Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Sony HDC-4800 to BP-18 adapter plate
Euromount scaffold clamp
Windbracing Plate VEO set of 5
Délai habituel entre 4 et 8 semaines
Aluminium Telescopic Pan bar plus attachment for Focus 8, Focus 8S, Focus HD, Focus 12.
Aluminium Short Pan bar plus attachment for Lambda 10 Nodal Head
Aluminium Short Pan bar plus attachment for Spinhead Fluid Heads, in all their versions.
Camera Plate - Long for Master 25 (w/two 3/8" screws)
DV quick release with 3/8" attachment w/ 1/4" & 3/8" attachment
Quick release Camera plate support (for AH943 plate) w/ 1/4" & 3/8" attachment
Mitchell wedge Lock adapter for Mitchell Lock for Vinten - O'Connor heads
Aluminium Short handle for Lambda 50 Nodal Head
Candy bar for Focus 8, Focus 10 and Focus 12 Fluid Heads (holes 1/4" and 3/8")
Candy bar for Focus 18, Focus 22 and Lambda 10 Fluid Heads (holes 1/4" and 3/8")
For all Camgear Elite-Serie Tripods & Tripod Systems
Délai habituel entre 2 et 8 semaines
Grip Kit Adapter including Rocker Plate
100mm Tiedown for 100mm Ball Base 08365
Includes one set (2 pcs) of 15 mm (0.59 in) clamps
Tube
Délai habituel entre 4 et 8 semaines
Baseplate including Euro mount
Sand bag
Délai habituel entre 4 et 8 semaines
Rosette extender with two 1/4" threads and two 3/8" threads, to be installed on the pan bar rosette fixing of a head.
This versatile accessory extends the width of the pan bar fixation and adds new fixing threads for accessories as extention arms, monitor holders, lights or any other accessory.
Set of 3, for flowtech tripods.
Tube assembly
Délai habituel entre 4 et 8 semaines
Tripod adapter for ENG tripods.
Délai habituel entre 2 et 8 semaines
100mm half ball with 3/8" screw with long locking handle
The Mitchell pillar extension is characterized by its low weight and high torsional rigidity.
For pedestals & flat base tripods
Adapter
Adapter
Magnetic spacer pieces for Euro to Mitchell
Counterweight for JibO (20 Kg)
Counterweight for Lambda 10 Nodal Head (1 rod and 1 weight)
Studio wheels Set 3 pcs
Dolly Pin to Junior Receiver
Recommended for fluid head Cine 7+7 HD
Délai habituel entre 4 et 8 semaines
Set of 3 Circular Anti-Skid Carpet Feet for Vision Tripods
mid-level spreader for tripods 75/2 AL and Ace 75/2
Délai habituel entre 4 et 8 semaines
75mm half ball with 3/8" screw with long locking handle
Manfrotto R684,14
Délai habituel entre 4 et 8 semaines
Dolly Pin to Junior Receiver Offset Arm
100mm half ball with 3/8" screw with short locking handle
175F-2 Head
Délai habituel entre 4 et 8 semaines
Arri Alexa Mini dovetail adapter plate for USBP MKII
Sand Bag, Empty Set of 2, Black-25-pounds
Délai habituel entre 8 à 10 semaines
Long Camera plate for Focus 8S, Focus HD, Lambda 10 & Spinhead Fluid Heads (with pin + 1/4" and 3/8" screws)
Cine style slide Camera plate for Master MK2, Maxima, Maxima 30, Master 30, Spinhead and Lambda 25 Fluid Heads (with two 3/8" screws)
Counterweight Lambda 10 Nodal Head telescopic handle (1 rod and 2 weights)
for all Camgear Tripod Systems
Délai habituel entre 2 et 8 semaines
Aluminium mid-level Spreader for ENG, EFP and DSLR/UHD Tripods (1 stage only)
Aluminium mid-level Spreader for ENG and EFP Minibaby Tripods
Bowl adapter 150mm
75mm half ball with 3/8" screw with short locking handle
Shot Bag-30lbs
The Pozi-Loc CarryingStrap provides a convenient way to carry Pozi-Loc Tripods [excluding Baby Legs] and Vision systems whilst filming.
Reduction ring 150mm to 100mm
Euro adapter on Vinten
Camera Mounting Plate, suitable for Vision 3AS & 5AS
For flowtech tripods
Column Assembly
Délai habituel entre 4 et 8 semaines
The Tripod Mount from Blackmagic Design provides easy forward-to-back adjustment for your Studio 4K, URSA Mini, or URSA Broadcast camera.
For T630/2- T631/2 - T729/2 - T728/2 - T723/2 - T622/B series tripods
Tie down knob for Master Mk2 - Master 30 - Maxima 30 - Master 40 - Maxima 40 - Maxima 5.0 - Master 65flat/Mitchell
Tie down knob for Magnum, Master 65 and Omega Fluid Heads on Mitchell flat base
Camera Plate for Third Axis Lambda 50 (w/two 3/8" screws )
Camera plate for Third Axis Lambda 25 (w/two 3/8" screws )
Camera plate for Lambda 50 Nodal Head (with two 3/8" screws)
Adaptor to mount an FSB Mk II head onto a C III pedestal
Délai habituel entre 4 et 8 semaines
Quick Release Camera Plate Support
Camera plate support (for Focus 8 plate)
Camera Mounting Plate, suitable for Vision 8AS & 10AS
The Vinten 33364-900SP Camera Mounting Plate is compatible with Vinten's Vision 100 and Vision 250 fluid heads. It features two 3/8"-16 threaded screws.
Second Pan Bar for Pro-6HDV and Pro-10.
Soft Case for Pro-6HDV and Pro-10 Systems. Weight 1.5Kg.
Kupo Shot Bags are made of 1000 denier black cordex textured Nylon with a water resistant polyurethane coating on the inside. 2mm steel ball are encapsulated in poly inner bag and sealed up with the bag which makes it dense weight and never leak. Two wings design allows to drape perfectly over light stand legs
for Vision blue range
Dual Cavs Vertically Polarized Antenna 5.8GHz & 2.4GHz Dual Channel Dual Gain (12 Pack)
The Mitchell pillar extension is characterized by its low weight and high torsional rigidity.
Long Rods (set of 3) L. 240mm
Promoting stable and steady handling, the Panasonic DMW-SHGR1 Tripod Grip is a unique and intuitive way to stabilize select Lumix digital cameras.
Délai habituel 6 semaines
PTZ Ball joint (w/1/4" + 3/8" pin) for PTZ supports
Handle w/ 100mm bowl
Camera plate for C20-S - Dutch heads - Maxima (w/two 3/8" screws)
Tie down knob for Master MK2, Master 30 and Maxima 30 Fluid Heads on 150 mm bowl diameter
Tie down knob C20S for 150 mm bowl diameter Fluid Head
Mount Plate for HLM-905WR
Délai habituel entre 2 et 4 semaines
for mounting additional accessories on FSB 6/8
Délai habituel entre 4 et 8 semaines
Lightweight floor spreader for RT20C
Délai habituel entre 2 et 3 semaines
for Sachtler 100 mm tripods (except HotPod)
Délai habituel entre 4 et 8 semaines
Base plate High for low camera (EOS 5 model).
Vocas Separate Pro Support Type L Base Plate.
Arm - Normal track width
Extra Long Plate for TH-X, TH-Z, NH10, and NH30
Délai habituel entre 2 et 3 semaines
Kit of Shaft for Gas Spring
Délai habituel entre 4 et 8 semaines
MOVE is the first quick change system that helps you increase your pace on set and make changing setups effortless.
Délai habituel entre 4 et 8 semaines
SmallRig Manfrotto Drop-in Baseplate 2887B is designed for quick installation of Manfrotto quick release plate.
Délai habituel entre 4 et 5 semaines
77lb(35kg) Sand Bag
Floor spreader for RT30B, RT40RB, RT50B and RT50C
Délai habituel entre 2 et 3 semaines
Extra Long Plate for LX10 Head, RHP75 and RHP85
Délai habituel entre 2 et 3 semaines
for DV6P, V10, V12, V15P, V20P, V25P & V35P Tripod Systems)
Délai habituel entre 2 et 8 semaines
Mid Level Spreader MSP-MINI for all MARK-Serie & 3S-Fix Mini Tripods & Tripod Systems
Délai habituel entre 2 et 8 semaines
Bowl adapter 75/100mm
connector for aktiv 75 mm heads onto Sachtler 75 mm tripods (except Soom)
Délai habituel entre 4 et 8 semaines
Switchbox for RB 5004 HF
Dolly Pin to Baby Adapter
Adapter for fluid heads DV 8/100, DV 10, DV 12 and Video 15 on Pedestal C I
Délai habituel entre 4 et 8 semaines
40 lb. Sand Bag, Black
Délai habituel entre 8 à 10 semaines
75mm to 100mmBowl Adaptor
Hand pump - 6 bar for Airfloater
The Mitchell pillar extension is characterized by its low weight and high torsional rigidity.
Ground Spreader GS-MINI compatible with MARK & 3S-FIX MINI Tripods
Délai habituel entre 2 et 8 semaines
required with Mid Level Spreader MSP-2
Délai habituel entre 2 et 8 semaines
Camgear Elite Wedge Plate TNG-35 for Elite 25 Fluid Heads / Tripod Systems
Délai habituel entre 2 et 8 semaines
Pan Bar PB-1 for DV6P, V10, V12 & V15P Tripod Systems
Délai habituel entre 2 et 8 semaines
for V20P & V25P Fluid Heads
Délai habituel entre 2 et 8 semaines
for V35P Tripod Systems
Délai habituel entre 2 et 8 semaines
for MARK Lite, MARK 4 & MARK 6 Tripod Systems
Délai habituel entre 2 et 8 semaines
Camera plate for Focus 8 Fluid Head (with pin + 1/4" screw)
Camera plate for Focus 8S, Focus HD and e-Focus Fluid Heads (with pin + 1/4" screw)
Tie down knob for Focus 8 & Focus 8S Fluid Heads and Lambda 10 Nodal Head
Tie down knob for Focus 12, Focus 18, Focus 22, Focus HD, Lambda 10 and C20S Fluid Heads
Vocas Separate Pro Support Type K Base Plate.
HG-100TBR tripod grip
Délai habituel 2 semaines
Adaptor
Délai habituel entre 4 et 8 semaines
Pack for 5002BL Set of 10
Délai habituel entre 4 et 8 semaines
Arm - Connecting piece
Recommended for DV 8 and DV 8/100
Délai habituel entre 4 et 8 semaines
Bowl adapter 100mm
Adaptor to mount an aktiv 100 mm fluid head to slider with 3/8" connection; with SpeedSwap system
Délai habituel entre 4 et 8 semaines
Large rubber feet for T102B, T103B, T103C, T150B, and T150C
Délai habituel entre 2 et 3 semaines
Look back kit for tripod mount. Ideal for monitors to be mounted directly under a camera. (VESA mount for 24"-32" monitors) To be used in conjunction with virtual studio or other live applications
Délai habituel entre 3 et 4 semaines
The 492 Micro Ball Head from Manfrotto is a 2.6" tall, aluminum support with a load capacity of 11 lb. The head has a single ergonomic locking knob that controls the ball and pan movements at the same time. The 4.9 oz head has a cut notch on the side that allows you to position the camera at a 90° angle, and the camera attaches to head via its 1/4"-20...
Délai habituel entre 4 et 8 semaines
Adapter for fluid heads DV 12 SB and Video 15 SB
Délai habituel entre 4 et 8 semaines
Snap Stand Bag(Big) L:110cm Allows to 3 Snap Stands
for V12, V15P & V20S Fluid Heads
Délai habituel entre 2 et 8 semaines
Camgear Elite Wedge Plate TNG-16 for Elite 10, Elite 12, Elite 15, Elite 18 & Elite 20 Fluid Heads / Tripod Systems
Délai habituel entre 2 et 8 semaines
For all Camgear EFP and 3S-FIX EFP tripods and other tripods with 24mm diameter tube.
Délai habituel entre 2 et 8 semaines
For all Camgear ENG and 3S-FIX ENG tripods and other tripods with 19mm diameter tube
Délai habituel entre 2 et 8 semaines
Disk w/wholes
Délai habituel entre 4 et 8 semaines
Hand pump - 10 bar for all CARTONI Pedestals
Arm - End piece
Arm - Small track width
Adapter for fluid heads Video 18/20 SB, Video 18 Plus since 05/2005 and Video 20 Plus since 2002
Délai habituel entre 4 et 8 semaines
LONG Locking Handle for Half Balls 75/100mm 3/8"-24UNF
The 500BALLSH comes with a short clamping lever and allows all Manfrotto flat base heads to be attached to any tripod with a 100 mm half-shell, including the 529B hi-hat. Length 12.5cm..
Empty Saddle Sandbag-medium (24 Lbs)
Bowl adapter 75mm
Sand bag (25lb) to stabilaze valuable equipment. Does not inclued sand.
Délai habituel entre 8 à 10 semaines
25 lb. Sand Bag, Black
Délai habituel entre 8 à 10 semaines
Tripod Adapter Plate for LWS 401-C300MKIIA with 3/8" and 1/4" threads
Accessory adapter for fluid heads with adapter viewfinder extension
Délai habituel entre 4 et 8 semaines
Click Stand Bag(Small) L:90cm Allows to 4 Click Stands
required with Mid Level Spreader MSP-2
Délai habituel entre 2 et 8 semaines
for V10 & V10P Fluid Heads
Délai habituel entre 2 et 8 semaines
for DV6P Fluid Heads
Délai habituel entre 2 et 8 semaines
Camgear Elite Wedge Plate TNG-DV for Elite 8 Fluid Heads / Tripod Systems
Délai habituel entre 2 et 8 semaines
Base
Délai habituel entre 4 et 8 semaines
LONG Locking Handle for Half Balls 150mm M10
LONG Locking Handle for Half Balls 75/100mm 3/8"
LONG Locking Handle for Half Balls 150mm 3/8"
LONG Locking Handle for Half Balls 75/100mm M10
The AIR Spreader from Steadicam is a three-leg base for Steadicam AIR monopods.
Screw M10X50 Set of 50
Délai habituel entre 4 et 8 semaines
Shot Bag-15 Lbs
Sand bag (15lb) to stabilaze valuable equipment. Does not inclued sand.
Délai habituel entre 8 à 10 semaines
15 lb. Sand Bag, Black
Délai habituel entre 8 à 10 semaines
Stirrup Set of 10
Délai habituel entre 4 et 8 semaines
Plastic mid-level Spreader for DSLR/UHD Tripods (1 and 2 stages)
This snap ON/OFF quick release plate enables smooth attachment/release while holding a camera
Délai habituel entre 2 et 3 semaines
2 pc monopod set for enhanced slider support
Délai habituel entre 2 et 3 semaines
Adaptor to mount aktiv 75 mm fluid heads with SpeedSwap base on a slider with 3/8" mounting stud or any other product with 3/8" attachment
Délai habituel entre 4 et 8 semaines
Extendable pan handle for LX10 Head, RHP75 and RHP85 for Left Hand
Délai habituel entre 2 et 3 semaines
This dual suction mount allows you to securely mount an action camera or smartphone onto a car, boat, snowboard, any type of window, and generally any flat, nonporous surface, to capture scenes while in motion.
Délai habituel entre 4 et 5 semaines
Handle for ENG tripods
for Ace Mk II systems and FSB systems with tripod 75/2 Mk II
Délai habituel entre 4 et 8 semaines
SHORT Locking Handle for Half Balls 75/100mm 3/8"
SHORT Locking Handle for Half Balls 75/100mm M10
SHORT Locking Handle for Half Balls 150mm 3/8"
SHORT Locking Handle for Half Balls 150mm M10
SHORT Locking Handle for Half Balls 75/100mm 3/8"-24UNF
Label Set of 48 pcs
Délai habituel entre 4 et 8 semaines
Shot Bag-10lbs ( Wrap & Go)
for DV6P, V10, V10P, V12, V15P, V20S, V20P and V25P Tripod Systems
Délai habituel entre 2 et 8 semaines
For MARK 2 and 3S-FIX Mini tripods.
Délai habituel entre 2 et 8 semaines
Rubber Feet RF-MINI (set of 3) required with MARK & 3S-FIX MINI tripods when using the Mid Level Spreader MSP-MINI
Délai habituel entre 2 et 8 semaines
Clamp shell FT 75
75mm Tiedown
Délai habituel entre 4 et 8 semaines
Tripod mount adapter with bowl clamp
Délai habituel entre 2 et 3 semaines
Shoulder strap for ENG tripods
Shoulder strap for DV tripods
Attach your camera or monitor to tables, counters, car windows, pipes, and other objects with this durable Spring Clamp from Marshall Electronics.
Délai habituel 2 semaines
Sphere Set of 100
Délai habituel entre 4 et 8 semaines
Wedge plate ENG, incl. 1/4 and 3/8 screw. 1 pc.
Tiltall leveling half-shell BG-100
All Labels B150-1
Délai habituel entre 4 et 8 semaines
All Labels B150P-1
Délai habituel entre 4 et 8 semaines
All Labels B7043CS-1
Délai habituel entre 4 et 8 semaines
All Labels B7047CS-1
Délai habituel entre 4 et 8 semaines
1 Section Go Alu Laser Warmer
Délai habituel entre 4 et 8 semaines
The Manfrotto 504PLONG Quick-Release Mounting Plate is the long version of the standard camera plate for the Manfrotto 504HD fluid head. The extra length helps balance cameras with unusual weight distribution. the plate includes two 1/4"-20 and two 3/8"-16 camera tie-down screws.
Délai habituel entre 4 et 8 semaines
Steel Pipe 35X387MMBLCK W/SPIG
Délai habituel entre 4 et 8 semaines
Drop-In HawkLock Quick Release Monitor Mount with NATO Clamp
Délai habituel entre 4 et 5 semaines
Sand Bag (Max. Load: 50lbs / 22kg)
Tie-down for flowtech 100
Délai habituel entre 4 et 8 semaines
Column D13 Assembly
Délai habituel entre 4 et 8 semaines
Wedge plate DV, incl. 1/4 screw. 1pc.
Insert Central Column Set of 3
Délai habituel entre 4 et 8 semaines
Shot Bag-05 Lbs ( Wrap & Go)
Jaw 1-1/8 Bushing w/m12 Screw
Délai habituel entre 4 et 8 semaines
1 Section Go Alu Laser
Délai habituel entre 4 et 8 semaines
Bushing set of 5
Délai habituel entre 4 et 8 semaines
for Ace Mk II systems and FSB systems with tripod 75/2 Mk II
Délai habituel entre 4 et 8 semaines
Tiltall leveling half-shell BG-75
for all 75mm & 100mm Heads, except MARK Series
Délai habituel entre 2 et 8 semaines
Bowl Clamp BC-MINI for MARK 2, MARK 4, MARK 6 & Elite 8 Fluid Heads
Délai habituel entre 2 et 8 semaines
Lightweight rubber feet for RT20C
Délai habituel entre 2 et 3 semaines
Weight attachment plate for Sony NEX-EA50.
Clamping screw 75 mm
Délai habituel entre 4 et 8 semaines
Plate
Délai habituel entre 4 et 8 semaines
Drop-In Hawklock Mini Quick Release Monitor Mount with Cold Shoe
Délai habituel entre 4 et 5 semaines
1 Section Go Alu
Délai habituel entre 4 et 8 semaines
Corner for Rostrum
The Laowa Tripod Collar for 100mm f/2.8 2x Ultra Macro APO from Venus Optics is designed for this lens, and it gives you the option of mounting the lens to a tripod, which provides a steadier shot.
The Laowa Tripod Collar for 100mm f/2.8 2x Ultra Macro APO from Venus Optics is designed for this lens, and it gives you the option of mounting the lens to a tripod, which provides a steadier shot.
Middle casting
Délai habituel entre 4 et 8 semaines
Spider+Column
Délai habituel entre 4 et 8 semaines
Pack for 111BSU-VEO1
Délai habituel entre 4 et 8 semaines
Pack for 111BSU
Délai habituel entre 4 et 8 semaines
Drawsting Carrying Bag for KCP-621B
Assembly Leather Packing Set Of 5
Délai habituel entre 4 et 8 semaines
Carrying Strap flowtech for Tripods flowtech
Délai habituel entre 4 et 8 semaines
Adapter of Vinten 100mm heads for 100mm ball diameter tripods
Délai habituel entre 2 et 3 semaines
Tripod case for TH-X and TH-Z
Délai habituel entre 2 et 3 semaines
Use any third-party tripod head on your Travel Tripod with the Universal Head Adapter from Peak Design. Simply remove the compact ball head and replace it with a tripod head of your choice and install it with the included 4mm hex wrench. The head threads onto the adapter's 3/8"-16 threaded mount, and it secures by tightening the three set screws into the...
The stainless steel Spike Feet Set from Peak Design is a replacement set that is compatible with Peak Design's carbon fiber and aluminum travel tripods. The spike feet help to stabilize your tripod on slippery ice, loose dirt, or gravel, keeping it from moving on these surfaces. A hex wrench is included to install the feet and a microfiber pouch to store...
Convert your Travel Tripod into an ultralight tripod with the Ultralight Conversion Kit from Peak Design. The TPU rubber feet install and uninstall easily without the use of any tools. Swapping out the lower leg sections with the lighter feet reduces the weight of the carbon fiber Travel Tripod by 40% and the aluminum version by 45%.
Sand Bag (Max. Load:35lbs / 16kg)
For indirect flashing. With ball-and-socket joint for stepless movement in all directions. Accessory shoe detachable. 1/4 mounting thread with lock nut. Reflector umbrella holder 9.2 mm diameter. For fastening to accessory shoe or stands. Stand thread 1/4 with removed slot-on foot 3/8. Accessory foot with fixing screw
Steel Black Pipe 30x538mm
Délai habituel entre 4 et 8 semaines
Tripod mounting plate for Victorem 4KSDI-Mini models when used with VICLENSMOUNT-A; incl.(2) M4 8mm panhead mounting screws
Tripod mounting plate for Victorem CXP and 2KSDI-Mini models when used with VICLENSMOUNT-A; incl. (4) M3 8mm panhead screws
Short clamping lever for attaching any Manfrotto video ball head to the 529B hi-hat.
Délai habituel entre 4 et 8 semaines
Ball Head
Délai habituel entre 4 et 8 semaines
Top Spider Assembly
Délai habituel entre 4 et 8 semaines
Ball head 2fix
Quick release plate for K5535
The Sidekick Pocket Smartphone Adapter from Benro is a foldable smartphone adapter designed to make producing content with a phone even easier. With a one-size-fits-all design, the Sidekick Pocket fits phones from 2.4-3.7" wide and folds to pocket size for portability. The spring-loaded phone mount rotates 90° for vertical or horizontal composition.
Empty Saddle Sandbag-small
1/4"-20 to 5/8"-11 Threaded Screw Adapter for Tripod
3/8"-16 to 5/8"-11 Threaded Screw Adapter for Tripod
Set of Locking Wedges for LS.5
Délai habituel entre 4 et 8 semaines
Upgrade Kit For Dolly Eng To Dolly Flowtech
All Labels 387XBU
Délai habituel entre 4 et 8 semaines
All Labels 387XU
Délai habituel entre 4 et 8 semaines
Autopole Locking Handle with H.W.
Délai habituel entre 4 et 8 semaines
Connector
Délai habituel entre 4 et 8 semaines
Knob & Screw for Collar 60-70
Délai habituel entre 4 et 8 semaines
Brake and Collar Set 5+5 Pcs
Délai habituel entre 4 et 8 semaines
Assembly Column Black + CDL 1/4"
Délai habituel entre 4 et 8 semaines
Lock-Off Knob Set of 5 Pcs
Délai habituel entre 4 et 8 semaines
Feet Set of 10 Pcs
Délai habituel entre 4 et 8 semaines
Brake Shoe x Spider Set 10 Pcs
Délai habituel entre 4 et 8 semaines
Brake Shoe for Collar Set Of 5+5
Délai habituel entre 4 et 8 semaines
Extension Bar
Délai habituel entre 4 et 8 semaines
Top Part of Autopole Collar
Délai habituel entre 4 et 8 semaines
Spilt Pin for Truss Clamp Set 5
Délai habituel entre 4 et 8 semaines
Disk
Délai habituel entre 4 et 8 semaines
All Tube 25x1,5x845
Délai habituel entre 4 et 8 semaines
Top Spider with Knob X Pipe Diameter 35
Délai habituel entre 4 et 8 semaines
Steel Pipe 35x525mm
Délai habituel entre 4 et 8 semaines
Support Casting Wheel D100 Black
Délai habituel entre 4 et 8 semaines
Top Casting with Knob & Rivet
Délai habituel entre 4 et 8 semaines
Helical Gear with Wedge
Délai habituel entre 4 et 8 semaines
Assembly Leg
Délai habituel entre 4 et 8 semaines
All Pipe 35x1x900
Délai habituel entre 4 et 8 semaines
Clip for Still Life Table 4pcs
Délai habituel entre 4 et 8 semaines
Bottom Section and Casting
Délai habituel entre 4 et 8 semaines
Lever for Shell Set 5 Pc
Délai habituel entre 4 et 8 semaines
Half Joints + Spring & Pin
Délai habituel entre 4 et 8 semaines
"T" Bolts Set
Délai habituel entre 4 et 8 semaines
Leg Suport for Mini Pole Base, Black
Délai habituel entre 4 et 8 semaines
Base Column with Spider & Rivets
Délai habituel entre 4 et 8 semaines
Base Column with Casting & Rivets
Délai habituel entre 4 et 8 semaines
Flash Shoe
Délai habituel entre 4 et 8 semaines
Dolly Pin Adapter (50mm)
Dolly Pin Adapter (35mm)
Dolly Pin to Junior Adapter
Boom Socket with Spigot & Knob
Délai habituel entre 4 et 8 semaines
Assembly Knob + Rope
Délai habituel entre 4 et 8 semaines
All Tube 35x1,5x604
Délai habituel entre 4 et 8 semaines
Assembly Column All 25mm Black + Molla
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Brake Shoe X Spider Set 10 Pcs
Délai habituel entre 4 et 8 semaines
Top Bend Leg Short Black
Délai habituel entre 4 et 8 semaines
Top Bend Leg Black
Délai habituel entre 4 et 8 semaines
Top Bend Leg
Délai habituel entre 4 et 8 semaines
Control Box Holder
Délai habituel entre 4 et 8 semaines
Middle Bend Leg
Délai habituel entre 4 et 8 semaines
Assembly T-Clamp Black
Délai habituel entre 4 et 8 semaines
Top Casting with Knob & Rivets
Délai habituel entre 4 et 8 semaines
Top Spider with Knob & Rivets
Délai habituel entre 4 et 8 semaines
Aluminium Tube D=25
Délai habituel entre 4 et 8 semaines
Steel Cable
Délai habituel entre 4 et 8 semaines
Tube Locker
Délai habituel entre 4 et 8 semaines
Yoke
Délai habituel entre 4 et 8 semaines
Top Casting with Knob & Rivets
Délai habituel entre 4 et 8 semaines
Bracket with Cork & Adapter (Japan)
Délai habituel entre 4 et 8 semaines
Assembly Middle Casting with Ring
Délai habituel entre 4 et 8 semaines
35mm Diameter Black Column + Cap
Délai habituel entre 4 et 8 semaines
Tilting Shoe Adapter
Right Lock Joint Half Shell
Délai habituel entre 4 et 8 semaines
Rivet Set of 100
Délai habituel entre 4 et 8 semaines
Aluminium Tube
Délai habituel entre 4 et 8 semaines
Knob for Lower Spider
Délai habituel entre 4 et 8 semaines
Knob M6 Female Set 5 Pcs
Délai habituel entre 4 et 8 semaines
Safety Cable with Pin for Telescop.
Délai habituel entre 4 et 8 semaines
All 35x1,5x525 Black
Délai habituel entre 4 et 8 semaines
Lever for Bushing Set 5 Pcs
Délai habituel entre 4 et 8 semaines
Short Crank Handle
Délai habituel entre 4 et 8 semaines
Bottom Bend Leg
Délai habituel entre 4 et 8 semaines
Pivot and Spring
Délai habituel entre 4 et 8 semaines
Half Joints + Grub Screws + Spring
Délai habituel entre 4 et 8 semaines
Assembly Upper Main Casting
Délai habituel entre 4 et 8 semaines
Aluminium Tube 25x1,5x1010 Black
Délai habituel entre 4 et 8 semaines
Bottom Grip + Rubber Pads
Délai habituel entre 4 et 8 semaines
Shim Assembly
Délai habituel entre 4 et 8 semaines
Lower Column with Spider & Rivets
Délai habituel entre 4 et 8 semaines
Aluminium Tube Black
Délai habituel entre 4 et 8 semaines
Set of "T" Bars
Délai habituel entre 4 et 8 semaines
"T" Handle Set
Délai habituel entre 4 et 8 semaines
Attachment with T-Bar and Pin
Délai habituel entre 4 et 8 semaines
Safety Label Kit of 4
Délai habituel entre 4 et 8 semaines
Pack for MS0490C
Délai habituel entre 4 et 8 semaines
Half Shell
Délai habituel entre 4 et 8 semaines
Jaw
Délai habituel entre 4 et 8 semaines
Rivet Set of 100
Délai habituel entre 4 et 8 semaines
Aluminium Tube
Délai habituel entre 4 et 8 semaines
Green Fixed Jaw For Super Clamp
Délai habituel entre 4 et 8 semaines
End Cap for Telescopic Hanger
Délai habituel entre 4 et 8 semaines
Assembly Cables Joint Plate
Délai habituel entre 4 et 8 semaines
Steel Pipe 30x424mm
Délai habituel entre 4 et 8 semaines
Middle Bend Leg Short Black
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25x1x930
Délai habituel entre 4 et 8 semaines
Knob for Lower Spider
Délai habituel entre 4 et 8 semaines
Adapter for Libec 75mm heads
Délai habituel entre 2 et 3 semaines
Lashing strap attachment
Support Casting x Wheel Dm 100
Délai habituel entre 4 et 8 semaines
Safety Device for Round Holes
Délai habituel entre 4 et 8 semaines
All Tube 30x1,5x604
Délai habituel entre 4 et 8 semaines
All Tube 30x1,5x308
Délai habituel entre 4 et 8 semaines
All Tube 35x1,5x280
Délai habituel entre 4 et 8 semaines
Pin & Cable for Foamcore / Styrene
Délai habituel entre 4 et 8 semaines
Mobile Jaw
Délai habituel entre 4 et 8 semaines
Feet for Super Hi Hi Roler 10pcs
Délai habituel entre 4 et 8 semaines
Assembly Piastra Per Funi
Délai habituel entre 4 et 8 semaines
Long Crank Handle
Délai habituel entre 4 et 8 semaines
Knob for S/Clamp 5 Pcs
Délai habituel entre 4 et 8 semaines
Spigot
Délai habituel entre 4 et 8 semaines
Top Spider, Complete
Délai habituel entre 4 et 8 semaines
Top Spider with Knob & Rivets
Délai habituel entre 4 et 8 semaines
Aluminium Tube 35x1x792
Délai habituel entre 4 et 8 semaines
Assembly Bushing + Leva + Grani
Délai habituel entre 4 et 8 semaines
Screw Set of 100
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 22x1x630
Délai habituel entre 4 et 8 semaines
Built as a replacement phone mount for their carbon and aluminum Travel Tripod models, the Travel Tripod Phone Mount from Peak Design is a universal phone mount that fits phones up to 3.54" wide, including the iPhone 11 Pro Max. When not in use, this mount hides away in the Travel Tripod's center column for easy accessibility.
