product (empty)




Atomos ATOMNJFL1 - Ninja Flame

Packed Consisting of: Ninja Flame unit; Custom Red HPRC hard flight case; Control cable (2.5mm Female to 2 x 2.5mm Male); 2 x NP-F750 4-cell batteries; Fast battery charger; USB3 docking station; D-Tap battery eliminator; 5 x Master Caddy cases; 12V 3A AC-DC power adapter; HDR sun hood.

More details

Pack content

1 x Kingston SUV400S37/240G - 240 GB SSDNow UV400, TLC, SATA 6 Gb/s

240 GB Kingston SSDNow UV400, TLC, SATA 6 Gb/s, 550/490 MB/sec., MTTF 1M Std., 2.5"

1 199,00 CHF tax excl. 1 294,92 CHF tax incl.

Add to cart Contact us

The Atomos Ninja Flame is a 7", 1920 x 1200 on-camera recording monitor that combines 4K recording with a 10-bit FRC panel that supports native display of HDR (log) footage as well as high brightness viewing of Rec. 709 footage. It utilizes an HDMI input to support clean output signals at resolutions up to UHD 4K, recording it to 2.5" SSDs using 10-bit, 4:2:2 Apple ProRes and Avid DNxHR codecs.

The 10-bit panel and AtomHDR display technology support a brightness range of over 10 stops, allowing you to more accurately monitor your log gamma footage without having to view flat, washed-out looking images or use a LUT to compress the dynamic range and color space. The monitor offers built-in pre-sets to accurately translate popular log formats from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras. The settings only affect viewing, with recorded video remained unaltered.

In addition to HDR monitoring, the monitor also offers a High Bright mode for traditional Rec. 709 monitoring. This mode takes advantage of the full 1500 cd/m² brightness to allow for more confident monitoring in bright outdoor environments, even without a sun hood. In HDR mode, use of an included snap-on sun hood is required, as displaying a wider brightness range reduces the overall brightness of the monitor.

Built to withstand the rigors of production, the Ninja Flame features built-in protective armor that features silicone-covered corners and chamfered edges. Compared to the original Ninja, the Flame now features dual Sony L-Series battery plates that support battery hot-swapping, enabling longer run times. For audio recording, the monitor features a 3.5mm microphone input, with on-screen audio level display. Additionally, the monitor features a variety of onscreen exposure analysis, framing, and focus assist tools. Included with the monitor are two NP-F750 batteries, along with a fast charger, D-tap power cable, AC power adapter, control cable, USB 3.0 docking station, and five Master Caddy SSD/HDD cases. All items come packaged in a custom HPRC hard case.


- 1920 x 1200 resolution
- 10-bit FRC monitoring processing
- 1500 cd/m² brightness
- 4K HDMI input/output
- AtomHDR technology displays 10 stops of dynamic range to natively display HDR (log) footage
- Presets for viewing log gamma curves from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras
- High Bright mode for Rec. 709 viewing
- 4K UHD downscale for HD monitoring

- Supports custom 3D LUTs (.cube format)
- Anamorphic de-squeeze: 2x, 1.5x, 1.33x, Panasonic 8:3


- UHD 4K recording at 24/25/30 fps
- 1080p recording up to 120 fps
- 10-bit 4:2:2 ProRes and DNxHR recording to SSD/HDD media
- Pre-roll record (HD 8 seconds, 4K 2 seconds)
- Custom time-lapse mode
- 10 metadata fields

Additional Features

- 3.5mm microphone input
- Audio level meters and mic level adjustment
- Dual Sony L-Series battery slots support hot-swappable for continuous power
- Built-in armor with silicone-covered corners
- Snap-on sun hood
- Two NP-F750 batteries and fast charger included
- Custom HPRC hard case





7.1" (18 cm) IPS capacitive touchscreen


1920 x 1200
325 ppi

Bit Depth

10-bit (8-bit plus FRC)

Video Aspect Ratio

Native: 16:9


1500 cd/m²

LUT Support

3D LUT (.cube file format)




1 x HDMI (1.4b)
1 x 2.5 mm LANC
1 x 3.5 mm stereo mini-jack (Mic / Line)


1 x HDMI (1.4b) loop output
1 x 3.5 mm headphone jack


Supported Video Format

Supported Signal

Input: 10- / 8-bit 4:2:2 (dependent on video source)
Output: 10- / 8-bit 4:2:2 (dependent on video source)

Input/Output Resolutions

2160p 24/25/30 
1080p 24/25/30/50/60/120
1080i 50/60
720p 50/60

Encoding Formats

UHD 4K (3840 x 2160):
Apple ProRes HQ, 422, LT

1920 x 1080
Apple ProRes HQ, 422, LT
DNxHD 220x, 220, 145, 36

Pulldown Conversion

24/25/30psf to 24/25/30p (2:2 pulldown) 60i to 24p (3:2 pulldown)


Supported Audio Formats


2 or 8-channel, up to 24-bit (camera dependent)

Dynamic Range

> 90 dB

Signal Level

Maximum: +24 dBu


Maximum Analog Gain: +52 dB

Phantom Power

+48 V phantom power for XLR inputs


Remote Operation


Auto HDMI trigger
Supported Protocols: Canon, Sony, Atomos Open Standard


Supports slave configuration


Recording Media

Supported Media

2.5" SSD

HD High Frame Rate (50/60/120p):
2.5" SSD
2.5" HDD (7,200 rpm and up) for 1080p 50/60

HD (30p and less):
2.5" SSD
2.5" HDD (5,400 rpm and up)

Note: Only use media that has been approved by Atomos

Master Caddy Dock

Interface: 2.5" SATA to USB 2.0/3.0

Supported Applications

Final Cut Pro X/7+
Avid Media Composer 5.0+
Adobe Premiere 5.5+
Grass Valley EDIUS 6.0+
Sony Vegas Pro 10+
Autodesk Smoke 2015

XML Support

FCPX XML native, FCP7 supported with conversion (Adobe compatible)



Power Requirements

6.2 to 16.8 VDC (battery or DC power input)

Power Consumption

10 to 24 W

Supported Battery Types

2 x Sony L-series

Battery Life

5200 mAh: up to 1.5 hours (monitor and record 4K)
7800 mAh: up to 2.2 hours (monitor and record 4K)


ABS polycarbonate


8.4 x 5 x 1.8" (21.4 x 12.7 x 4.5 cm)


Without Batteries & Media: 1.4 lb (0.62 kg) 
With Batteries & Media: 2.3 lb (1.06 kg)


Pack content