Sonifex RB-SS10 - 10 Way Stereo Analogue Source Selector/Mixer

52292

Neuf

10 Way Stereo Analogue Source Selector/Mixer
Prix constructeur :
1 076,33 CHF HT

Prix Visuals :

968,70 CHF


1 047,16 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 12 mois
Service interne : révision, réparation & backup.

Disponibilité : clock Délai habituel entre 2 et 4 semaines

- +

52292
En savoir plus  

The RB-SS10 10 way stereo analogue source selector/mixer is a 1U rack-mount unit that produces a stereo analogue audio output from 10 selectable stereo analogue sources. There are 10 illuminated front panel push-buttons, which select and indicate the current channel selection. The selection and indication is also available through a remote connector on the rear panel. To stop accidental front panel selection there is a remote input to inhibit the front panel buttons.

Two of the stereo inputs are on XLR so that you can hot-plug audio sources, e.g. portable recorders. As well as being able to act as a source select module, the RB-SS10 can act as a mixer, by enabling the mix mode (using the remote input).

The gain for left and right inputs can be individually adjusted by using the pre-set potentiometers on the front panel. As well as routing the selected audio signal, the unit will also route a remote signal input through the remote connector to the selected input source, for starting external audio equipment such as a CD player.

The front panel headphone output has its own volume control, which is independent of the level adjustment for the main outputs, and has a maximum output level of +12dBu. The volume control can be made to also alter the output level of the main XLR outputs by using a switch on the rear panel to enable/disable this feature.

There is a designation strip on the front panel, useful for giving the buttons a meaningful description. The strip covers the input gain controls so that once configured, they can’t easily be altered - ideal for installation work. The LED on the front panel is used to indicate that power is present on the unit.


 


 



Technical Specification For RB-SS10



Audio Specification



Input Impedance:



20kΩ bridging



Output Impedance:



<50Ω



Max Input Level:



+28dBu



Max Output Level:



+28dBu



Frequency Response:



20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)



Input Gain Range:



Adjustable 8dB loss to 20dB gain (L & R adjust) via front panel adjustable preset potentiometers



Common Mode Rejection:



>66dB typically



Noise:



-96dB unity gain ref +8dBu



Max Headphone Output Level:



+12dBu



 



 



Connections



Inputs:



4 x XLR 3 pin female (2 x stereo) (balanced, can be unbalanced)
2 x 25 way D-type socket (female) (4 stereo balanced channels on each)



Outputs:



2 x XLR 3 pin male (stereo balanced, can be unbalanced)



Remote Start I/O:



25 way D-type plug (male)



Remote Select/Switch Inputs:



25 way D-type socket (female)



Status Outputs:



25 way D-type socket (female)



Mains Input:



Filtered IEC, 110V-120V, or 220-240V 
switchable, fused, 6W maximum



Fuse Rating:



Anti-surge fuse 160mA 20 x 5mm (230VAC)
Anti-surge fuse 315mA 20 x 5mm (115VAC)



 



 



Equipment Type



RB-SS10:



10 way stereo analogue source selector/mixer



 



 



Physical Specification



Dimensions (Raw):



48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)



Dimensions (Boxed):



58.5cm (W) x 22.5cm (D) x 7cm (H)
23” (W) x 8.9” (D) x 2.8” (H)



Weight:



Nett: 1.5kg  Gross: 2.0kg
Nett: 3.3lbs Gross: 4.4lbs


    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu