Kramer PT-572+ - HDMI over Twisted Pair Receiver

89179

Neuf

The PT-572+ is a DGKat twisted pair receiver for HDMI signals. The PT-571 converts an HDMI...
Lire la suite
Prix constructeur :
293,00 CHF HT

Prix Visuals :

249,05 CHF


269,22 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 84 mois
Service interne : révision, réparation & backup.

Disponibilité : clock Délai habituel entre 2 et 4 semaines

- +

89179
En savoir plus  

The PT-572+ is a DGKat™ twisted pair receiver for HDMI signals. 

The PT-571 converts an HDMI signal to a single twisted pair signal and the PT-572+ converts the twisted pair signal back to an HDMI signal.

Max. Data Rate  - 4.95Gbps (1.65Gbps per graphic channel).

HDTV Compatible.

HDCP Compliant.

DGKat™ Signal Integration  - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.

HDMI Support.

3D Pass-Through.

System Range  - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable.

Cable  - Requires Shielded Twisted Pair (STP) cable. For optimum range and performance use, use Kramer's BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.

EDID PassThru  - Passes EDID signals between the source and display.

Status LED  - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached.

Power Connect™ System  - A single connection to the transmitter or the receiver powers the system when the devices are within 270ft (90m) of each other.

Ultra-Compact Pico TOOLS™  - 4 units can be rack mounted side−by−side in a 1U rack space with the optional RK−4PT rack adapter.


Applications:
-Board, conference, and training rooms.
-Presentation systems.Signal distribution and home theater.

    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu