Neumann KH 80 DSP A W EU - Active DSP Studio Monitor - White

190932

Neuf

The KH 80 DSP two-way active bi-amplified monitor features a DSP engine with network...
Lire la suite
Prix constructeur :
491,18 CHF HT

Prix Visuals :

466,62 CHF


504,42 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 24 mois
Service interne : révision, réparation & backup.

Disponibilité : clock Délai habituel entre 2 et 4 semaines

- +

190932
En savoir plus  

Neumann Active DSP Studio Monitor - White

The Number 1 For 0 Compromises

With its digital core, the KH 80 DSP enables filtering functions and room adjustment options, which brings reference level reproduction to any environment. Even with its compact design, it has extraordinary reserve capacity - as well as the classic strengths of the Neumann monitor philosophy: clearly defined dispersion angle, distortion-free design and sophisticated material selection.

The Perfect Sound Of Higher Mathematics At Work

The Neumann developers know every nuance, every angle and every wave reflection of the KH 80 DSP. It sounds so pure because they are directing every sound wave so precisely. The KH 80 DSP’s design is based on computer simulations that calculate with a level of accuracy that no one other than Neumann does. The Mathematical Modeled Dispersion Waveguide (MMD™) provides the studio series with a solid base for precise sound direction that remains unique. Maths has never sounded so good.

Neumann Even Includes The Biggest Unknown Factor In Our Calculations: Your Room

It might be a project studio, an outside broadcast van, a corner at work or just a brick building: The room defines the sound. Surfaces and corners in the room cause interference, diffraction, reflection, and refraction: all are forms of distortion. For a really true sound, without acoustic-physical “accidents”, you normally need expensive equipment plus plenty of time and expertise to align it correctly – or smart algorithms. An easy adjustment to the monitor position (free standing, small/medium/large desk) is possible via the rear "Acoustical Control" switch.

A Tool For Everyone Who Has Professional Standards

Highest quality components, high-end protection systems and power reserves are what you would expect from this studio class product even under the most demanding circumstances. Its design makes the KH 80 DSP a versatile near-field monitor, which delivers professional-quality sound wherever you need it – in project and music studios, editing and broadcasting rooms or in outside broadcast vans. Some of our customers like it so much, they use the KH 80 DSP in their living rooms. Why not? After all, the KH 80 DSP delivers digital precision for a masterpiece of analog technology: your ears.

The KH 80 DSP And The Neuman.control iPad App

The iPad connects to the KH 80 DSP via a standard IP network with an Ethernet cable between the router and the monitor. In case of a 2.0 stereo configuration with the KH 750 DSP the stereo pair receives the analog audio signal directly from the subwoofer.

The system offers the following functions in the setup/adjustment phase:


Setup

- 1, 2, 4, 5, 7 or 9 loudspeakers

- Identication of all loudspeakers in the network

- Adjustment of standby time and level, system delay (lip sync) and logo brightness


Alignment

- Guided Alignment – a patented process where you are asked simple questions about the room and the loudspeaker/subwoofer position; the app adjusts the response of each loudspeaker/subwoofer accordingly.

- Manual Alignment – expert users have complete freedom to adjust an 8-band fully parametric equalizer, levels and the time-of-flight delay in each loudspeaker/subwoofer as they wish. Manual Alignment can also be used to edit Guided Alignments in a more detailed way.

After setup, the iPad can be removed if necessary; the settings are permanently stored in the monitors.


Hundreds Of Good Reasons From The Neumann Philosophy

The KH 80 DSP has also been developed true to the Neumann philosophy for monitor loudspeakers. Every component, every shape, every signal and every wave motion is a consequence of this philosophy. No form or component is there without reason. There are hundreds of tangible reasons built into the KH 80 DSP, which all stand for exceptionally pure and neutral sound. These include, for example, curvatures of the housing that reduce edge diffraction. Also included is the pistonic output of the bass driver which does not give rise to harmonic distortions, even with the highest sound peaks. Some of these reasons are obvious in the KH 80. Others Neumann prefers to keep to itself. But together, each can be heard – sound professionals in both large and small studios all around the world can testify to this.

In-house simulated tweeter with alloy fabric dome

- Latest modeling techniques used to minimize non-linear (harmonic and intermodulation) distortion

- Low-distortion high frequency reproduction


Elliptical Mathematically Modelled Dispersion (MMD) waveguide

- Smoother off-axis response

- More forgiving of diverse acoustical environments


Wide horizontal dispersion

- Freedom of movement across the mixing console

Narrow vertical dispersion

- Reduces reflections off the mixing console

Two-color Neumann logo

- Displays operation status and activation of the extensive protection system

In-house modelled long-throw composite sandwich cone bass driver with Extremely Linear Force Factor (ELFF) and flow optimized die cast basket.

- Damping of break up modes brings low distortion at high sound levels

- Linear pistonic motor gives a very low harmonic distortion even at high excursions

- Reduced air noise and improved rocking modes


Robust metal grilles

- Protects against mechanical damage

Large high-capacity flow-optimized bass reflex ports with pipe resonance damping

- Fast bass transient response

- Reduced bass compression at high output levels

- No coloration from organ pipe resonance

- Easier to mount in tight spaces


Compact polycarbonate composite cabinet

- Robust package for a long life

- No standing wave resonances


One-piece front panel with no discontinuities

- Reduced diffraction and smoother frequency response

Standby function

- Reduces power consumption when product is not in use

Control function 

- Use the back panel controls or the control set defined by the Neumann.Control iPad app

4-position low-mid acoustical control

- Compensates for nearby desktops

- Fast acoustical set up in mobile applications

- Repeatable acoustical settings after moving loudspeakers


Wide range input gain and output level controls

- Easier interfacing with signal sources

Fully documented extensive mounting hardware range

- More flexibility in mounting cabinets in more diverse locations and backwards compatible to previous products

- Easy advanced planning for installations


Universal double-insulated switched-mode power supply (100 - 240 V)

- One version works in any country and robust to poor quality mains supply

- Ground loops are impossible


Network connector using standard IP protocol and your existing network infrastructure

- Loudspeaker system can be controlled via the Neumann.Control iPad app

Analogue input socket can accept XLR or 6.3 mm (1/4”) Jack plugs, electronically balanced with completely symmetrical internal signal chain.

- Completely symmetrical internal signal routing minimizes noises caused by external electromagnetic interference


Production consistency due to automated computer optimized alignment in final testing

- Any KH 80 DSP is “pair matched” to any other KH 80 DSP

Separate fast acting thermo limiters for woofer and tweeter to protect the voice coils and power amplifiers

- Woofer soft clip and excursion limiters

- Fast acting and highly reliable

- Allows extraction of the maximum performance


Low heat dissipation amplifiers with large headroom and overheat limiting

- Improved transient response

- Assured reliability and safety


Linear phase crossover

- Flat phase response for timing transparency

With Neumann.Control iPad app

- 8 x Precision Alignment acoustical controls: Accurate and flexible alignment of the loudspeaker in the room and within systems

- Lip-sync delay: To align audio and video signals up to 1.75 frames at 50 Hz or 2.1 frames at 60 Hz

- Time-of-flight delay: To compensate for listening distance differences up to 24 m (79 ft.)

- Dimming the Neumann logo for low lighting level conditions or behind the screen applications


 




 



Specifications



 



Free field frequency response ±6 dB



53 Hz - 21 kHz



Free field frequency response ±3 dB



57 Hz - 21 kHz



Free field frequency linearity deviation between 100 Hz and 10 kHz



± 0.7 dB



Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced



±0.26; ±0.23; ±0.17 dB



Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu)



<20 dB(A) SPL



Sine wave output with a THD < 0.5 % at 1 m in half space



90 dB SPL (>200 Hz)



Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz)



108.8 dB SPL



Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz)



102.8 dB SPL



Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz)



92.1 dB SPL



Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions



104 dB(C) SPL



Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range)



93 dB(C) SPL



Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer)



100 dB(C) SPL



Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range)



88 / 93 dB(C) SPL



Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer)



91 / 96 dB(C) SPL



Analog input(s)



XLR / 6.3 mm (¼”) Jack: analog electronically balanced



Analog input impedance



14k Ohms



Max. input level



+24 dBu for 94 dB SPL setting+18 dBu for 100 dB SPL setting+10 dBu for 108 dB SPL setting+4 dBu for 114 dB SPL setting



Common mode rejection ratio (CMRR)



>56 dB @ 15 kHz



Volume control



via Neumann.Control software



Volume control range; resolution



0 - -∞ dB; 0.1 dB



Input gain control (sensitivity)



0 dB - -15 dB



Output level control (output level in 1 m based on 0 dBu input level)



94; 100; 108; 114 dB SPL



Digital converter: resolution; design



24-bit DAC; Δ∑



Digital converter: sampling rate



48 kHz



Digital internal sampling rate



48 kHz



Dynamic range A-D



114 dB(A)



Dynamic range A-D-A



111 dB(A) woofer; 112 dB(A) tweeter



Dynamic range D-A



114 dB(A) woofer; 117 dB(A) tweeter



Latency



2 ms (A-D-A linear phase)



Delay: User adjustable delay range



0 - 70 ms



Delay: Resolution: time; distance



0.1 ms; 3.44 cm (1 3/8”)



Delay: Max. frames Audio-video synchronisation (lip sync)



1.75 (40 ms frames); 2.1 (33 ms frames)



Delay: Time-of-flight maximum distance



24 m (79 ft)



Controller design



Digital; active



Crossover frequency



1.8 kHz



Crossover slope



48 dB/oct; 8th order with phase correction



Equalization: Low-Mid



0; -1.5; -3; -4.5 dB



Equalization: via Neumann.Control software



8 x full parametric IIR + low / high shelf global balance



FIR phase correction



Linear phase (170 Hz - 16 kHz; +/- 45°)



Protection circuitry



Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers



Infrasonic filter: frequency; slope



61 Hz; 12 dB/oct.



Remote control



Neumann.Control software via an RJ45 connector carrying standard IP data



Display: On; Normal Operation



Neumann logo “White”



Display: Identification



Neumann logo “Rosé”



Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute



Neumann logo “Red”



Display Brightness



via Neumann.Control



Output power woofer amplifier (THD+N with limiter deactivated: 10%)



120 W



Output power tweeter amplifier (THD+N with limiter deactivated: 10%)



70 W



Output power woofer amplifier (THD+N with limiter deactivated: 0.1%)



90 W



Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%)



50 W



Mains Power Supply: input voltage; frequency



100-240 V; 50/60 Hz



Power consumption (230 V / 100 V): Standby



<330 / <50 mW



Power consumption (230 V / 100 V): Idle



9 / 8 W



Power consumption (230 V / 100 V): Full output



180 W



In-rush current (Peak)



20 A



Standby



Disabled; 90 mins (default); user defined in software



Cabinet material



Composite polycarbonate



Cabinet surface finish; color (front / back)



Painted, White (RAL 9016)



Operating conditions



+10° C to +40° C (+50° F to +104° F); <75% RH; non-condensing



Transport/storage conditions



-25° C to +60° C (-13° F to 158° F); <90% RH; non-condensing



Woofer



100 mm (4") with protecting black metal grille



Tweeter



25 mm (1") with protecting black metal grille



Mounting points



2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm (5/8”)



Product dimensions (height x width x depth)



233 x 154 x 194 mm (9 1/8" x 6" x 7 5/8")



External net volume



6.7 liters



Product weight



3.5 kg (7 lbs 8 oz)




 


    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu