Sonifex RB-DAC1 - Digital to Analogue Converter

52257

Neuf

Digital to Analogue Converter
Prix constructeur :
786,53 CHF HT

Prix Visuals :

747,20 CHF


807,73 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 12 mois
Service interne : révision, réparation & backup.

Disponibilité : clock Délai habituel entre 2 et 4 semaines

- +

52257
En savoir plus  

Using 24 bit, 96kHz capable devices, the RB-DAC1 D/A Converter is a 1U rack-mount which produces a stereo balanced XLR or unbalanced phono output from an incoming AES/EBU or S/PDIF digital input signal. There is also a headphone output with volume control for monitoring purposes.

The analogue outputs have an output level control, allowing full-scale settings selectable from +12dBu, +18dBu or +24dBu. The RCA phono outputs have a further 8.5dBu attenuation incorporated.

There is a button to select either the AES/EBU or S/PDIF input for the D/A converter, which is located on the rear panel. Additionally, if de-emphasis is selected, the RB-DAC1 will decode 50/15µs emphasis when indicated by certain channel status bits in the incoming digital audio data.

When operating, the front panel power LED flashes whenever the unit is not synchronised to the incoming digital signal.


 


 



Technical Specification For RB-DAC1



Audio Specification



Maximum Output Level:



+24dBu balanced, +14dBu unbalanced
+12dBu headphone



Output Impedance:



<50Ω balanced, <75Ω unbalanced



Dynamic Range:



100dB



Gain Range:



Selectable 12dBu, 18dBu or 24dBu output level, ref FSD



Headphone Output:



Drives 150mW into 32Ω to 600Ω professional headphones



Distortion & Noise:



<0.01% THD + N @1kHz, ref 0dBu



Sample Freq. Range:



30kHz - 100kHz



 



 



Operational Controls



Digital Input Select:



AES/EBU or S/PDIF, via push-button



Gain Select:



DIP switch



De-emphasis On/Off:



DIP switch



 



 



Connections



Digital Inputs:



1 x AES/EBU XLR 3 pin female
1 x S/PDIF RCA phono



Analogue Outputs:



2 x XLR 3 pin male (balanced) 
2 x RCA phono (unbalanced)



Headphone Output:



1 x ¼” (6.35mm) A/B-gauge 3-pole stereo jack sockets



Mains Input:



Filtered IEC, 110V-120V, or 220-240V, fused, 10W max



Fuse Rating:



Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)



 



 



Equipment Type



RB-DAC1:



Digital to analogue converter



 



 



Physical Specification



Dimensions (Raw):



48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)



Dimensions (Boxed):



58.5cm (W) x 22.5cm (D) x 7cm (H)
23” (W) x 8.9” (D) x 2.8” (H)



Weight



Nett: 1.4kg  Gross: 2.0kg 
Nett: 3.1lbs Gross: 4.4lbs


    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu