Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Hook for Telescopic Hanger
Délai habituel entre 4 et 8 semaines
Manfrotto has pushed the envelope on their popular Nano stand with the introduction of the 5-section MS0490C Carbon Fiber Nanopole Stand The stand rises to a maximum height of 6.5 ft, has a minimum working height of 19.7 ft, a stable 39.4 inches footprint, and can support gear weighing up to 3.3 lb at maximum height mounted onto its 5/8 inches stud with...
Délai habituel entre 4 et 8 semaines
48"X48" 1/4 Stop Silk Scrim
Délai habituel entre 4 et 8 semaines
Shadow Range Colt Stand 1.0 Metre
This 10.7' C-Stand features chrome-plated steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. The legs fold flat for easy storage
Délai habituel entre 4 et 8 semaines
This 5.7' C-Stand has black steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. The legs fold flat for easy storage
Délai habituel entre 4 et 8 semaines
C + 40 inches Riser Section Only
Délai habituel entre 4 et 6 semaines
Riser Section for C+ Stand (40")
Délai habituel entre 4 et 6 semaines
20" C+ Riser Section (Black)
Délai habituel entre 4 et 6 semaines
Master Combo Stand (Silver)
Nightclub 35 Two Stage Telescopic Stand 3.5 Metre
Club 35 Two Stage Telescopic Stand 3.5 Metre
This 8.3' Stand features chrome-plated steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. The legs fold flat for easy storage
Délai habituel entre 4 et 8 semaines
Main Casting
Délai habituel entre 4 et 8 semaines
This B9005R Ratchet Handle for the Strato Safe Stand is a replacement handle with a sure-grip vinyl-rubber handle end that snaps and locks into position. Its ratcheting action allows you to reposition the handle or make a series of small cranking adjustments in tight situations where a full 360-degree turn is not possible
Délai habituel entre 4 et 8 semaines
Sprocket Column
Délai habituel entre 4 et 8 semaines
Boom Arm with sliding attachement, black
Délai habituel entre 4 et 8 semaines
The SHAPE 20 C-Stand with sliding leg combines a black anodized aluminum finish with a black powder coating, has a maximum height of 65 / 165 cm tall, and can support up to 25 lb / 11 kg of equipment. It is made of durable aluminum and has unique aluminum locking collars and knobs.
Wheel Set with Brakes (Black)
Délai habituel entre 4 et 8 semaines
Wheel Set with Brakes
Délai habituel entre 4 et 8 semaines
10 inches C Clamp with 2-5/8 inches Pins
Délai habituel entre 4 et 6 semaines
Roller Stand
Telescopic Wall Spreader Kit for Pipe 1-1/2" Schedule 40 (O.d.48.3mm)
Telescopic Wall Spreader Kit for Pipe 1-1/4" Schedule
This 5.7' C-Stand has chrome-plated steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. The legs fold flat for easy storage
Délai habituel entre 4 et 8 semaines
Anodized rail 3m long
Délai habituel entre 4 et 8 semaines
Boom Arm with sliding attachement
Délai habituel entre 4 et 8 semaines
Assembly Cable Plate
Délai habituel entre 4 et 8 semaines
Spring Loaded Turtle Base Only
Délai habituel entre 4 et 6 semaines
Stainless Steel Base Column
Délai habituel entre 4 et 8 semaines
Top Spider for Pipe 90mm
Délai habituel entre 4 et 8 semaines
Master 40" C Stand W/ Turtle Base (Black)
40" Master C-stand W/ Sliding Leg & Quick Release-black
40" Master C-stand W/ Sliding Leg & Quick Release
Master 40" C Stand W/ Turtle Base
Short Wall Boom, Black, 0.7 - 1.2m
Délai habituel entre 4 et 8 semaines
Assembly Chain
Délai habituel entre 4 et 8 semaines
Shells for Grip Head Set 5+5pc
Délai habituel entre 4 et 8 semaines
Master Combo Alu Senior
The Manfrotto Boom Assembly is comprised of three sections, extends to ~6.5 feet (2.1 m) and can easily be disassembled to 28 inch (71cm) for storage or transport.
Délai habituel entre 4 et 8 semaines
Spring Set Of 1000
Délai habituel entre 4 et 8 semaines
Magnetic Background Support Kit with Stand
Délai habituel entre 2 et 6 semaines.
0 mm 2" Polyholder w/sw. Spigot
Délai habituel entre 4 et 8 semaines
China Silk Scrim 48" x 48"
Délai habituel entre 4 et 8 semaines
24" x 36" Triple Scrim Black
Délai habituel entre 4 et 8 semaines
Pocket 5" C-Stand
Délai habituel entre 4 et 6 semaines
Autopole 2 Black, 2.1 - 3.7m MT
Délai habituel entre 4 et 8 semaines
Master 30" C Stand W/ Turtle Base - Black
L-cheese-plate 10"(25.4cm)x 16"(40.6 Cm) With 3/8" Hole
Master 30" C Stand W/ Turtle Base
30" Master C-stand W/ Sliding Leg & Quick Release-black
30" Master C-stand W/ Sliding Leg & Quick Release
The Falcon Eyes Autopole AP-4380M is a sturdy, professional autopole which is easy to mount between floor and ceiling or between two walls and now comes in a set of 2. The autopole has an adjustable height of minimum 245 cm (2 segments) to maximum 450 cm (4 segments). This autopole is very sturdy and comes in 3 parts (1 of which is extendable).