Bottom Bend Leg Short Black
Délai habituel entre 4 et 8 semaines
Ring Nut
Délai habituel entre 4 et 8 semaines
Fixed Jaw For Super Clamp
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Lock-Off Knob Set of 5 Pcs
Délai habituel entre 4 et 8 semaines
Assembly Jaws
Délai habituel entre 4 et 8 semaines
Assembly Knob + Nut + Washer
Délai habituel entre 4 et 8 semaines
Knob Kit for Sliding Leg Black
Délai habituel entre 4 et 8 semaines
Bottom Bend Leg Black
Délai habituel entre 4 et 8 semaines
Brake Collar Set 5 + 5pcs
Délai habituel entre 4 et 8 semaines
Leg Fastener
Délai habituel entre 4 et 8 semaines
Bottom Column & Casting, Black
Délai habituel entre 4 et 8 semaines
Aluminium Tube Black
Délai habituel entre 4 et 8 semaines
Aluminium Tube 35x1x677
Délai habituel entre 4 et 8 semaines
Small Knob for Pell. Grip Set 5
Délai habituel entre 4 et 8 semaines
Flash Support Arm
Délai habituel entre 4 et 8 semaines
Lock Off Knob / Spigot x 5 Pcs
Délai habituel entre 4 et 8 semaines
All Tube
Délai habituel entre 4 et 8 semaines
Safety Cable
Délai habituel entre 4 et 8 semaines
Arm for Articulated Arm
Délai habituel entre 4 et 8 semaines
Pivot + Grub Screws
Délai habituel entre 4 et 8 semaines
Assembly Gamb + Ast + Riv Black "156ELSTB"
Délai habituel entre 4 et 8 semaines
Pack for D200 Set of 5
Délai habituel entre 4 et 8 semaines
Alluminium Pipe 30x1,5x337
Délai habituel entre 4 et 8 semaines
Steel Pipe 30x424mm
Délai habituel entre 4 et 8 semaines
Pack for D200LST2B Set of 5
Délai habituel entre 4 et 8 semaines
Pack for D210JB Set of 5
Délai habituel entre 4 et 8 semaines
100mm Bowl Adapter
Délai habituel entre 4 et 8 semaines
Top Bend Leg Short
Délai habituel entre 4 et 8 semaines
Knob Kit for Sliding Leg
Délai habituel entre 4 et 8 semaines
Bottom Pole with 1/4" with Stud
Délai habituel entre 4 et 8 semaines
Bottom Column & Casting
Délai habituel entre 4 et 8 semaines
Top Half Clamp Complete with Knob
Délai habituel entre 4 et 8 semaines
22mm Tube with Gasket, Black
Délai habituel entre 4 et 8 semaines
Friction Shoe
Délai habituel entre 4 et 8 semaines
Locking Ring
Délai habituel entre 4 et 8 semaines
Clamp & Lock Handle + Screw + Washer
Délai habituel entre 4 et 8 semaines
Bottom Spider
Délai habituel entre 4 et 8 semaines
Aluminium Tube 35,4x1,2x1030
Délai habituel entre 4 et 8 semaines
TOP HALF SPRING with KNOB & PAD
Délai habituel entre 4 et 8 semaines
80mm Wheel + M10 Nut Assembly
Délai habituel entre 4 et 8 semaines
M10 Ratchet Handle Assembly + Washer
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25x1x630
Délai habituel entre 4 et 8 semaines
Bottom Column, Black, with Rivets
Délai habituel entre 4 et 8 semaines
22mm Tube with Gasket for Aircushioned
Délai habituel entre 4 et 8 semaines
Weight Kg. 1,25 for P90 pedestal
Pin for Bushing
Délai habituel entre 4 et 8 semaines
Pack for 432-3 7B
Délai habituel entre 4 et 8 semaines
Portalamp. Ceram. Gx6,35 - Art.881
Délai habituel entre 4 et 8 semaines
Assembly Knob
Délai habituel entre 4 et 8 semaines
Joint
Délai habituel entre 4 et 8 semaines
Assembly Column 30 + Boccola
Délai habituel entre 4 et 8 semaines
Steel Black Pipe 30x538mm
Délai habituel entre 4 et 8 semaines
Pin for Crank Handle
Délai habituel entre 4 et 8 semaines
Leg & Brace, Black
Délai habituel entre 4 et 8 semaines
Bottom Spider
Délai habituel entre 4 et 8 semaines
Bottom Spider
Délai habituel entre 4 et 8 semaines
Aluminium Tube Black
Délai habituel entre 4 et 8 semaines
Leveling Leg Support, Complete
Délai habituel entre 4 et 8 semaines
Base Column with Yellow Casting
Délai habituel entre 4 et 8 semaines
Base Column with Casting, Black
Délai habituel entre 4 et 8 semaines
Short center column for GlobeTrotter, D=28.5 mm
28mm Pin + M12 Bolt
Délai habituel entre 4 et 8 semaines
Pack for D100 Set of 4
Délai habituel entre 4 et 8 semaines
Steel Pipe 30x424mm Black
Délai habituel entre 4 et 8 semaines
All Tube 25x1,5x604
Délai habituel entre 4 et 8 semaines
Top Spider with Knob X Pipe, Diameter 35
Délai habituel entre 4 et 8 semaines
Bottom Spider with Knob & Rivets
Délai habituel entre 4 et 8 semaines
Assembly Screw + Bush Set of 5 Pcs
Délai habituel entre 4 et 8 semaines
Knob with Threaded Bushing
Délai habituel entre 4 et 8 semaines
Middle Bend Leg Short
Délai habituel entre 4 et 8 semaines
Brake Shoe for Collar Set 5 Pcs
Délai habituel entre 4 et 8 semaines
Knob for S/Clamp Grav 5 Pcs
Délai habituel entre 4 et 8 semaines
Bottom Spider with Knob & Rivets
Délai habituel entre 4 et 8 semaines
The Four-Point Vibration Absorbing Bracket is designed to support Marshall Electronics micro broadcast cameras, such as the CV503 or CV506. It features 1/4"-20 pass-through holes on the top and bottom, allowing you to mount the camera on top while attaching the bracket to various supports.
Délai habituel 2 semaines
Maintain your Travel Tripod with the Peak Design Tool Kit, which includes a stainless steel hex wrench that has 2.5 and 4mm sizes. The wrench helps to remove the center column, so the tripod can drop to a lower shooting position, it removes ball head pins, it installs a universal head adapter and a spike foot set, and it retightens the leg cam levers on...
Travel Tripod Center Column - Aluminum
Tripod Adapter Base
Délai habituel 2 semaines
Aluminium Tube Black
Délai habituel entre 4 et 8 semaines
Leg Brace Set 2 Pcs
Délai habituel entre 4 et 8 semaines
Assembly Swivel Bottom Body
Délai habituel entre 4 et 8 semaines
Assembly Collar
Délai habituel entre 4 et 8 semaines
Wheel Adapter
Délai habituel entre 4 et 8 semaines
All 30x1,5x538 Black
Délai habituel entre 4 et 8 semaines
Aluminium Tube Black
Délai habituel entre 4 et 8 semaines
Assembly Nut Set of 100
Délai habituel entre 4 et 8 semaines
Top Spider For Pipe, Diameter 25
Délai habituel entre 4 et 8 semaines
Brake Shoe x Crankcase Ste 5pc
Délai habituel entre 4 et 8 semaines
Assembly Knob
Délai habituel entre 4 et 8 semaines
Leg & Brace
Délai habituel entre 4 et 8 semaines
Assembly Spider
Délai habituel entre 4 et 8 semaines
Black Steel Pipe 35x525mm
Délai habituel entre 4 et 8 semaines
Lid
Délai habituel entre 4 et 8 semaines
Bottom Bend Leg Short
Délai habituel entre 4 et 8 semaines
Bottom Section with Casting Black
Délai habituel entre 4 et 8 semaines
Steel Leg With Caps
Délai habituel entre 4 et 8 semaines
Aluminium Tube 22x1x816
Délai habituel entre 4 et 8 semaines
Handle Grip
Délai habituel entre 4 et 8 semaines
The Manfrotto 196AC Universal Clamp can be used to grip any round tube. and has a clamping range going from 2mm to 16mm (5/8"). Ideal for use with the Magic Arm and Articulated Arm product lines
Délai habituel entre 4 et 8 semaines
Top Spider, Polished
Délai habituel entre 4 et 8 semaines
Front Tube for Light Boom with Stud
Délai habituel entre 4 et 8 semaines
Pivot Shaft
Délai habituel entre 4 et 8 semaines
Fixed Jaw For Super Clamp
Délai habituel entre 4 et 8 semaines
Bottom Pole with Stud
Délai habituel entre 4 et 8 semaines
Aluminium Tube 35x1x789
Délai habituel entre 4 et 8 semaines
Handle + Bolt Assembly
Délai habituel entre 4 et 8 semaines
Aluminium Tube Black
Délai habituel entre 4 et 8 semaines
Screw 1/2" Set of 5 Pcs
Délai habituel entre 4 et 8 semaines
Bolt & Nut Set
Délai habituel entre 4 et 8 semaines
Aluminium Tube Black
Délai habituel entre 4 et 8 semaines
Middle Column, Aircushioned
Délai habituel entre 4 et 8 semaines
Top Casting with Pin & Rivets
Délai habituel entre 4 et 8 semaines
Assembly Column Base 25 Base + Croc + Riv
Délai habituel entre 4 et 8 semaines
Spring Set of Pellican Grip
Délai habituel entre 4 et 8 semaines
Attatchment Stud
Délai habituel entre 4 et 8 semaines
Middle Collar
Délai habituel entre 4 et 8 semaines
28mm Pin + M12 Bolt
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
Sphere & Spring Set of 10
Délai habituel entre 4 et 8 semaines
Assembly Knob
Délai habituel entre 4 et 8 semaines
Base
Délai habituel entre 4 et 8 semaines
Stud
Délai habituel entre 4 et 8 semaines
Aluminium Tube Black
Délai habituel entre 4 et 8 semaines
19mm Tube + Stud
Délai habituel entre 4 et 8 semaines
25mm Tube with Gasket
Délai habituel entre 4 et 8 semaines
Complete Locking Lever Set
Délai habituel entre 4 et 8 semaines
The Manfrotto 275 Mini Clip Clamp is a versatile clamp that can accept a lighthead with a 5/8" receptor, or a stud. It can be mounted also on 16mm extension arms
Délai habituel entre 4 et 8 semaines
Assembly Pipe D=35
Délai habituel entre 4 et 8 semaines
25mm Tube with Gasket, Black
Délai habituel entre 4 et 8 semaines
Main Casting
Délai habituel entre 4 et 8 semaines
Assembly Pipe D=30
Délai habituel entre 4 et 8 semaines
Base Column with Casting & Rivets
Délai habituel entre 4 et 8 semaines
Top Casting, Orange, with Knob
Délai habituel entre 4 et 8 semaines
Knob Set for Tall Stand
Délai habituel entre 4 et 8 semaines
Top Half Spring with Knob & Pad
Délai habituel entre 4 et 8 semaines
Ratchet Handle with Screw & Washer
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25x1x680
Délai habituel entre 4 et 8 semaines
The Manfrotto 171 Mini Clamp is a handy mini clamp that can be used in a myriad of ways around the studio or on location. Lightweight and sturdy, it can clamp onto tubes with a maximum diameter of 1.38" (35mm), and has a load capacity of 2.2 lbs (1kg). It also features a 5/8" (16mm) socket at its base
Délai habituel entre 4 et 8 semaines
Top Spider
Délai habituel entre 4 et 8 semaines
Bottom Spider with Knob & Rivets
Délai habituel entre 4 et 8 semaines
Bottom Spider with Knob & Rivets
Délai habituel entre 4 et 8 semaines
Bottom Pole With 1/4" Stud
Délai habituel entre 4 et 8 semaines
Top Section with Stud
Délai habituel entre 4 et 8 semaines
Aluminium Tube 22x1x769
Délai habituel entre 4 et 8 semaines