Au service des professionnels et passionnés
177034
Neuf
Envoyer à un ami
Destinataire :
* Champs requis
OU Annuler
Envoyer à un ami
Destinataire :
* Champs requis
OU Annuler
Aja Analog Video 1 X 6 Distribution Amplifier
The C10DA is a 1x6 Analog Distribution Amplifier with support for NTSC and PAL offering the ability to distribute multiple copies of the incoming signal or extend content of composite video with gain adjustment to compensate for long cable runs where needed. The C10DA can also be used to DA Tri-Level sync in an HD facility when a sync signal is fed externally into the Video Input.
Universal Power Supply
All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world.
Compact and Portable
AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.
AJA Mini-Matrix
Information on the complete line of AJA Mini-Converters is now available as a mobile app on iOS. The Mini-Converter product line is extensive and this app helps you find the right converter for any situation, wherever you are.
Features
- Compact 1 x 6 Analog Distribution Amplifier
- NTSC
- PAL
- May be used to distribute tri-level sync when a syync signal is fed into the Video Input for HD workflows
|
Specifications |
|
Formats |
NTSC |
|
Inputs |
1 Analog, Differential, 1 x BNC |
|
Outputs |
6 Analog, 6 x BNC |
|
Termination |
75 Ohms or nonterminated |
|
Video Bandwidth |
0 – 6 MHz +/- 0.1dB |
|
Gain |
-3dB, -2dB, -1dB, 0dB, +1dB, +2dB, or +3dB, +/- 0.3dB |
|
Diff Gain |
0.15%, not load dependent |
|
Diff Phase |
0.1 degree, not load dependent |
|
H/V Tilt |
Less than 0.1% |
|
Response Variation |
Less than 0.1dB 1 to 6 loads |
|
Coupling |
DC |
|
Max Common Mode Signal |
10Vp-p |
|
Return Loss |
More than 35dB to 6 MHz all inputs and outputs |
|
Output Isolation |
More than 40dB |
|
User Controls |
External Dipswitch |
|
Size (w x d x h) |
5.8" x 3.1" x 1.0" (147mm x 79mm x 25mm) |
|
Weight |
0.8 lb (0.3 kg) |
|
Power |
5VDC Regulated, 2 Watts, power supply required, included with purchase |
|
Environment |
Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F) |