Délai habituel entre 2 et 4 semaines
Spare Part Pack ML120 30pcs
Délai habituel entre 4 et 8 semaines
Assembly Gamb LIV + Portar. + AST AVE
Délai habituel entre 4 et 8 semaines
Le Maxi Stand Black
Délai habituel entre 4 et 8 semaines
Telescopic Poly Holder, 40mm (1,6")
Délai habituel entre 4 et 8 semaines
Shells for Grip Head Set 5+5pc
Délai habituel entre 4 et 8 semaines
Assembly Supporto C / Manopole
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
Autopole 2 2.1 - 3.7m
Délai habituel entre 4 et 8 semaines
Nightclub 25 Two Stage Telescopic Stand 2.5 Metre
Club 25 Two Stage Telescopic Stand 2.5 Metre
Master 20" C Stand W/ Turtle Base (Black)
20" Master C-stand W/ Sliding Leg & Quick Release
Heavy Duty Light Stand
Délai habituel entre 3 et 6 semaines
Master 20" C Stand W/ Turtle Base
20" Master C-stand W/ Sliding Leg & Quick Release-black
Heavy Duty Baby Stand
This 10.75' Sliding Leg C-Stand features black steel construction and a 3-section column with 2 risers. The innovative design of the base allows the individual legs to be set at any angle allowing positioning in locations not possible with classic stands. One of the legs slides along the center column to accommodate uneven terrain. The legs fold flat for...
Délai habituel entre 4 et 8 semaines
Autopole 2 Black 2.0-2.7m
Délai habituel entre 4 et 8 semaines
Silver / Gold oval reflector 120 cm
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
All Corner for Butterfly Frame
Délai habituel entre 4 et 8 semaines
4"Castor Kit Combo Stands
4" Castor Kit Cine Combo Stands
4" Castor Kit Baby Roller Stands
4" Castor Kit Junior Roller/overheads
Slider with Cable Support
Délai habituel entre 4 et 8 semaines
Adapter 75/100 On Flowtech For Fluid Heads With 75 mm Ball On Flowtech 100
Délai habituel entre 4 et 8 semaines
L Bracket with Lock Bush
Délai habituel entre 4 et 8 semaines
All. Corner for Buterfly Frame
Délai habituel entre 4 et 8 semaines
Top Spider for Pipe 70mm
Délai habituel entre 4 et 8 semaines
Complete Leg Laser
Délai habituel entre 4 et 8 semaines
C Stand
Délai de livraison 8 semaines
Baby Kit Stand W/ Square Legs
Silver / White oval reflector 120 cm
Délai habituel entre 4 et 8 semaines
Gobo Plate Media (Vesa)
Délai habituel entre 4 et 6 semaines
Light Stand HD 300
Assembly Steel Pipe
Délai habituel entre 4 et 8 semaines
Autopole Black extends from 210cm to 370cm
Délai habituel entre 4 et 8 semaines
Autopole 2 1.5-2.7m
Délai habituel entre 4 et 8 semaines
Textile Soft Diffuser 4' x 4'
Délai habituel entre 4 et 8 semaines
Complete Leg
Délai habituel entre 4 et 8 semaines
Pack MLBATTADT-L7.2V Set of 6
Délai habituel entre 4 et 8 semaines
Base with 1 levelling leg, complete with feet
Délai habituel entre 4 et 8 semaines
extile White Block 4' x 4'
Délai habituel entre 4 et 8 semaines
Corner Assembly
Délai habituel entre 4 et 8 semaines
Falcon Eyes Professional Light Boom + Light Stand + Water bag LSB-5
Délai habituel entre 2 et 4 semaines
A folding stand base only. No wheels. It has a leveling leg extender for use on uneven terrain. Accepts 1-1/8" diameter Junior studs or stand risers. 8.3 in (21 cm) tall, 29.8 in (.75 M) footprint. Supports up to 88 lbs (40 kg)
Délai habituel entre 4 et 8 semaines
Complete Leg Laser
Délai habituel entre 4 et 8 semaines
Friction Assembly for Pantograph
Délai habituel entre 4 et 8 semaines
Magic Finger with 5/8inches Adapter
Délai habituel entre 4 et 6 semaines
Assembly Plug
Délai habituel entre 4 et 8 semaines
Wheel Set Diam 125mm, w/brakes
Délai habituel entre 4 et 8 semaines
Autopole extends from 210cm to 370cm
Délai habituel entre 4 et 8 semaines
Assembly Bushing
Délai habituel entre 4 et 8 semaines
Complete Leg
Délai habituel entre 4 et 8 semaines
Assembly Curva C / Manopole
Délai habituel entre 4 et 8 semaines
Master 40" C Stand W/ Sliding Legs (Black)
Master 40" C Stand W/ Sliding Legs
Autopole 1.5 - 2.7m, Black
Délai habituel entre 4 et 8 semaines
Reflector translucent 185 x 120 cm oval
Délai habituel entre 4 et 8 semaines
Grab Clamp with Baby Bushing
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Collar for Pipe 80mm
Délai habituel entre 4 et 8 semaines
Low Mighty Baby Stand
Detachable Heavy Duty C-clamp W/ 5/8"(28mm) Junior Receiver
Collar for Pipe 90mm
Délai habituel entre 4 et 8 semaines
Assembly Clamp
Délai habituel entre 4 et 8 semaines
Spring Set of 3
Délai habituel entre 4 et 8 semaines
Mobile and extremely stable light stand. Folding legs with lockable pivoting rollers, one leg can be leveled. Hole for standard 28 mm (1.1 in.) spigot, concealed standard 16 mm (0.6 in.) spigot.
Cheese Plate 10"X10"X1/2" With a Mitchell Insert
The Manfrotto Double Articulated Arm has three adjustable sections. The 396 Series of arms is more rigid that the 196 range to support heavier loads up to 11 lbs. Its extendable sliding arm system extends up to 34 inches in length, and features a quick lock system
Délai habituel entre 4 et 8 semaines
48" x 48" Silk Scrim
Délai habituel entre 4 et 8 semaines
Collar for Pipe 90mm
Délai habituel entre 4 et 8 semaines
Falcon Eyes Light Stand LM-6000HA Heavy Duty 600 cm
Délai habituel entre 2 et 4 semaines
This Manfrotto 146CS High Steel Stand Extension attaches to the top of your heavy duty stand and extends its height an additional 53 - 123.6" (1.4 x 3.1 m)
Délai habituel entre 4 et 8 semaines
Floating Leg for Wind-Up Stand
Délai habituel entre 4 et 8 semaines
Floating Leg for Wind-Up Stand
Délai habituel entre 4 et 8 semaines
C' Stand Turtle Base
C' Stand Turtle Base (Black)
Autopole 1.5 - 2.7m
Délai habituel entre 4 et 8 semaines
Textile Silk 4' x 4'
Délai habituel entre 4 et 8 semaines
Assembly Spider
Délai habituel entre 4 et 8 semaines
Floating Leg for Wind-Up Stand
Délai habituel entre 4 et 8 semaines
The MVH500AH Fluid Video Head with Flat Base from Manfrotto is designed with a wide platform, optimal for HDSLR camera bodies. Smooth and precise, it has a maximum load capacity of 17.6 lb and professional quality fluid cartridges on both its pan and tilt axes.
Délai habituel entre 4 et 8 semaines
Crank Case for Super Wind-Up
Délai habituel entre 4 et 8 semaines
Dedolight stackable stand. Small version fits Octodome soft case. Height: collapsed 87 cm (2.9) - max 250 cm (8.2) Weight: 1.3 kg (2.9 lb.)
Délai de livraison de 4 à 6 semaines
Midi-max Kit Stand
Master 30" C Stand W/ Sliding Legs
Master 30" C Stand W/ Sliding Legs (Black)
Magic Arm with 035
Délai habituel entre 4 et 8 semaines
Collar for Pipe 80mm
Délai habituel entre 4 et 8 semaines
The Falcon Eyes CS-2450 C-Stand with Boom Arm, also known as a century stand, is a durable and strong c-stand essential for videography.
Délai habituel entre 2 et 4 semaines
Reverse Stand
Délai de livraison de 4 à 6 semaines
Mount lights, cameras, or accessories with the RA-C330 C Light Stand with Boom Arm from SmallRig.
Délai habituel entre 4 et 5 semaines
Pack for MS0490A-1 Set of 10
Délai habituel entre 4 et 8 semaines
Assembly Friction 4MT
Délai habituel entre 4 et 8 semaines
Spring Set of 100
Délai habituel entre 4 et 8 semaines
Le Low Stand Black
Délai habituel entre 4 et 8 semaines
Assembly Giunto
Délai habituel entre 4 et 8 semaines
Complete Clamp Assembly
Délai habituel entre 4 et 8 semaines
Back Tube with Collar
Délai habituel entre 4 et 8 semaines
Grip Casting Complete Black
Délai habituel entre 4 et 8 semaines
Levleg + Wheel Carrier + Strut
Délai habituel entre 4 et 8 semaines
Knob with Spring Set of 100
Délai habituel entre 4 et 8 semaines
Assembly Tubo C / Rinforzo
Délai habituel entre 4 et 8 semaines
Grip Casting Complete
Délai habituel entre 4 et 8 semaines
Arm for Articulated Arm
Délai habituel entre 4 et 8 semaines
Steel Pipe with Knob
Délai habituel entre 4 et 8 semaines
30" x 36" Double Scrim Black
Délai habituel entre 4 et 8 semaines
This Manfrotto 146B High Aluminum Stand Extension attaches to the top of your heavy duty stand, and extends its height an additional 53 - 123.6" (1.4 x 3.1 m)
Délai habituel entre 4 et 8 semaines
The H6BAG Bag for Modular Frames is a sturdy synthetic fabric bag with webbed handles that encircle the entire bag for extra strength. The bag has zippered closure and can be used with the 4 x 4', 6 x 6', 8 x 8', 12 x 12' and 20 x 20' modular frames
Délai habituel entre 4 et 8 semaines
Magic Arm Alone, 630mm Long
Délai habituel entre 4 et 8 semaines
Heavy-weight stand with three-section air-cushioned telescope centre column. With 1/4" / 3/8" reversible thread pin, that can be attached either horizontally or vertically
Assembly Pipe
Délai habituel entre 4 et 8 semaines
Medium Duty Kit Stand Triple Riser - Black (20 Piece Minimum)
Délai habituel entre 4 et 6 semaines
The aptly named Snake Arm from Manfrotto is an ideal accessory for photographers or videographers who want to lighten their load with a compendium piece of gripware that can replace a stand or two. Fabricated with 4 sections of aluminum tubing, the 23.6" arm is able to twist into a multitude of angles and lock down via the ergonomic T-handle
Délai habituel entre 4 et 8 semaines
Crank Case
Délai habituel entre 4 et 8 semaines
Crank Case
Délai habituel entre 4 et 8 semaines
Medium Baby Kit Stand
48" x 48" Cutter
Délai habituel entre 4 et 8 semaines
COMPLETE LEVLEG SUPPORT
Délai habituel entre 4 et 8 semaines
Assembly Tubes
Délai habituel entre 4 et 8 semaines
The Manfrotto Double Articulated Arm has three adjustable sections. The 396 Series of arms is more rigid that the 196 range to support heavier loads up to 11 lbs. Its extendable sliding arm system extends up to 34 inches in length, and features a quick lock system
Délai habituel entre 4 et 8 semaines
Autopole 1.0 - 1.7m, Black
Délai habituel entre 4 et 8 semaines
Mini Autopole clamp bar, black, 2.1 - 3.7 m (1 pcs.)
Délai habituel entre 4 et 8 semaines
Frame Section Male 800T
Délai habituel entre 4 et 8 semaines
Floating Leg for Wind-Up Stand
Délai habituel entre 4 et 8 semaines
Mighty Runway Base Stand W/ One Extra 12cm Long Leg and Two 3/8"-16 Female Threaded
Kit Guarnizioni E Or
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Lock Off Knob + Shoe Set 5 Pcs
Délai habituel entre 4 et 8 semaines
Master 20" C Stand W/ Sliding Legs
Master 20" C Stand W/ Sliding Legs (Black)
Variable Friction Magic Arm with Camera Bracket
Délai habituel entre 4 et 8 semaines
The Manfrotto 143A Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The lever tightens and locks for precise positioning of a small light head or camera. The Magic Arm has 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads
Délai habituel entre 4 et 8 semaines
Kupo Click Stands are light weight aluminum kit stands perfect for the location photographer.
Kupo Click Stands are light weight aluminum kit stands perfect for the location photographer. They collapse flat and attach to one another with a simple click for easy transportation and storage.
Complete Leg With Fastener
Délai habituel entre 4 et 8 semaines
The Manfrotto MBAG120PN Padded Tripod Bag (Black) is a padded ballistic nylon bag designed to carry Bogen/Manfrotto tripod with a head up to 45" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried
Délai habituel entre 4 et 8 semaines
Spring Set of 100
Délai habituel entre 4 et 8 semaines
50mm 2.0" Polyholder with 16mm Spigot
Délai habituel entre 4 et 8 semaines
Micro Friction Arm Kit
Délai habituel entre 4 et 8 semaines
24" x 36" Triple Scrim Cover
Délai habituel entre 4 et 8 semaines
Collar for Pipe 70mm
Délai habituel entre 4 et 8 semaines
Black Back Tube with Collar
Délai habituel entre 4 et 8 semaines
Collar for Pipe 60mm
Délai habituel entre 4 et 8 semaines
Sand Bag Large 35kg
Délai habituel entre 4 et 8 semaines
Assembly Tube + Sleeve
Délai habituel entre 4 et 8 semaines
Pneumatic Wheel
Délai habituel entre 4 et 8 semaines
Midi Baby Kit Stand
Collar for Pipe 70mm
Délai habituel entre 4 et 8 semaines
Plug
Délai habituel entre 4 et 8 semaines
Levleg + Wheel Carrier + Strut
Délai habituel entre 4 et 8 semaines
Rack, Mombo Combo,4x Black
Délai habituel entre 4 et 6 semaines
Baby Kit Stand
45mm Diameter Column + Cap & Gasket
Délai habituel entre 4 et 8 semaines
Collar for Pipe 60mm
Délai habituel entre 4 et 8 semaines
Assembly Tube and Spike
Délai habituel entre 4 et 8 semaines
The SHAPE aluminum lightweight Baby Kit Stand with Square Legs has a black anodized aluminum finish, has a maximum height of 12.9' / 325 cm tall, and can support up to 25 lb. / 11 kg of equipment. It is made of durable aluminum and has unique aluminum locking collars and knobs. The legs are square, and at the top, is mounted a standard 750 / 5/8" / 16mm...
Wheel Set of 3, 100mm with brakes and adapter for legs
Délai habituel entre 4 et 8 semaines
Infra Red Remote Control Only
Délai habituel entre 4 et 8 semaines
Expan Drive Set with Red Metal Chain
Délai habituel entre 4 et 8 semaines
Expan Drive Set with Black Metal Chain
Délai habituel entre 4 et 8 semaines
Expan Drive Set with Gray Metal Chain
Délai habituel entre 4 et 8 semaines
Expan Drive Set with Red Metal Chain
Délai habituel entre 4 et 8 semaines
Leg / Strut / Leg Fastener
Délai habituel entre 4 et 8 semaines
This Double Riser Column designed to fit into an Avenger turtle base. This black steel column starts at 46" (1.2 m) and has 3 sections and 2 risers. Its maximum length is 9.3' (2.8 m)
Délai habituel entre 4 et 8 semaines
Additional Spring for pantograph top 2C
Délai habituel entre 4 et 8 semaines
Assembly Tube + Hook
Délai habituel entre 4 et 8 semaines
Swiveling Pipe C Clamp W/universal Head
C Clamp W/ 1-1/4" Pipe Holder
Gold/white 95cm Oval Reflec
Délai habituel entre 4 et 8 semaines
Steel Sliding Leg 1290mm with Caps
Délai habituel entre 4 et 8 semaines
Assembly Levelling Leg
Délai habituel entre 4 et 8 semaines
Levleg + Wheel Carrier & Braces
Délai habituel entre 4 et 8 semaines
Autopole 1.0 - 1.7m
Délai habituel entre 4 et 8 semaines
The Manfrotto 396B-2 Articulated Arm supports up to 11 lbs with its built-in camera bracket. The 396B-2 offers excellent performance: robustness, lightness and versatility. The 396 family has been developed to provide greater rigidity and support than the 196 range, while maintaining flexibility thanks to its extendable sliding arm, further enhanced by...
Délai habituel entre 4 et 8 semaines
Complete Levleg Support, Black
Délai habituel entre 4 et 8 semaines
Steel Tube D=38
Délai habituel entre 4 et 8 semaines
Security Cable Set of 5
Délai habituel entre 4 et 8 semaines
Black Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Grab Clamp
Délai habituel entre 4 et 8 semaines
Silver / White oval reflector 95 cm
Délai habituel entre 4 et 8 semaines
Black Steel Pipe 25x568 + Bush.
Délai habituel entre 4 et 8 semaines
ASS TUBO C/RINFORZO
Délai habituel entre 4 et 8 semaines
Levleg + Wheel Carrier & Braces
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Central Column
Délai habituel entre 4 et 8 semaines
This is an 30" C-Stand Column. It is constructed of black steel, and is designed to fit into an Avenger C-Stand turtle base. Its main section is 30" long. When the 2 risers are extended, it is 6.75' (2.0 m) long
Délai habituel entre 4 et 8 semaines
Top Section with Collar & Stud
Délai habituel entre 4 et 8 semaines
Steel Pipe 35x965 with Knob
Délai habituel entre 4 et 8 semaines
This Double Riser Column designed to fit into an Avenger turtle base. This chrome-plated steel column starts at 46" (1.2 m) and has 3 sections and 2 risers. Its maximum length is 9.3' (2.8 m)
Délai habituel entre 4 et 8 semaines
Kaiser desktop lighting set 2
Levleg + Brace + Wheel Carrier
Délai habituel entre 4 et 8 semaines
The Manfrotto 143N Magic Arm without Camera Bracket is designed to hold a light fixture in place, in a variety of situations. It is an elbow arm, with sure locking lever control at the pivot. It will accept any light fixture up to 6.6 lbs that has a baby (5/8") receptor
Délai habituel entre 4 et 8 semaines
24" x 72" Cutter
Délai habituel entre 4 et 8 semaines
45mm Diameter Column + Cap & Gasket
Délai habituel entre 4 et 8 semaines
Shells for Grip Head Set 5+5 Pc
Délai habituel entre 4 et 8 semaines
Baby Boom - Steel
Silver/Gold 95 cm Oval Reflec
Délai habituel entre 4 et 8 semaines
Leg / Strut / Leg Fastener
Délai habituel entre 4 et 8 semaines
Black Stell Pipe 25x818 + Bush
Délai habituel entre 4 et 8 semaines
Sunlite / White 95cm Oval Reflector
Délai habituel entre 4 et 8 semaines
Steel Sliding Leg 1318 with Cap
Délai habituel entre 4 et 8 semaines
The Manfrotto MBAG100PN Padded Tripod Bag (Black) is a padded ballistic nylon bag designed to carry Bogen/Manfrotto tripod with a head up to 39" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
40 inches Hollywood Head & Arm-Complete - Black
Délai habituel entre 4 et 6 semaines
C-Type Clamp with M12 Screw
Délai habituel entre 4 et 8 semaines
This is an 30" C-Stand Column. It is constructed of chrome-plated steel, and is designed to fit into an Avenger C-Stand turtle base. Its main section is 30" long. When the 2 risers are extended, it is 6.75' (2.0 m) long
Délai habituel entre 4 et 8 semaines
MP Eye Coupler Swivel Tilt 150
Délai habituel entre 4 et 8 semaines
Runway Base Stand
C-Stand Mini Base
Délai habituel entre 4 et 8 semaines
This 20" Double Riser 4.5' Column for C-Stand is designed to fit into an Avenger turtle base. It is constructed of black steel. It has 1 section, 2 risers and extends to a length of 4.5' (1.4 m)
Délai habituel entre 4 et 8 semaines
Safety Cable Set of 5
Délai habituel entre 4 et 8 semaines
Gear Z=32
Délai habituel entre 4 et 8 semaines
Lower Tube (Old Model)
Délai habituel entre 4 et 8 semaines
Assembly Tube and Spike
Délai habituel entre 4 et 8 semaines
Tube For Column
Délai habituel entre 4 et 8 semaines
Handle
Délai habituel entre 4 et 8 semaines
Steel Tube with Cap
Délai habituel entre 4 et 8 semaines
Steel Tube D=38
Délai habituel entre 4 et 8 semaines
Top Column With Bushing
Délai habituel entre 4 et 8 semaines
Top Column With Bushing
Délai habituel entre 4 et 8 semaines
Black Levleg + Wheel Carrier & Brace
Délai habituel entre 4 et 8 semaines
Steel Extension Pole, 2 Sections, 52-87"
Délai habituel entre 4 et 8 semaines
China Silk SCcrim 24' x 36'
Délai habituel entre 4 et 8 semaines
Gear Box Complete
Délai habituel entre 4 et 8 semaines
Tripod base with 28 mm socket, steel, black
Délai habituel entre 4 et 8 semaines
Mini Friction Arm
Délai habituel entre 4 et 8 semaines
Gear for Super Wind-Up
Délai habituel entre 4 et 8 semaines
Black Stell Pipe 25x818 + Bush
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25x955 with Collar
Délai habituel entre 4 et 8 semaines
40mm Diameter Column + Cap & Gasket
Délai habituel entre 4 et 8 semaines
Pack for B6040XK Set of 2
Délai habituel entre 4 et 8 semaines
Spring Type 12 Red. Additional spring for pantograph top 2C
Délai habituel entre 4 et 8 semaines
Steel Corner for Butterfly
Délai habituel entre 4 et 8 semaines
Wheel Set 100mm with Brakes
Délai habituel entre 4 et 8 semaines
Universal Stand W/air Cushion
Junior Stand Extension
Wall Spreader Set for Pipe 1-1/4" Schedule 40 (O.d.42.4mm)
20 inches Hollywood Head & Arm-Complete - Black
Délai habituel entre 4 et 6 semaines
The Double Riser 4.5' Column for C-Stand is designed to fit into an Avenger turtle base. It is constructed of chrome-plated steel. It has 1 section, 2 risers and extends to a length of 4.5' (1.4 m)
Délai habituel entre 4 et 8 semaines
The Manfrotto 396AB-2 Articulated Arm supports up to 11 lbs and offers excellent performance: robustness, lightness and versatility. The 396 family has been developed to provide greater rigidity and support than the 196 range, while maintaining flexibility thanks to its extendable sliding arm, further enhanced by its quick lock system
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x568 + Collar + Bush.
