Neumann KM 185 - Hypercardioid Microphone, Nickel

184141

Neuf

Microphone with small diaphragm, condenser, hypercardioid, XLR-3F, 48V simplex, nickel, with...
Lire la suite
Prix constructeur :
803,89 CHF HT

Prix Visuals :

763,70 CHF


825,55 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 24 mois
Service interne : révision, réparation & backup.

Disponibilité : clock Délai habituel entre 2 et 4 semaines

- +

184141
En savoir plus  

The matte black KM 185 MT Microphone from Neumann is a hypercardioid pattern, pressure gradient condenser microphone intended for live sound reinforcement and broadcast, as well as recording applications.

The KM 180 series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal.

The KM 185 MT is powered via +48V phantom power. Its 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 185 provides attenuation at the off-axis sections of the mic, and is suitable for X,Y and ORTF stereo miking, announcer's mic for broadcast, spot capturing of drum overheads, strings, wind instruments, percussion, piano, and amp cabinets. The KM 185 handles sound pressure levels up to 142 dB allowing close miking of instruments high in transient (peak) level response.

Hypercardioid Polar Pattern

The hypercardioid polar pattern offers greater attenuation at the off-axis sections of the microphone, resulting in a tighter pattern with even less noise caused by ambiance.

KM 100 Based Output Stage

The KM 185 features the same output stage electronics as the KM 100. Transformerless circuitry and quiet balanced output design ensure a clean, high-gain output signal without any coloration. The KM 185 is powered via +48V phantom power, and its 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 185 can handle sound pressure levels up to 142 dB, allowing fairly close miking of instruments.

Compact Rugged Construction

The slim design and rugged construction allow easy microphone placement while remaining road worthy.





Operating Principle Pressure Gradient
Transducer Condenser
Polar Pattern Hypercardioid
Frequency Range 20 Hz to 20 kHz
Signal to Noise Ratio 70 dB CCIR
79 dB A-Weighted
Equivalent Noise Level 24 dB CCIR
15 dB A-Weighted
Maximum SPL 142 dB SPL
THD 0.5%
Impedance 50 Ohms
Load Impedance 1000 Ohms
Sensitivity 10 mV/Pa at 1 kHz into 1 kOhms
    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu