Ready to work set, based on the second-generation ARRI digital encoder head, DEH-2. Including LBUS controllers, like the OCU-1 for focus and the Master Grip for zoom.
DEH-2 Pro Set, Left Zoom Rocker Master Grip, OCU-1
ARTEMIS 2, Volt Post, Basic Set. Includes: 1x K2.0041201; 1x K2.0039443; 1x K2.0039448; 1x K2.0010476; 1x K2.0040046; 1x K2.0038249; 1x K2.0036904; 1x K2.0040332; 1x K2.0039975; 1x K2.0037739; 1x K2.0037771; 1x K2.0041327; 1x K2.0040790; 1x K2.0037757; 3x K2.0039300; 1x O5.15642.0.
This set enables an artemis Gen.1 to be upgraded to an ARTEMIS 2. Includes: 1x K2.0041201; 1x K2.0039443; 1x K2.0039448; 1x K2.0010476; 1x K2.0038249; 1x K2.0040332; 1x K2.0039975; 1x K2.0037739; 1x K2.0037771; 1x K2.0041327; 1x K2.0040790; 1x K2.0037757; 3x K2.0039300.
The artemis carbon spring arms offer a lightweight and optimized state of the art design. The absolutely friction-free ball bearings placed in the extreme stiff and torsion-free carbon fibre bones guarantees a prompt and smooth reaction of the arm. Inckudes: 1x K2.0037435; 1x K2.0010434; 1x K2.0010435; 1x K2.0010463. Capacity: 30kg/66.1lb
The artemis carbon spring arms offer a lightweight and optimized state of the art design. The absolutely friction-free ball bearings placed in the extreme stiff and torsion-free carbon fibre bones guarantees a prompt and smooth reaction of the arm. Includes: 1x K2.0010332; 1x K2.0010435; 1x K2.0010463; 1x K2.0010434. Capacity: 26kg/57.3lb
This special carbon post is required to use the M2 Volt (trademark) Gimbal with ARTEMIS 2 and older artemis systems, like the Cine Broadcast and the EFP HD.
The artemis carbon spring arms offer a lightweight and optimized state of the art design. The absolutely friction-free ball bearings placed in the extreme stiff and torsion-free carbon fibre bones guarantees a prompt and smooth reaction of the arm. Includes: 1x K2.0010331; 1x K2.0010435; 1x K2.0010463; 1x K2.0010434. Capacity: 23kg/50.7lb
The ARRI Digital Encoder Head is the perfect and intuitive way to control the Stabilized Remote Head SRH-3 and SRH-360. The DEH-1 was specially manufactured according to ARRI specifications, such as special damping performance and adjustable pan bars.
The ARRI Digital Encoder Head is the perfect and intuitive way to control the Stabilized Remote Head SRH-3 and SRH-360. The DEH-1 was specially manufactured according to ARRI specifications, such as special damping performance and adjustable pan bars.
The artemis carbon spring arms offer a lightweight and optimized state of the art design. The absolutely friction-free ball bearings placed in the extreme stiff and torsion-free carbon fibre bones guarantees a prompt and smooth reaction of the arm. Includes: 1x K2.0010330; 1x K2.0010435; 1x K2.0010463; 1x K2.0010434. Capacity: 19kg/41.8lb
The ARRI Digital Encoder Head is the perfect and intuitive way to control the Stabilized Remote Head SRH-3 and SRH-360. The DEH-1 was specially manufactured according to ARRI specifications, such as special damping performance and adjustable pan bars.
The ARRI Digital Encoder Head is the perfect and intuitive way to control the Stabilized Remote Head SRH-3 and SRH-360. The DEH-1 was specially manufactured according to ARRI specifications, such as special damping performance and adjustable pan bars.
The ARRI Digital Remote Wheels are the most precise way to control the stabilized Remote Head SRH-3 and SRH-360.
The ARRI Digital Encoder Head is the perfect and intuitive way to control the Stabilized Remote Head SRH-3 and SRH-360.
The Battery Hanger Module Gen.2, BHM-2 is a future proof high-performance power supply for artemis and TRINITY camera stabilization systems. Regardless of the batteries used, whether 12V or 24V batteries, the BHM-2 always supplies 12V and 24V for the camera and the accessories used. If 12V batteries are used, 24V will be transformed from the 12V if 24V...
Set including a 7in Small HD 703 monitor and all needed adapters. ARTEMIS 2, artemis Gen.1. Includes: 1x K2.0041765; 1x K2.0042710; 1x K2.0010476; 1x K2.0041723. NOTE: To complete the initial order, it is recommended to order one of the monitor sets or monitor brackets.
The vibration isolator for the SRH remote head series combines excellent isolation from dynamic impulses, shocks and vibrations in an extremely compact and rigid design. Four polymer damping elements absorb unwanted vertical and angular movements in the roll and tilt axis but keep the pivot axis defined and stable. Includes: 1x K2.0041912; 1x K2.0041922;...
The vibration isolator for the SRH remote head series combines excellent isolation from dynamic impulses, shocks and vibrations in an extremely compact and rigid design. Four polymer damping elements absorb unwanted vertical and angular movements in the roll and tilt axis but keep the pivot axis defined and stable. Includes: 1x K2.0038752; 1x K2.0024106;...
High capacity power supply for the SRH-3 and SRH-360 stabilzed remote head. Continuous, regulated and stabilized power supply with a power of 600W ensures safe operation of the SRH-3 Stabilized Remote Head. includes: K2.0019299 1x, K2.0019303 1x SRH Power Supply Power and Data Cable, 12V/24V, 20m/65.6ft
Set including a 7in Transvideo Stargate monitor and all needed adapters. ARTEMIS 2, artemis Gen.1. Includes: 1x K2.0019438; 1x K2.0042711; 1x K2.0010476; 1x K2.0010546. NOTE: To complete the initial order, it is recommended to order one of the monitor sets or monitor brackets.
New LBUS based Micro Force joystick for TRINITY 2, with two joysticks and six freely assignable buttons. Two joysticks, six buttons. 1x K2.0041089; 1x K2.0044234; 1x K2.0043861; 1x K2.0038998; 1x K2.0038999. NOTE: To complete the initial order, at least one of the mandatory Joystick sets must be ordered.
Highly adjustable and modular vest. Only extreme comfortable and modern fabrics are used for the artemis vest. Fits any operator from 1.5 m up to 2 m. / 4.9 ft up to 6.56 ft. With standard industrial vest - arm connector
New LBUS based Micro Force joystick for TRINITY 2, with one joystick and three freely assignable buttons. One joystick, three buttons. 1x K2.0041091; 1x K2.0044234; 1x K2.0043861; 1x K2.0038998; 1x K2.0038999. NOTE: To complete the initial order, at least one of the mandatory Joystick sets must be ordered.
The Top Stage Gen. 2 combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism.
The Top Stage Gen. 2 combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism.
The Digital Encoder Pedals using LBUS to be easiliy integrated in the SRH-3 and SRH-360 workflows. The Digital Encoder Pedals are the most precise way to control the stabilized Remote Head SRH-3 and SRH-360. Inclueds: K2.0039147 1x DEP-1, Host Pedal; K2.0039149 1x DEP-1, Client Pedal; K2.0001637 1x Cable RS - RS/PWR IN (0.5m/1.6ft)
Set of digital high-resolution controllers to control focus through a focus wheel and zoom through a zoom rocker based on the LBUS protocol. This allows to control focus and zoom via the LBUS with force mini motors, or through the LCUBE CUB-2. Both controllers can als be freely assigned to other functions, like iris, roll-axis, ect.
Additional third wheel set for the DRW-1 Digital remote Wheels, Two Wheels Set KK.0021212 includes: K2.0019319 1x DRW-1 Module, N2.25004.A 1x Hand Wheel 150 complete, K2.0006751 1x Cable LBUS - LBUS (0.5m/1.5ft)
The Bottom Stage Gen. 2 combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism.
The Bottom Stage Gen. 2 combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism.
artemis Gimbal for the 1.8'' artemis center post / super low friction / patented self centering design / no-tool gimbal clamp. Only for artemis Cine and EFP systems with 1.8'' center post
Single replacement 900 MHz ERM module. Note: Only for ERM-900 for SRH
Easyrig 3 Cinema support bar 750N with extended arm +230mm/9in
K2.0038704 1x RAT-1, Radio Adapter TRINITY Gen.2; K2.0036598 2x RF-2400 Radio Module 2400 MHz FHSS; K2.0033763 2x ERM-2400 Rubber Duck Antenna
Analog Joystick for TRINITY 2. Includes: K2.0010287 1x TRINITY Joystick Monitor Mount. NOTE: To complete the initial order, at least one of the mandatory Joystick sets must be ordered.
The new Super Post, 1.8 "Gen. 2 is an replacement center post for the. Standard center post which comes with the system. The new Super Post enables the camera in the artemis and TRINITY. Application to be placed and moved significantly higher or lower in the set. Diameter 1.8in / Inner post 1.5in. Max. length 199,8cm / 6.55ft. Min. length: 119cm / 3,9ft....
The new Super Post, 1.8 "Gen. 2 is an replacement center post for the. Standard center post which comes with the system. The new Super Post enables the camera in the artemis and TRINITY. Application to be placed and moved significantly higher or lower in the set. Diameter 1.8in / Inner post 1.5in. Max. length 199,8cm / 6.55ft. Min. length: 119cm / 3,9ft....
3 cinema 200N - 850N Adjustable arm 130mm - 5.11in
The Steadicam AERO Sled supports camera setups up to 20 lb.It also features 2-section carbon fiber post extendable from 22.5 to 35.5". In addition, it comes with an Anton-Bauer battery mount.
The Steadicam AERO Sled supports camera setups up to 20 lb.It also features 2-section carbon fiber post extendable from 22.5 to 35.5". In addition, it comes with an V-Lock battery mount.
Single replacement 2,4 GHz ERM module. Note: Only for ERM-2400 for SRH
Single replacement 2,4 GHz ERM module. Note: Only for ERM-2400 for LCS
artemis telescopic centre post / diameter 1.8'' diameter / carbon fibre / no-tool clamp / torsion-free guided inner post / length fine trim. Length 43 cm - 72 cm / 16.9'' - 28.3''. For all artemis systems
2.5 200N - 600N Adjustable arm 230mm - 9.05in
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the battery.
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the battery.
Artemis carbon fibre telescopic centre post, diameter 1.8in, no-tool clamp, torsion-free guided diameter 1.5in inner post, fine trim adjustment. Length from 37cm / 14,56in to 46,5cm / 18,30in. Note: For all artemis and TRINITY systems
2.5 200N - 600N Adjustable arm 130mm - 5.11in
The SRH Modular Low Mount Rack enables the SRH-stabilized remote control head to be positioned very low. The modular design also allows the use of the SRH-stabilized remote control on the hood of a car or even filming inside a car. Freely positionable tripod legs with independent height adjustment offer maximum flexibility.
Thumb control for the tilt axes of the TRINITY. Including: K2.0014805 / Joystick Main Cable; K2.0014801 / Monitor Power Cable / ARRI Starlight / 5pin; K2.0014803 / Monitor Power Cable / Starlight / 2pin. For all TRINITY systems
Complete spring set made off two spring sets, one for each arm segment. Capacity: 30kg/66Ib For all artemis spring arms
Set including Small HD Cine 5 monitor and the new articulating arm with a 19mm clamp adapter for the MGT-2. K0.0044362 & K0.0044363)
The Microforce Joystick is a high-resolution 2-axis controller for the SRH remote control. The microforce joystick offers a highly precise and tactile optimized control of the pan and tilt axis of the remote head. The controller can be installed by the operator himself, no additional service is required. For SRH-3 and SRH-360 remote control panel.