Délai habituel entre 4 et 8 semaines
Assembly Supporto C / Manopole
Délai habituel entre 4 et 8 semaines
Top Column with Bushing
Délai habituel entre 4 et 8 semaines
Accessory kit for off-camera flash shots with two shoe-mount flashes, also suitable for lighting design with two camera lights
Aluminium Column with Collar
Délai habituel entre 4 et 8 semaines
Professional Variable Friction Arm
Délai habituel entre 4 et 8 semaines
Black Leg / Strut / Leg Fastener
Délai habituel entre 4 et 8 semaines
Jumbo Grip Head Black
Délai habituel entre 4 et 8 semaines
Universal Head Casting Japan
Délai habituel entre 4 et 8 semaines
Universal Head Casting Black J/V
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25x1105 with Collar
Délai habituel entre 4 et 8 semaines
Hub
Délai habituel entre 4 et 8 semaines
Assembly Crank
Délai habituel entre 4 et 8 semaines
The Manfrotto 142B Aluminum Stand Extension extends the height of your heavy duty cine stand 49.2 - 82.7" (1.2 - 2.1 m). It has two black sections, one riser
Délai habituel entre 4 et 8 semaines
Support for Butterfly with Knobs
Délai habituel entre 4 et 8 semaines
Complete Leg With Fastener
Délai habituel entre 4 et 8 semaines
Rotating Bushing with Pin + Cable
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25 x 955 with Collar
Délai habituel entre 4 et 8 semaines
Crank Case
Délai habituel entre 4 et 8 semaines
Mini Light Stand (Black, 48.5")
Délai de livraison de 4 à 6 semaines
The Falcon Eyes LSB-2 Light Boom + Light Stand + Counterweight is supplied with a Double Tube Clamp, which is compatible with all light stands with a diameter of 3 cm.
Délai habituel entre 2 et 4 semaines
Light-weight stand with three-section air-cushioned telescope centre column. With 16 mm standard spigot and 3/8" connecting thread. 1/4" adapter included. Folds down flat. Setting height: approx. 88-237 cm (34.6- 93.3 in.)
Assembly Semigusci + Viterie Scatola
Délai habituel entre 4 et 8 semaines
Assembly L Box Cover
Délai habituel entre 4 et 8 semaines
Black Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
40mm Diameter Column + Cap & Gasket
Délai habituel entre 4 et 8 semaines
Slider with Cable Support
Délai habituel entre 4 et 8 semaines
Manfrotto Wind Up Maintenance Tools
Délai habituel entre 4 et 8 semaines
Pack for MLFILTERCOL Set of 10
Délai habituel entre 4 et 8 semaines
Alluminium Leg L=1240 with Cap
Délai habituel entre 4 et 8 semaines
Spare Part Pack ML360H 10pcs
Délai habituel entre 4 et 8 semaines
18" x 24" Triple Scrim Black
Délai habituel entre 4 et 8 semaines
Assembly Tubo
Délai habituel entre 4 et 8 semaines
Column Assembly
Délai habituel entre 4 et 8 semaines
Casting for Autopole II
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25 x 1105 with Collar
Délai habituel entre 4 et 8 semaines
Light stand bag / Roll bag medium - Easy transport of many tripods. Size 110 x 22 x 22cm.
Aluminium Pipe 25 x 820mm with Collar
Délai habituel entre 4 et 8 semaines
Pipe 610mmx3 with Pin
Délai habituel entre 4 et 8 semaines
Black Leg With Fastener
Délai habituel entre 4 et 8 semaines
Large Counterweight
Délai habituel entre 4 et 8 semaines
Micro Arm with Anti-Rotation
Délai habituel entre 4 et 8 semaines
Part of the Sky Track Rail System. It has a 5/8" female receptor on one side and a 1-1/8" receptor on the other. It is used to attach fixtures or accesories that have a 1-1/8" Junior spigot. Load capacity: 220 lbs (100 kg)
Délai habituel entre 4 et 8 semaines
Holder For 6 Backgrounds
Délai habituel entre 4 et 8 semaines
Complete Bushing
Délai habituel entre 4 et 8 semaines
Assembly Tubo
Délai habituel entre 4 et 8 semaines
Allum Pipe 25x820 with Collar
Délai habituel entre 4 et 8 semaines
Allum. Pipe 25x568 + Collar + Bush.
Délai habituel entre 4 et 8 semaines
Gear Box Complete
Délai habituel entre 4 et 8 semaines
Master Shorty Stand
A boom is an essential tool for positioning a light fixture either directly above the photographer videographer or cinematographer to create a beautiful flat light or positioned above the subject acting as a hair light.
Steel Pipe 40x1117 with Collar
Délai habituel entre 4 et 8 semaines
Castor Kit (Followspot, Studio 2000,3500,5000)
Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
This A2007 Mini Base for C-Stand has a 1 1/8" receiver and is designed to accept Avenger column risers of various sizes. It is constructed of chrome-plated steel. The smaller footprint of this base enables the c-stand to be placed in crowded areas on the set
Délai habituel entre 4 et 8 semaines
Castor Kit (Easylift)
The Kupo Single Handed Stand is a 8' aluminum lightweight kit stand essential for the solo location photographer.
Assembly Wheel Position Stopper
Délai habituel entre 4 et 8 semaines
Bottom Column For Low Base Windup
Délai habituel entre 4 et 8 semaines
Wind Bracing Kit for 087NW
Délai habituel entre 4 et 8 semaines
Knob Set Of 100
Délai habituel entre 4 et 8 semaines
Assembly Tube + Sleeve
Délai habituel entre 4 et 8 semaines
Fixed Baby Side Arm
Délai habituel entre 4 et 8 semaines
Brake Bushing
Délai habituel entre 4 et 8 semaines
Pack for MLSPECTRA2 Set of 6
Délai habituel entre 4 et 8 semaines
Steel Sliding Leg 915mm w/Caps
Délai habituel entre 4 et 8 semaines
The Claw
Délai habituel entre 4 et 6 semaines
Telescopic Crossbar
Délai habituel entre 2 et 6 semaines.
Assembly Croc Inf + Manop Avenger
Délai habituel entre 4 et 8 semaines
Tripod Bag Padded 120cm
Délai habituel entre 4 et 8 semaines
Manfrotto Nanopole Stand
Délai habituel entre 4 et 8 semaines
With 4 risers and baby pin (5/8") made of very lightweight but durable aluminium. Extends from 19.5 in to 7 ft 6 in (50 cm to 229 cm).
10"X42" CUTTER
Délai habituel entre 4 et 8 semaines
Pivoting Clamp
Délai habituel entre 4 et 8 semaines
Assembly Main Casting + Knob
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x818 with Collar Black
Délai habituel entre 4 et 8 semaines
Long Pipe for Butterfly Frame
Délai habituel entre 4 et 8 semaines
Assembly Spider
Délai habituel entre 4 et 8 semaines
The LM-1650HA from Falcon Eyes is an extra sturdy tripod with thick tubes and a compact spreading position.
Délai habituel entre 2 et 4 semaines
Falcon Eyes Autopole AP-4500H H 1,50/4,50 m
Délai habituel entre 2 et 4 semaines
dedolight stand, small. Available only in combination with K200-3 Kit.
Délai de livraison de 4 à 6 semaines
Universal Stand
10" C-type W/ Baby Stud
18" China Ball Bracketw/e27 Socket
18’’ China Ball Bracket W/e27 Scoket
Allumin. Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Tube + Sleeve
Délai habituel entre 4 et 8 semaines
Assembly Shell for Wheel
Délai habituel entre 4 et 8 semaines
Bottom Casting
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x818 with Collar
Délai habituel entre 4 et 8 semaines
Universal Head Casting
Délai habituel entre 4 et 8 semaines
Suction Cup
Délai habituel entre 4 et 8 semaines
Baby Drop Down
Délai habituel entre 4 et 6 semaines
Super Clamp Grip Head
Délai habituel entre 4 et 8 semaines
Flextension Kit with Flag
Délai habituel entre 4 et 8 semaines
Universal Head Casting
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Assembly Gamb LIV Black + Portar. + Ast
Délai habituel entre 4 et 8 semaines
Pack for A2018L Set of 5
Délai habituel entre 4 et 8 semaines
Pack for 387XU Set of 2
Délai habituel entre 4 et 8 semaines
Bottom Column for Wind-Up + Cap
Délai habituel entre 4 et 8 semaines
Aluminum Leg L=962 with Cap
Délai habituel entre 4 et 8 semaines
Inner Carton Set of 10
Délai habituel entre 4 et 8 semaines
3rd Tube Section for A330
Délai habituel entre 4 et 8 semaines
Levleg & Brace + Knob
Délai habituel entre 4 et 8 semaines
Universal Head Casting 25mm 5/8
Délai habituel entre 4 et 8 semaines
Steel Tube D=38
Délai habituel entre 4 et 8 semaines
Assembly Crank
Délai habituel entre 4 et 8 semaines
Main Casting
Délai habituel entre 4 et 8 semaines
Tube Kit for 1005BAC
Délai habituel entre 4 et 8 semaines
Spring Type 4 Blue. Additional spring for pantograph top 4C
Délai habituel entre 4 et 8 semaines
The Manfrotto MBAG90PN Padded Tripod Bag (Black) is a padded ballistic nylon bag designed to carry Bogen/Manfrotto tripod with a head up to 35" long. Thermoform padding holds the tripod in place and protects it, especially the head, during transport. It also serves a double purpose by protecting the tripod's hard edges when it is carried
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x930 with Collar
Délai habituel entre 4 et 8 semaines
Wheel Set of 3, 75mm with brakes and adapter for legs
Délai habituel entre 4 et 8 semaines
Bottom Casting
Délai habituel entre 4 et 8 semaines
Universal Head Casting Black
Délai habituel entre 4 et 8 semaines
Upper Tube Section for A410C
Délai habituel entre 4 et 8 semaines
4th Tube Section for A330
Délai habituel entre 4 et 8 semaines
Dia. 100mm Caster W/brake ( Set of 3)
Steel Sliding Leg 1318mm with Cap
Délai habituel entre 4 et 8 semaines
Universal Head Casting Black
Délai habituel entre 4 et 8 semaines
24" x 30" Double Scrim Cover
Délai habituel entre 4 et 8 semaines
Expan
Délai habituel entre 4 et 8 semaines
Light stand AutoFold L
Bottom Aluminium Tube for A330
Délai habituel entre 4 et 8 semaines
Assembly Body
Délai habituel entre 4 et 8 semaines
Assembly Tube + Sleeve
Délai habituel entre 4 et 8 semaines
Assembly Universal Bushing
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x461 + Collar + Bush.
Délai habituel entre 4 et 8 semaines
25mm Column
Délai habituel entre 4 et 8 semaines
Leg & Brace + Wheel Holder
Délai habituel entre 4 et 8 semaines
Wheel Support
Délai habituel entre 4 et 8 semaines
Master Classic Stand
Dia. 100mm Caster W/brake, W/30mm Square Adapter (Set of 3)
Light stand bag / Roll bag small - Accommodates 4 tripods.Size 90 x 19 x 19cm.
Light stand bag / Stand bag medium - Easy transport for multiple stands. Size 110 x 24 x 22cm
Mc for 420NSB Set of 4
Délai habituel entre 4 et 8 semaines
Assembly Semigusci + Viti Scat. Arr
Délai habituel entre 4 et 8 semaines
Black Levleg + Strut + Rivet
Délai habituel entre 4 et 8 semaines
Pelican Gaffer Grip
Délai habituel entre 4 et 8 semaines
Assembly Giunzione C / Manopole
Délai habituel entre 4 et 8 semaines
Self Locking Collar
Délai habituel entre 4 et 8 semaines
Holder For 4 Backgrounds
Délai habituel entre 4 et 8 semaines
The Kupo 045 medium lighting stand comes complete with four risers, allowing it to reach over 4m in height.
