Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
USB-C to 5-Pin DMX KIT
3 pièce (s) en stock
FreeStyle/4 Extension, 25ft
Délai de livraison de 4 à 6 semaines
5c Cable Guard
4c Cable Guard
The cable crossover is built to protect cables from moisture, oils, solvents, and frame as a shield for impact resistance and load bearing.
SPIDER male cable connector with crimping contacts. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67...
SPIDER male cable connector with solder pins. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67 necessary for...
SPIDER female cable connector with solder pins. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67 necessary...
SPIDER female cable connector with crimping contacts. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67...
Punch unit with round cutting die and an outer hole diameter of 23.8 mm for sheet steel with a thickness of max. 2 mm. Suitable for Neutrik powerCON connectors NAC3FPX(-ST). Tension bolt: 9.5 mm; insert hole: 12.7 mm.
Cable Connectors for cables with diameter from 15 - 23 mm
Female Cable Connectors for cables with diameter from 15 - 23 mm
SPIDER male cable connector without pins. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67 necessary for the...
Female Cable Connectors for cables with diameter from 19 - 28 mm
Female Cable Connectors for cables with diameter from 22 - 32 mm
Female Cable Connectors for cables with diameters from 15 - 23 mm
Female Cable Connectors for cables with diameters from 22 - 32 mm
Female Cable Connectors for cables with diameters from 19 - 28 mm
Male Cable Connectors for cables with diameter from 22 - 32 mm
Male Cable Connectors for cables with diameter from 19 - 28 mm
Male Cable Connectors for cables with diameter from 15 - 23 mm
Cable Connectors for cables with diameter from 19 - 28 mm
Innovative and ergonomic hand grips for easy handling (Drain line). With finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. No special tools are required for assembling
Line connector source with innovative ergonomic hand grips for easy handling and with finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. There are no special tools required for assembling.
Line connector source with innovative ergonomic hand grips for easy handling and with finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. There are no special tools required for assembling.
Line Source Phase 2 black / 50 mm2
Innovative and ergonomic hand grips for easy handling (Drain line). With finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. No special tools are required for assembling
Innovative and ergonomic hand grips for easy handling (Drain line). With finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. No special tools are required for assembling
Line Drain Phase 1 brown / 50 mm2
Linear Junction for E-TRACK Mains/DMX Black. Straight coupler
Délai habituel entre 2 et 3 mois
End feed right black for E-TRACK Mains/DMX Black
Délai habituel entre 2 et 3 mois
SPIDER female cable connector without pins. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67 necessary for...
The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish. The insert stack is neoprene rubber, thereby allowing removable contacts in solder...
The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish. The insert stack is neoprene rubber, thereby allowing removable contacts in solder...
Female panel mount connector with gold crimp contacts. The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish.
cPot coupler MM
Chroma RGBX LiteRibbon Adapter, LiteDimmer Pocket
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Cable Connectors for cables with diameter from 15 to 23 mm
Cable Connectors for cables with diameter from 22 to 32 mm
Cable Connectors for cables with diameter from 19 - 28 mm
Panel mount connector with gold-plated crimp contacts. The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish.
Female Cable Connectors for cables with diameters of 15 to 23 mm
Female Cable Connectors for cables with diameters of 19 to 28 mm
Female Cable Connectors for cables with diameters of 22 to 32 mm
X08-F125 Female Connector Assembly
Délai de livraison de 4 à 6 semaines
X08-F125 Male Connector Assembly
Délai de livraison de 4 à 6 semaines
X12-F425 Female Connector Assembly
Délai de livraison de 4 à 6 semaines
X12-F425 Male Connector Assembly
Délai de livraison de 4 à 6 semaines
Mez-tie 2cm X 20cm - White (50pcs Per Pack)
Mez-tie 2cm X 20cm - Yellow (50pcs Per Pack)
Ball Bungee Dia. 4.5mm/ Length 6''( Black) 50 Pcs/packp
Mez-tie 2cm X 20cm - Black (50pcs Per Pack)
Mez-tie 2cm X 20cm - Blue (50pcs Per Pack)
Mez-tie 2cm X 20cm - Red (50pcs Per Pack)
For Aputure MT Pro, INFINIBARs, and MC Pro lights.
TRS (Headphone) to RJ45, 2 ft.
TRS (Headphone) to XLR Female, 2 ft.
TRS (Headphone) to XLR Male, 2 ft.
Male panel mount connector without contacts. The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish.
powerCON 32 A cable connector
cPot cable connector F
5 pole termination impedance 120 Ohm. Is connected as termination with the last instrument in a DMX-circle, with purple sockets for better distinction to the normal XLR connectors.
cPot panel con M tb 2x35/1x25mm2
Female panel mount connector without contacts. The SYNTAX SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish.
powerCON NAC3MPA-1 (power in) - powerCON NAC3MPB-1 (power out), coupler for linking cables
Phoenix-7 Male Connector
3 pole termination impedance 120 Ohm. Is connected as termination with the last instrument in a DMX-circle. With purple sockets for better distinction to the normal XLR connectors.
Phoenix-6 Male Connector
XLR to RJ45 Adapter, Female 5-pin
XLR to RJ45 Adapter, Male 5-pin
Velcro Cable Ties 25mm X 300mm (Per 12)
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
cPot panel con M axial 10-25mm2
Pendant clip black for suspension by steel wire or pendant rod, incl. M13 x 1 nut material: aluminium anodized or powder coated for E-TRACK Mains/DMX Black
Délai habituel entre 2 et 3 mois
cPot cable connector M
cPot panel con M M6x20mm IP65
Phoenix-5 Male Connector
3-pole powerCON TRUE1 appliance outlet connector, power-out, with locking mechanism and 6.35 mm screw terminals. Please note: this version is larger than the D-series. IP65.
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Ez-tie Cable Grip 20mm X 410mm - Red (10pcs Per Pack)
Ez-tie Cable Grip 20mm X 410mm - Blue (10pcs Per Pack)
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance.
Phoenix-7 Female Connector
Phoenix-4 Male Connector
Phoenix-6 Female Connector
TOP appliance inlet-outlet combination with power-in and power-out in the same housing and with 6.35 mm flat tabs.
powerCON 32 A chassis connector, power-in
Phoenix-5 Female Connector
3-pole powerCON TRUE1 TOP female cable connector, power-out, with locking mechanism and screw terminals.
Sealing Self-Closing Cap PX
Mains Cable Con. Ooutlet CBC Top
3-pole powerCON TRUE1 TOP male cable connector, power-in, with locking mechanism and screw terminals.
Mains Cable Con. Inlet CBC Top
3-pole powerCON TRUE1 TOP appliance outlet connector, power-out, with locking mechanism and 6.35 mm flat tabs, but without insulation divider. IP65.
3-pin powerCON TRUE1 device installation socket, power-out, with locking and 6.35 mm tabs. Note: This version is larger than the D series.
Lockable cable connector, power-out, screw terminals, gray
Mains Line Connector
RJ45 Connector-Coupler, Black
Phoenix-3 Male Connector
Phoenix-4 Female Connector
VGA Gender Changer f/f, High Density, RoHS compliant
Phoenix Connector, Male 2-pin
Sealing Self-Closing Cap FPX
4 Pcs Per Pack (Szie : 40mm to 50mm)
Sealing Self-Closing Cap D
Phoenix Connector, Female 2-pin
Phoenix-3 Female Connector
End cup black for E-TRACK Mains/DMX Black
Délai habituel entre 2 et 3 mois
Ez Tie Petite, 7pcs Per Pack, Black
Ez Tie Petite, 7pcs Per Pack, White
3-pole powerCON TRUE1 TOP appliance inlet connector, power-in, with locking mechanism and 6.35 mm flat tabs, but without insulation divider.
3-pole powerCON TRUE1 TOP appliance inlet connector, power-in, with locking mechanism and 6.35 mm flat tabs. IP65.
The two disks are easily fitted to the central ring of six contacts, thereby creating a common ground ring.
Chassis connector, power-out, 3/16 inches flat tab terminals, gray, without insulation divider
Chassis connector, power-in, 3/16 inches flat tab terminals, blue, without insulation divider
Barrel Connector, Output
Barrel Connector, Input
Dust protection cover for most speakON and powerCON chassis connectors. It can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.
Molded hook-and-loop velcro tie with a detachable plastic clip which ensures the plug stays in and the usb port is protected from damage when doing the shooting.
cPot safety clip yellow
cPot safety clip red
The rubber sealing cover protects the powerCON TRUE1 male chassis connector NAC3MPX from dust and water according to protection class IP65
The rubber sealing cover protects the powerCON TRUE1 female chassis connector NAC3FPX* from dust and water according to protection class IP65.
Soft plastic cover for the rear ends of several D-size chassis connectors. It is used to protect the gap between connector and cable. The protection cover works with all common wires and cables you simply cut off the cover end to the preferred diameter.
Female gold-plated crimp contact for SSX connectors with 19 pins.
Female gold-plated solder contact for SSX connectors with 19 pins.
Male gold-plated crimp contact for SSX connectors 19 pins.
Male gold-plated solder contact for SSX connectors with 19 pins.
The dummyPLUG NDL for all 4 pole speakON and powerCON chassis enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
Blue, partly insulated cable socket made of brass with pure tin-plated surface, with a size 4.8 x 0.5 mm. Suitable for a cable diameter of 1.5 - 2.5 mm2.