Sonifex RB-DA6P - 6 Way Stereo Distribution Amplifier

52254

Neuf

6 Way Stereo Distribution Amplifier With Phoenix Connectors (1U)
Prix constructeur :
689,93 CHF HT

Prix Visuals :

655,43 CHF


708,52 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 12 mois
Service interne : révision, réparation & backup.

Disponibilité : clock Délai habituel entre 2 et 4 semaines

- +

52254
En savoir plus  

The RB-DA6P is a version of the RB-DA6 audio distribution amplifier which uses Neutrik Phoenix style connectors instead of XLR inputs and outputs. Each unit is shipped with the mating connectors so that wires can be simply terminated using a small flat-blade screwdriver.

The inputs and outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one output won’t affect the others.

The left and right input gain controls (normalising) are pre-set potentiometers accessible through the front panel.

The output gain may be varied from -8dB to 18dB which is useful for normalising consumer and professional signals to give outputs of -15dBu and 0dBu respectively.


 


 



Technical Specification For RB-DA6P



Audio Specification



Maximum Input Level:



+28dBu



Maximum Output Level:



+28dBu



Frequency Response:



20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)



Gain Range:



Adjustable 8dB loss to 18dB gain (L & R adjust)



Common Mode Rejection:



>66dB typically



Input impedance:



>20kΩ bridging



Output impedance:



<50Ω



Distortion:



0.01% THD @ 1kHz, ref +8dBu output



Noise:



-100dB unity gain, ref +8dBu output



 



 



Connections



Inputs:



2 x Phoenix 3 pin (balanced, can be unbalanced)



Outputs:



12 x Phoenix 3 pin (balanced, can be unbalanced)



Mains Input:



Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max



Fuse Rating:



Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)



 



 



Equipment Type



RB-DA6P:



6 way stereo distribution amplifier with Phoenix connectors 



 



 



Physical Specification



Dimensions (Raw):



48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)



Dimensions (Boxed):



53cm (W) x 20.5cm (D) x 6cm (H)
21” (W) x 8” (D) x 2.4” (H)



Weight:



Nett: 1.3kg  Gross: 1.9kg
Nett: 2.9lbs Gross: 4.2lbs


    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu