Sonifex RB-VHDA8 - 3G/HD/SD-SDI 1 Input, 8 Output Distribution Amplifier

52301

Neuf

3G/HD/SD-SDI 1 Input, 8 Output Distribution Amplifier
Prix constructeur :
979,73 CHF HT

Prix Visuals :

881,76 CHF


953,18 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 12 mois
Service interne : révision, réparation & backup.

Disponibilité : clock Délai habituel entre 2 et 4 semaines

- +

52301
En savoir plus  

The RB-VHDA8 is a high performance, reliable eight way digital video distribution amplifier for re-clocking and distributing a 3G, HD (high definition) or SD (standard definition) SDI source to eight outputs. The unit provides automatic input detection, re-clocking and cable equalisation of the input signal to 100/350 meters (HD/SD) of coax cable.


The full range of 3G, SD and HD standards are supported by the unit allowing PAL and NTSC signals up to 1080p 60Hz to be distributed. Each output is individually buffered providing separately driven outputs for greater reliability. As well as an AC power input, the unit also has a 12V DC input for use, for example, in outside broadcast vehicles.

Both power inputs can be used to give a dual redundant power supply; whichever voltage is higher will be used.


 


 



Technical Specification For RB-VHDA8



Standards



Compatible Standards:



SMPTE-424M (3G)
SMPTE-292M (HD-SDI)
SMPTE-259M-AC¹ (SD-SDI)
SMPTE 344M¹
DVB-ASI² at 270Mb/s



¹ Other rates will be passed without reclocking.
² Non inverted outputs only.



Impedance:



75Ω terminating



Equalisation:



Up to 100m of Belden 1694A at 1.485Gbps
Up to 350m of Belden 1694A at 270 Mbps



Data Rates:



Fully supported: 143, 270, 1483.5,1485, 2967 & 2970Mbps
Passed but not reclocked: 177, 360 & 540Mbps



Reclocking & Equalisation:



Automatic



Resolution:



Automatic



Return Loss:



>15dB at 1500MHz



Output Jitter:



<0.2UI



Signal Level:



800mV ±10%



 



 



Front Panel Indicators



Power LED:



Amber indicates power is present, Red indicates detection of valid incoming SDI signal



 



 



Rear Panel Connections



 



HD/SD-SDI Video Input:



1 x BNC (Unbalanced)



HD/SD-SDI Video Outputs:



8 x BNC (Unbalanced)



Power Supply:
AC:



Filtered IEC, continuously rated 85-264VAC, 47-63Hz, fused



Fuse Rating:



Anti-surge fuse 2A 20 x 5mm



DC:



12V 300mA max, DC supply, 2.5mm socket fused



 



 



Equipment Type



RB-VHDA8:



3G/HD/SD-SDI 1 Input, 8 Output Video Distribution Amplifier



 



 



Physical Specification



Dimensions (Raw):



48cm (W) x 10.8cm (D) x 4.3cm (H) 
19” (W) x 4.3” (D) x 1.7” (H) (1U)



Dimensions (Boxed):



58.5cm (W) x 22.5cm (D) x 7cm (H)
23” (W) x 8.9” (D) x 2.8” (H)



Weight:



Nett: 1.3kg  Gross: 1.9kg
Nett: 2.9lbs Gross: 4.2lbs


    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu