way Leveller Mitchell to Mitchell
TILTA Slider System
Délai de livraison de 4 à 6 semaines
Offset/Central 4-Way leveller (for new Magnum turnstyle)
Hand control unit with programme key board and cable
Set of studio wheels soft (8 pcs), 40shore
1500mm/59.1in slider with quick folding feet and smart brake. Price is for x SLIDER with standard feet, and smart brake. Price does not include optional extras such slider support, tripod mount or transport case.
Riser Adjustable 55-115 cm
Alpha dolly wired hand control
80 cm (50 cm effective length), 31,5 inches (20 inches effective length)
Additional MS XL TRACK. Price per extra meter or 39,37 inches of MS XL track, comes with: 2x outer rails and 1x belt in ordered total length.
Délai habituel 6 semaines
Set of pneumatic wheels (8 pcs)
Angle bracket 4-way levelling, BP: Mitchell
XL Motion Controller
HMI Control Unit
1m straight FLOOR TRACK 350mm wide - 250mm interaxis 35mm metal grey pipes track. Vessel for chain with antistatic carpet
Délai habituel 6 semaines
Additional MS XL TRACK. Price per extra meter or 39,37 inches of MS XL track, comes with: 2x outer rails and 1x belt in ordered total length.
Délai habituel 6 semaines
4 Way Leveller for U-Bangi
Interchangeable Rails 120
320w PSU with ethernet connectivity, required for controlling multiple robots. (Recommended)
Control of carriage with joystick or optional connectable foot pedals
Délai habituel 6 semaines
Stainless Steel Track Straight 8 Foot Section
Délai habituel entre 4 et 6 semaines
ATLAS Rail 0.8m / 80cm Rail section
Additional MS XL TRACK. Price per extra meter or 39,37 inches of MS XL track, comes with: 2x outer rails and 1x belt in ordered total length
Délai habituel 6 semaines
ATLAS Rail cable guide for 3m track. Typical with based cables.
Track, Stainless Steel, 4ft Straight
Délai habituel entre 4 et 6 semaines
10m Cables FLOOR TRACK: 1 x 5m of cable chain, 2 x mounting bracket for cable chain, 1 x 5m of cable chain, 2 x mounting bracket for cable chain, 2 x 10m RJ45 cable, 2 x 10m BNC RG59 cable, 1 x 10m dolly power supply extension cable, 1 x 10m PTZ power supply extension cable
Délai habituel 6 semaines
10m Cables CEILING TRACK: 1 x 5m of cable chain, 2 x mounting bracket for cable chain, 2 x 10m RJ45 cable, 2 x 10m BNC RG59 cable, 1 x 10m dolly power supply extension cable, 1 x 10m PTZ power supply extension cable
Délai habituel 6 semaines
Riser/Bazooka - adjustable 39-73 cm
1000mm/39.4in slider with quick folding feet and smart brake. Price is for x SLIDER with standard feet, and smart brake. Price does not include optional extras such slider support, tripod mount or transport case.
800mm/31.5in slider with quick folding feet and smart brake. Price is for x SLIDER with standard feet, and smart brake. Price does not include optional extras such slider support, tripod mount or transport case.
TITAN STEPPER DRIVE. Motor to turn TITAN Slider from manual to powered (need to add controller and PSU)
ATLAS Stepper motor, used for smaller payloads and lower speeds. Controller and power supply not included and will need to be added.
Additional MS XL TRACK. Price per extra meter or 39,37 inches of MS XL track, comes with: 2x outer rails and 1x belt in ordered total length.
Délai habituel 6 semaines
The low and offset rig may be mounted in 2 different setup variants e.g. to achieve a very low camera position
Master Track, curved 45°
Adjustable off-set arm
24 volt battery with charge level indicator
Turnstile for 4x4 Dolly
Transport case for TITAN 1500 Slider.
ATLAS MODULAR travel transport case for 0.8m and 1.2m slider rail
Telescopic steering rod
Adapter mount to attach a DJI RONIN Gimbal system to sliders. Best used with Kairos controller for controlled movements
Track-wheels set
Counterweight Kit FOR TCP-TM50 Totem (4pcs)
Délai habituel 6 semaines
185w PSU to power a single device , slider drive or remote head.
Foldable track 39", straight 7,5ft
ATLAS MODULAR travel transport case for 1.2m slider rail
Transport case for TITAN 1000 Slider.
Price per extra meter or 39,37 inches including custom made rails, belt and break
ATLAS Rail cable guide for 2m rail. Typical with based cables.
Levelling legs for CD7 (4 pcs.)
Foldable track 24,5", straight 7,5ft
MSXL RAILS and Timing BELT, 10m includes: 2x outer rails and 1x belt in ordered total length
Délai habituel 6 semaines
Additional- interchangeable spare pair of stainless steel rails. Length : 100 cm / 3 ft 3 inch
Angle bracket for Low and offset rig (Ball adapter)
20cm camera riser plate with male and female euro mount
Foldable track 39", straight 5ft
Base plate with Euro adapter
Clamp Riser Adjustable 48-88 cm
MovieJib Head with Mitchell mount
Additional- interchangeable spare pair of stainless steel rails. Length : 80 cm / 2 ft 7 inch
ATLAS Rail cable guide for 1.2m rail. Typical use with based cables
10cm camera riser plate with male and female euro mounts
ATLAS Rail 2m cable guide for use with 0.8m and 1.2m rail. Typical use with based cables
Levelling legs for CD5 (4 pcs.).
Push bar for Magnum Dolly
Foldable track 24,5", straight 5ft
Angle bracket for Low and offset rig (Mitchell adapter)
ABC Light Track 6.40 m incl. soft-bag
ABC Light Track 6.40 m
MovieJib Head with Mitchell mount Euroclamp
Additional- interchangeable spare pair of stainless steel rails
Slidekamera VARIO - High Hat SET - extended
Bigfoot Platform extension XL (1pcs)
Rotable adapter with brake
Platform(1 pc.)
Set MasterTrack Profle 2,30m (2 x)
Case for bullstand 120 tripod
Power Supply 24 V
Délai habituel 6 semaines
Tube Supports HR (X2)
Tube Supports VR (X2)
20cm camera riser plate with mitchell mount
Telescopic seat arm for Alpha Dolly
Steering rod standard
License for Panasonic PTZ control via Panasonic remote camera consoles, compatible with: Panasonic RP-150, Panasonic RP-60
Délai habituel 6 semaines
Enables the capability to control the PanaTrack/MS XL via SONY PTZ controller like RM-IP500
Délai habituel 6 semaines
Round-d-Round Doorway Dolly Seat
Délai habituel entre 4 et 6 semaines
10cm camera riser plate with mitchell mount
90° Euro Clamp Euro to Euro
Foldable track 39", straight 3ft
20cm camera riser plate with 150mm bowl adapter
ATLAS Rail Bracket with Pneumatic Bumpers (2pc set)
Steering rod short
Side ball, extra long 150mm
Adaper for Sytem low rig
Bowl Adapter on U-Bahngi
Side ball, extra long 100mm
Hand-held controller tester
20cm camera riser plate with male euro mount
Wireless Ethernet Link, between MS XL carriage and Panasonic RP-150 controller, includes Sender and Receiver Unit
Délai habituel 6 semaines
20cm camera riser plate with 75/100cm bowl adapter
Off-Set Arm short
10cm camera riser plate with 150mm bowl adapter
Master track profile (1.60m) for scooter dolly (2 x).
Slidekamera VARIO - High Hat SET
10cm camera riser plate with male euro mount
Long camera extension (Mitchell)
Levelling leg extension set (4 pcs.)
Control Unit Kit for Multi Slider (not Multi Slider XL) including Camera Cable (choose option), Mobile App (no mobile phone included), Motor, Belt and Timing Belt Pulley
10cm camera riser plate with 75/100mm bowl adapter
Set of carrying bars
Foldable track 24,5", straight 3ft
MSXL RAILS and Timing BELT, 5m includes: 2x outer rails and 1x belt in ordered total length
Délai habituel 6 semaines
Cushioned seat with auto-rewind seat belt
Adapter long for low rig "L"
Battery Pack for MS Swift and MS XL
Euro Off-Set - long, Euro to Euro
High-End stand for heavy weight, Stand including Spigot Mounting Plate with Thread on Top for highest stability of the MS XL System
Délai habituel 6 semaines
DUAL SUPPORT for sliders
Euro Off-Set - short, Euro to Euro
Drive ramps 24,5" / 62
Extension for push bar - 2pcs
PTZ license code for a Slidelink adapter
20cm camera riser plate
Trolley for weight carrier with studio wheels (pneumatic on request)
Riser 50 cm / 20In
Adapter from Mitchell to Ball adapter
Euromount adapter track connector
Slider with slider case
Délai habituel entre 2 et 3 semaines
Riser 40 cm / 16In
Adapter from mitchell on Euromount with short bolt
Mini low rig
Adapter for mini low rig "M"
Slidekamera VARIO ARM - Extended 27"
Offset short with Euro clamp (for Magnum turnstyle)
Riser 30 cm / 12In
10cm camera riser plate
Riser 20 cm / 8In
Ball Adapter Mitchell
Control Unit for Multi Slider (not Multi Slider XL) including Camera Cable (choose option) and Mobile App (no mobile phone included)
Control Unit for MS SWIFT (not Multi Slider XL) including Camera Cable (choose option) and Mobile App (no mobile phone included)
For mounting the MS XL
Master track profile (0.90m) for scooter dolly (2 x).
Adapter for assistant seatarm (for new Magnum turnstyle)
Euro Clamp for U-Bangi
Adapter to Bowl 150mm
Adapter to flatbase
Riser 10 cm / 4In
Counterbalance rod
PTZ Quick Release Adapter - 1/4" or 3/8" mounting. Can also be used with all Slidekamera heads using the native 3x M6 mount
Euro Mount Male and Female (Set)
Offset Euro adapter extension
Seat or platform mount
Short camera extension
20m Belt
Délai habituel 6 semaines
Adapter for mini low rig
System low rig tube connector 765 mm
Slider with slider case
Délai habituel entre 2 et 3 semaines
Low shot plate
Adapter Mitchell
Tube support VR
Tube Support HR
Telescopic-Pushbar for Rocker Dolly
Dragonframe license code for a Slidelink adapter
Adapter Euromount
Cable management wagon
Délai habituel 6 semaines
Track end stop set (2 pcs.)
Off-Set rig for MiniJib
Adapter Euromount
Additional platform for 4×4 Dolly (1 pc.)
Universal for Tripods, Dollies, Etc., No Tools or Hardware Required, Precision Machined
Délai habituel entre 4 et 6 semaines
Slidekamera VARIO ARM - Extended 18"
Quick release system- Long camera plate
Track Connector (double)
Power Supply
System low rig end piece Euromount
ATLAS Rail Bracket Standard (2 pc set)
15m Belt
Délai habituel 6 semaines
Euro Mount Female
System low rig tube connector 400mm
Ground levelling plate
Swivel arm adapter for Hand Control
Platform extension
Anodized Aluminium Tubes for Sliders HR &, VR
Carrier for 6 crane weights
Stative feet (3 pcs)
Base rail Connector.
Pushbar for MT Grip Kit
System low rig tube connector 300 mm
Adapter for steering rod with 1/4? and 1/8? threads
Universal for Tripods, Dollies, Etc., No Tools or Hardware Required, Precision Machined
Délai habituel entre 4 et 6 semaines
System low rig tube connector
Narrow gauge adapter 39" to 24,5"
Universal for Tripods, Dollies, Etc., No Tools or Hardware Required, Precision Machined
Délai habituel entre 4 et 6 semaines
Quick release system- short (DV) camera plate
Power Signal Cable 20 meter
Délai habituel 6 semaines
Round seat
Mitchell Base Plate
Euromount on 28mm lightstud
Slidekamera VARIO ARM - Standard 15"
Universal Track End
75/100mm quick mount set for ATLAS MODULAR
Studio wheels 4pcs
Weight carrier for up to 10 x 16kg weights easy access
Narrow gauge adapter 24,5" to 14,2"
Euromount 80/120mm with clamp bolt
System low rig end piece
Slidekamera VARIO ARM - Classic 11"
Slidekamera VARIO ARM - Standard 11"
Charging Station for Large Battery Pack
Soft bag for tracks 2,30m
Battery tester
Adapter for Telescopic Seat
Base plate for several adapter (mitchell/ ball)
Multi adapter (for steering rod)
Bag for Scottertrack 160cm
Slidekamera VARIO ARM - Standard 8"
Drive ramps 39" / 100
Seat arm vertical 30 cm / 12In
10m Belt
Délai habituel 6 semaines
STANDARD side feet set for X SLIDER
MT Grip Kit horizontal hinge
Euro Adapter N
System low rig adapter big (for system low rig tube 80 mm)
Seat arm vertical 20 cm / 8In
Mitchell Plate
Falcon Eyes Camera Slider STK-04-1 100 cm
Délai habituel entre 2 et 4 semaines
Bag for Track 90cm.
Track connector with Mitchell base plate
Adapter for Sytsem Low Rig Tube with 3 screws
Platform for MT Grip Kit 1 pc
Seat arm combined 20 cm / 8In
Seat arm vertical 10 cm / 4In
Angle adapter
Power Signal Cable 10 meter
Délai habituel 6 semaines
Mitchell Mount
Euro Adapter with 3 screws and threads (for new Magnum)
ABC Light Track Curve (1/16 circle)
Seat arm combined 30 cm / 12In
Seat arm combined 10 cm / 4In
100mm bowl for slider system
Délai de livraison de 4 à 6 semaines
Hand control holder
3/8" universal mount
Slidekamera VARIO ARM - Classic 8"
Mitchell base plate
Steering angle fixation
BASIC side feet set for X SLIDER
V-Mount Adapter & Plate SET
Falcon Eyes Mini Turntable T360-A3 60 cm up to 40 Kg
Délai habituel entre 2 et 4 semaines
Flanschrohr hartcoatiert
Spanner for pneumatic wheels
Power Signal Cable 5 meter
Délai habituel 6 semaines
Hand control holder short
Hand control holder short for telescopic steering rod
Slidekamera VARIO Plate 10,6"
MT tool for Mitchell screw
Euro Mount Male
Power Signal Cable 3 meter
Délai habituel 6 semaines
Adapter ring 100mm to 75mm
Magic Arm with 3/8 screw
Falcon Eyes Mini Turntable T360-A1 45 cm up to 40 Kg
Délai habituel entre 2 et 4 semaines
Clamp assembly 2 pcs set. Adapter used for mounting ATLAS Slider in underslung mode. 2m rail requires 4pcs. 3m rail requires 6pcs.
Universal safety plate for ball adapter
Counterweight 16 kg
Slidekamera VARIO ARM - Micro 4"
Bowl Insert 150 mm to 75 mm
5m Belt
Délai habituel 6 semaines
Smart Brake for X Slider
V-Mount Adapter
Slidekamera VARIO Triple connecting clamp
shift handle
Panasonic PTZ 12V power supply cable, 2pin Molex to 4pin XLR
Délai habituel 6 semaines
Panasonic PTZ 12V power supply cable, 2pin Molex to 4pin XLR
Délai habituel 6 semaines
Panasonic PTZ 12V power supply cable, 2pin Molex to 4pin XLR
Délai habituel 6 semaines
Clamp bolt 25 mm
Counterweight 8 kg
Adapter 75/100mm self-leveling disc for ATLAS SLIDER
Spigot Mounting Plate with 3/8" Thread on Top for highest stability of the MS XL System
Délai habituel 6 semaines
Adapter set Master Track on MovieTrack
Battery Pack
AK-101 LG sliding plate for AKC-3 adapter
Slidekamera VARIO - Long extension arm 10,6"
Key extension for Mitchell fixation
Counterweight 4 kg
Slidekamera VARIO - Short extension arm 6,3"
Falcon Eyes Mini Turntable T360-A2 25 cm up to 10 Kg
Délai habituel entre 2 et 4 semaines
Low-boy-adapter 28mm for light stand
Bridge plug for 24V operation
Footrest tube for system low rig
Slidekamera VARIO - Mini extension arm 3,5"
Slidekamera VARIO Articulated short arm 2,4"
Slidekamera VARIO Rod clamp 15mm
Slidekamera VARIO Hot Shoe Mount
Slidekamera VARIO Connecting clamp
Slidekamera VARIO Articulated long arm 4,7"
End stop track mounted.
AF-8 SH 3/8" and 1/4" thin mounting plate for X-slider
AF-24 adapter for mounting photo-video accessories on Giant tripods
V-Mount Plate
Angle support mounting plate 1/4 " and 3/8"
Connector Bolt for track connector
Connection bolt
AK-101 sliding plate for AKC-3 adapter
Counter screw for fluid heads with internal thread
Counter screw for Flatbase
Counter screw for fluid heads with internal thread
Counter screw for Flatbase
Counter screw for bowl 150mm
Counter screw for bowl 100mm
Counter Screw for Bowl 100mm
Counter screw for bowl 150mm
Adapter f.steering rod
Slidekamera VARIO Ball 3/8"
Protection cap for trackend section, male
Protection cap for trackend section, female
Camera trigger cables for connecting control unit to Nikon
Camera trigger cables for connecting control unit to Sony
Camera trigger cables for connecting control unit to Sony
Camera trigger cables for connecting control unit to Panasonic
Camera trigger cables for connecting control unit to Olympus
Camera trigger cables for connecting control unit to Samsung
Camera trigger cables for connecting control unit to Nikon
Camera trigger cables for connecting control unit to Nikon
Camera trigger cables for connecting control unit to Fuji
Camera trigger cables for connecting control unit to Fuji
Camera trigger cables for connecting control unit to Canon
Camera trigger cables for connecting control unit to Canon
Slidekamera VARIO Reducing spacer
Tie brace
Track Wedge (each)
Délai habituel entre 4 et 6 semaines
Protection cap for Master Track red
Camera Wedge (each)
Délai habituel entre 4 et 6 semaines
Round D Doorway Dolly Crate
Délai habituel entre 4 et 6 semaines
Fixing bolt for low boy
Fixed track 24,5", straight 3ft
Fixed track 24,5", straight 5ft
Fixed track 24,5", straight 7,5ft