Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Single Black Lavalier Windjammer
Délai habituel entre 4 et 5 semaines
Single Grey Lavalier Windjammer
Délai habituel entre 4 et 5 semaines
Windscreen to MK4
45/100 Foam, Single
Délai habituel entre 4 et 5 semaines
Neumann TLM 103 Foam
Délai habituel entre 4 et 5 semaines
Neumann TLM 102 Foam
Délai habituel entre 4 et 5 semaines
WS400/700 Windscreen VT401HS/401/VT700, Black WS400/700B - beige WS400/700H
Délai de livraison habituel 4 semaines
Protect your EleMent Series Microphone with the PF-100 Pop Screen from Mackie. This pop filter is sized specifically for EleMent Series microphones, which is good, because it attaches directly to the capsule by means of included elastic bands. Once affixed to the mic, it helps reduce low-frequency pops and thumps, filtering them out of your voice for the...
Délai habituel entre 2 et 3 semaines
18cm SGM Foam Windjammer for Sennheiser ME66
Délai habituel entre 4 et 5 semaines
10 cm Standard Hole Foam
Délai habituel entre 4 et 5 semaines
18 cm Standard Hole Foam
Délai habituel entre 4 et 5 semaines
15 cm Standard Hole Foam
Délai habituel entre 4 et 5 semaines
DIY kit in Softie fur
Délai habituel entre 4 et 5 semaines
DIY Kit in mini fur
Délai habituel entre 4 et 5 semaines
18 cm Large Hole Foam
Délai habituel entre 4 et 5 semaines
Lavalier Foams (BEIGE)
Délai habituel entre 4 et 5 semaines
Lavalier Foams (BROWN)
Délai habituel entre 4 et 5 semaines
Neoprene-coated Mini Lavalier Foam
Délai habituel entre 4 et 5 semaines
Windscreen charcoal grey for OPUS83 - MC910/930/950 - M101/201/422 - MCE84/93/94
The Rycote 104410 12cm Standard Hole SGM Foam is ideal for protecting your shotgun microphone from the elements, especially wind noise.
Délai habituel entre 4 et 5 semaines
The WS8 Deluxe Windshield from Rode Microphone is an easy-to-use high-performance windshield for microphones of 0.79 (20mm) diameter and 1.06 (27mm) capsule depth. It is designed for use with the NT5, NT55, and NT6 small diaphragm condenser microphones.
Ceiling mount black
Ceiling mount white
WS100/8 Special Windscreen with rubber, Black
Délai de livraison habituel 4 semaines
Mini Windjammer for VP83 / VP83F
Délai habituel entre 4 et 5 semaines
The DUA0573 Windscreen from DPA Microphones is designed for use with 4090 / 4091 Omni Microphones. It is well suited for outdoor applications and for speech and singing at close distances.
DPA's UA0896 Windscreen for 0.75" (19mm) Microphones works well indoors and outdoors but is best suited for vocal performances from short distances.
Foam windshield for 4003/4006
Deluxe windscreen for Videomicro, Videomic Me, pink
WS-Chroma is a set of two foam windshields for the VideoMic NTG coloured blue and green, making them suitable for chroma keying.
Deluxe Wind Shield for Videomicro, Videomic Me, Orange
Deluxe Wind Shield for Videomicro, Videomic Me, Green
Deluxe Wind Shield for Videomicro, Videomic Me, Blue
SmallRig Furry Windscreen for Panasonic LUMIX S5 II / S5 IIX 4245 is designed to eliminate wind noise for better sound quality in outdoor scenes thanks to the selected artificial wool and thick linings. It connects the cameras hot shoe via a cold shoe adapter, which is made of lightweight and durable aluminum alloy, and features protective rubber pads at...
Délai habituel entre 4 et 5 semaines
Advanced Overcovers (Pack), Black
Délai habituel entre 4 et 5 semaines
Advanced Overcovers (Pack), Grey
Délai habituel entre 4 et 5 semaines
Advanced Overcovers (Pack), Beige
Délai habituel entre 4 et 5 semaines
Advanced Overcovers (Pack), White
Délai habituel entre 4 et 5 semaines
Windscreen
Perfect for outdoor applications such as video shoots and location recording, the Sennheiser MZH 200 is a furry windshield designed to provide effective protection against wind noise for Sennheiser's MKE 200 shotgun microphone.
