Aucun produit
Commander
Tous les fabricants ABC AJA Allen Avionics Alphatron Amberfin Angenieux Anton-Bauer Arri Astro Athletic ATOMOS Autocue Beachtek BlackMagic Design Bluebell Opticom Blueshape Boxx Broadcast Pix C-Motion CamRade Canon Canopus Century-Optics Chrosziel Cinedeck Cineroid Comer Convergent Design Datavideo Decimator Dedolight Digidolly Don Earl Doremi DSM DvTec Easyrig Formatt Fostex Fotonexport Fujinon G-Technolgy Genus Harris Honda Hoodman Humble Monkey Productions Ianiro Image Engineering Induro Jvc K-Tek K5600 Kata KesslerCrane Kinoflo Koenig/Meyer KRK systems LAIGLE Litepanels LiveU MacBeth Mackie Manfrotto Marshall Matrox Matthews Miller Miranda Motu MovieTech MTF Muraro NewTek Optex Orad Osram PAG Panasonic Pelicase Philips Photoflex Playbox Poigneebleu PortaBrace PrompterPeople PSTechnik Putora RED Reflecmedia Rode Rorke Data Rycote Sachtler Safaritripod Samcam.tv Sandisk Sanken Sekonic Sennheiser Snell Sony SoundDevices SQN Swedish Chameleon Swit TECPRO Tiffen Triad TVOne Ultimatte Varizoom Vinten Visuals Vocas Voice-Technologies Vokkero Vsn Yamaha Zacuto Zeiss Zunow Zylight
Tous les nouveaux produits
Inscription Désinscription
Découvrez nos bureaux
Universal Camera Clamp Adapter Kit (K-CA). Converting the existing camera michropone clamp to a standard 3/8-16 thread.
Comparer
Shock Mount, Shoe Adapter
Short version shock Mount, Shoe Adapter
Dual Angle Shock Mount
Short Version Dual Angle Shock Mount
The K-GPS is a versatile high tech 4-point suspension system featuring K-Tekís unique K-SUS polymer suspenders.
The K-Tek K-OSE Off-Set Shoe Extender gives you about 3 of height off of the camera.
Shoe Adapter for DV Cameras.
The mic is held firmly in 2 specially formulated polymer mounts attached to percision machined aluminum arms, spaced 8cm apart. For shotgun mics 19 to 25mm (Diam). Can be used with windshields by adding the K-WA Windshield Adapter.
The mic is held firmly in 2 specially formulated polymer mounts attached to percision machined aluminum arms, spaced 5cm apart. For shotgun mics 19 to 25mm (Diam). Can be used with windshields by adding the K-WA Windshield Adapter.
Made from a special polymer the K-SUS Mic suspenders are a high quality replacement for rubber bands, or bands and clips in varoise suspension frames with a 4-point mounting pattern and accept any microphone with a diamter of 20-40 mm. Available in pairs.
This lightweight, versatile suspension system uses the K-Tek K-SUS polymer suspenders in a machined aluminum frame.
The SM3 is a suspension shock mount with Hot-Shoe adaptor for mounting the RÿDE NTG-1, NTG-2, NTG-3, NT3, NT4 & NT5 microphones on video cameras.
The SM5 is a suspension shock mount with ring clamp adaptor that allows the use of RÿDE Microphones to be used with high end video cameras. It supports camera clamp mounts that grip a 24 or 27mm barrel.
S300 Kit for mics. 200 to 255mm long
S330 Kit for mics. 260 to 280mm long
S375 Kit for mics. 285 to 325mm long
S450 Kit for mics. 355 to 410mm long
Windshield 1 (Body Length 170mm)
Windshield 2 (Body Length 210mm)
Windshield 3 (Body Length 260mm)
Windshield 4 (Body Length 330mm)
Mono Extended Ball Gag Windshield
Windshield 10 (Body Length 120mm - for Sennheiser MKH 8000 series)