Suction cup for small fixtures and lightweight equipment
Délai habituel entre 4 et 8 semaines
The Sky Track Rail System is a modular overhead lighting suspension system which can be expanded or modified to your requirements. It provides prcise positioning of lights with ease and speed, eliminating the clutter of light stands and power cables on the floor. The system utilizes a combination of rails, carriages, telescopic posts, and manual...
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Mini Autopole
Délai habituel entre 4 et 8 semaines
Assembly Body
Délai habituel entre 4 et 8 semaines
Extension Column (Max. 302cm)
Extension Column (Max. 302cm) -black
Pack for MA050ASC Set of 10
Délai habituel entre 4 et 8 semaines
Black Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Assembly Tubo
Délai habituel entre 4 et 8 semaines
Century Stand Base
Century Stand Base(Black)
Handheld Tripod W/1/4 Male Thread
Steel Sliding Leg 915mm with Caps
Délai habituel entre 4 et 8 semaines
Assembly Pipe 20x1,5x975
Délai habituel entre 4 et 8 semaines
Cable Support for Butterfly Frame
Délai habituel entre 4 et 8 semaines
A staple on any film or video set, the Manfrotto 175F-2 Cold Shoe Clamp is a great way to lighten your gear bag while utilizing your on-camera flash to light your subject.
Délai habituel entre 4 et 8 semaines
Pack for 5001b Set of 10
Délai habituel entre 4 et 8 semaines
Top Section with Adjusting Collar
Délai habituel entre 4 et 8 semaines
Universal Head Castring
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25X890 with Collar
Délai habituel entre 4 et 8 semaines
Steel Tube 35x1,2x2440
Délai habituel entre 4 et 8 semaines
Steel Sliding Leg for A420/430
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x818 + Collar + Bush.
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Extension Column (Max. 227cm)
Waterproof Arm Sleeve Cover for Steadicam(Set of 2)
C-Stand Riser Column
Crank Handle Complete with Shaft
Délai habituel entre 4 et 8 semaines
Tripod Bag Padded 100cm
Délai habituel entre 4 et 8 semaines
Lever Set of 5
Délai habituel entre 4 et 8 semaines
Spring Type 4 Red. Additional spring for pantograph top 2C
Délai habituel entre 4 et 8 semaines
Levleg & Brace, Black + Knob
Délai habituel entre 4 et 8 semaines
Black Steel Pipe 25x670 with Collar
Délai habituel entre 4 et 8 semaines
Assembly Tube + Knob
Délai habituel entre 4 et 8 semaines
Alluminum Pipe 45x1,5x1900
Délai habituel entre 4 et 8 semaines
Assembly Column 30 + Codolo
Délai habituel entre 4 et 8 semaines
Assembly Knob Set of 5
Délai habituel entre 4 et 8 semaines
Alluminum Pipe 40x1,5x2000
Délai habituel entre 4 et 8 semaines
Leg & Brace + Wheel Holder
Délai habituel entre 4 et 8 semaines
Top Section with Adjusting Collar
Délai habituel entre 4 et 8 semaines
Background Holder Hooks for 6 Backgrounds. Wall Mountable
Délai habituel entre 4 et 8 semaines
Versatile 15cm (5.9") friction arm with interchangeable 1 /4" attachments and additional 3/8 adapter included. Attachments can easily be replaced by using the included hex key included and are compatible with a range of different adapters
Délai habituel entre 4 et 8 semaines
Extention Bl. 2 SECT.75 To 110
Délai habituel entre 4 et 8 semaines
24" x 36" 1/4 Stop Silk Scrim
Délai habituel entre 4 et 8 semaines
24" x 36" Double Scrim Cover
Délai habituel entre 4 et 8 semaines
Assembly Tube
Délai habituel entre 4 et 8 semaines
Spacer for Spider Stop D 90mm
Délai habituel entre 4 et 8 semaines
Bottom Column For Wind-Up + Cap
Délai habituel entre 4 et 8 semaines
Steel Pipe 40x905mm
Délai habituel entre 4 et 8 semaines
Steel Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Aluminium Pipe 25x1078 with Collar
Délai habituel entre 4 et 8 semaines
Bag for Dots and Fingers Kit
Délai habituel entre 4 et 8 semaines
Crank Handle with Pin for Wind Up
Délai habituel entre 4 et 8 semaines
40" Extension Arm + Grip Head
Délai habituel entre 4 et 8 semaines
Falcon Eyes Wall Boom WB-2100
Délai habituel entre 2 et 4 semaines
Falcon Eyes Autopole AP-4380M H 2,45/4,50 m
Délai habituel entre 2 et 4 semaines
Falcon Eyes Autopole AP-3500H H 1.50/3.50 m
Délai habituel entre 2 et 4 semaines
Safety air cushion for shock-absorbing. Free to adjust the height from 94 cm to 280cm. Made of high-strength, durable metals. Quick and efficient on/off the flip lock. Flat stainless steel 1/4"-20 threaded adapter for higher compatibility and securer accessory connection.
Délai habituel entre 4 et 5 semaines
Aluminium Pipe 25 x 890 Mm with Collar
Délai habituel entre 4 et 8 semaines
Tube
Délai habituel entre 4 et 8 semaines
This Manfrotto R545,04 Complete Leg Assembly is a spare or replacement part for the 545B, 545GB, 546B, and 546GB tripods.
Délai habituel entre 4 et 8 semaines
Steel Rod 30x30x900
Délai habituel entre 4 et 8 semaines
Half Arm with 1/4" Attachment
Délai habituel entre 4 et 8 semaines
Black Steel Pipe 25x568 with Collar
Délai habituel entre 4 et 8 semaines
Bag for Kit STAT./ ASTA
Délai habituel entre 4 et 8 semaines
Flexible Arm without Spigot
Délai habituel entre 4 et 8 semaines
Swivel Grip Head, Black
Délai habituel entre 4 et 8 semaines
Assembly Tube + Sleeve
Délai habituel entre 4 et 8 semaines