Perfect for outdoor applications such as video shoots and location recording, the Sennheiser MZH 400 is a furry windshield designed to provide effective protection against wind noise for Sennheiser's MKE 400 shotgun microphone.
The Rode WS-HS1-P Pop Filter is a foam windscreen for suppressing popping and wind noise on the Rode HS1 microphone. It is supplied in packs of 3.
Deluxe Wind Shield for Video Micro, Videomic ME
Overcover Pack, 30 uses (re-useable fur covers)
Délai habituel entre 4 et 5 semaines
Black Overcovers: 30 x Stickies & 6 x Black Fur Discs
Délai habituel entre 4 et 5 semaines
Grey Overcovers: 30 x Stickes & 6 Grey Fur Discs
Délai habituel entre 4 et 5 semaines
White Overcovers: 30 x Stickies & 6 White Fur Discs
Délai habituel entre 4 et 5 semaines
Neoprene coated Lavalier Foam
Délai habituel entre 4 et 5 semaines
A set of 3 extra windjammers in black for the Tentacle Lavalier Microphone.
Délai habituel entre 4 et 6 semaines
Miniature Windscreen for VT701/VT901 Beige
Délai de livraison habituel 4 semaines
Miniature Windscreen for VT403/403WA White
Délai de livraison habituel 4 semaines
Miniature Windscreen for VT DUPLEX-VOCAL Beige
Délai de livraison habituel 4 semaines
Miniature Windscreen for VT401 Beige
Délai de livraison habituel 4 semaines
Miniature Windscreen for VT401
Délai de livraison habituel 4 semaines
Micro Windjammer - 30 uses
Délai habituel entre 4 et 5 semaines
Foam Windshield/Windscreen for Opus 62, Opus 67, Opus 82, Opus 86, Opus 87, Opus 88, DT 280, DT 287, DT 290 and DT 297 - Charcoal Grey
30/55 Foam
Délai habituel entre 4 et 5 semaines
35/50 Foam
Délai habituel entre 4 et 5 semaines
Undercover Pack, 30 uses
Délai habituel entre 4 et 5 semaines
40/55 Foam
Délai habituel entre 4 et 5 semaines
Rode WS3 Windscreen is built to fit the NT3 microphone. Properly equip your microphone with the WS3 to avoid wind noise and pop.
Rode WS5 Windscreen is built to fit the NT5 and NT6 microphones. Properly equip your microphone with the WS5 to avoid wind noise and pop.
5 cm Standard Hole Foam
Délai habituel entre 4 et 5 semaines
Hot Shoe 3/8 Adapter
Délai habituel entre 4 et 5 semaines
SmallRig Windshield with Cold Shoe Adapter for Nikon Z 30 3859 is designed to eliminate wind noise for better sound quality in outdoor scenes thanks to the selected artificial wool and thick linings.
Délai habituel entre 4 et 5 semaines
5 cm Large Hole Foam
Délai habituel entre 4 et 5 semaines
Standard Windscreen for VT500/506 Series
Délai de livraison habituel 4 semaines
Protective grilles for MCE10, black
Windscreen foam ME 36
Windscreen for VT DUPLEX-CARDIOID
Délai de livraison habituel 4 semaines
HMD 46/ HME 27 - Windscreen
Windscreen large for HME 26
Wind- and pop screen for BKE 4-4
Windshield Accessory for Headmic 4 in Beige
Windshield Accessory for Headmic 4 in Black
Foam Windscreen for H1, H1n, H1n-VP
HMD 26 Small Foam mic Windscreen
WS800 Windscreen WS800B Black or WS800H Beige
Délai de livraison habituel 4 semaines
W720 Windscreen to VT720W
Délai de livraison habituel 4 semaines
Windscreen for VT910
Délai de livraison habituel 4 semaines
Foam Windshield For XS Lavalier Microphones
Windscreen for VT701/VT901
Délai de livraison habituel 4 semaines