Complete spring set made off one spring set for each arm segment. Capacity: 26 kg / 57.3 lb. For all artemis spring arms
Complete spring set made off two spring sets, one for each arm segment. Capacity: 23kg/50.7lb For all artemis spring arms
The digital focus wheel is an additional high-resolution digital controller for the SRH remote control panel.
5in Transvideo Starlite Monitor Set, TRINITY 2
Includes: K2.0010336 1x Top Holder for Maxima; K2.0010425 1x Spider for Maxima
Easyrig Minimax with Cinema Flex vest, complete with bag, MMCF101 Small size, MMCF102 Std. Size
Easyrig STABIL G3 dampening & foldable arm w/ locking lever & hanger, 5-25 kg/11-55 lbs
Easyrig 3 Cinema support bar 600N with extended arm +230mm/9in
Easyrig 3 Cinema support bar 500N with extended arm +230mm/9in
Easyrig 3 Cinema support bar 400N with extended arm +230mm/9in
Easyrig 3 Cinema support bar 300N with extended arm +230mm/9in
Hydra Predator Shock Absorbing Arm - Gold Mount
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Predator Shock Absorbing Arm - V Mount
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
SAM standard-compatible QuickLock plate for broadcast cameras with V-mount locking mechanism.
10" Suction Cup Set for Hydra Arm Mini
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Easyrig 3 Cinema support bar 300N with extended arm +130mm/5in
Easyrig 3 Cinema support bar 400N with extended arm +130mm/5in
Easyrig 3 Cinema support bar 500N with extended arm +130mm/5in
Easyrig 3 Cinema support bar 600N with extended arm +130mm/5in
Easyrig 3 Cinema support bar 750N with extended arm +130mm/5in
Standard fully digital high-resolution 2-axis joystick for the SRH remote control. The standard joystick offers a highly precise and tactile optimized control of the pan and tilt axis of the remote head. The controller can be installed by the operator himself, no additional service is required. For SRH-3 and SRH-360
The Broadcast Joystick is a high-resolution 3-axis controller for the SRH remote control. The Broadcast joystick offers a highly precise and tactile optimized control of the pan and tilt axis of the remote head. The third axis can be used to control Zoom or the control the roll-axis. The controller can be installed by the operator himself, no additional...
The Pendulum TPD-2 is one of the most important components of the TRINITY system with its inconspicuous mode of operation. You could also call it the drop-down generator of the TRINITY system. In the minimum configuration, the pendulum has a mass of approx. 700gr / 1.54lb, which is attached to the rotating pendulum arm. Because of gravity, this mass is...
Steadicam Hard Mount Kit
10" Plus 6" Suction Cup Set for Hydra Arm Mini
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Additional standard joystick module for the SRH remote control. The standard joystick is mounted on the left side of the SRH remote control. The controller can be installed by the operator himself, no additional service is required.
The digital zoom rocker is an additional high-resolution digital controller for the SRH remote control panel. In general, it is used to control zoom via the LBUS with force mini motors, or through the LCUBE CUB-2. But it can also be freely assigned to other functions such as roll axis, etc. The controller can be installed by the operator himself, no...
The improved monitor mount Gen.2 offers a larger distance between the rods, so that it can be fixed better and more compactly on the carriage or under table. The improved rod clamp and the finer ARRI rosette guarantee that the monitor is held firmly and rigidly. The new universal post clamp fits both the 1.5" inner post and the 1.8" outer post. SmallHD...
The ARTEMIS Monitor Bracket Gen. 2 supports a TVLogic F-7H MK2 7" monitor on your ARRI stabilizer rig. The expanded distance between the rods provides a more solid, compact mount, and the improved rod clamp and finer ARRI rosette support the monitor firmly.
The improved monitor mount Gen.2 offers a larger distance between the rods, so that it can be fixed better and more compactly on the carriage or under table. The improved rod clamp and the finer ARRI rosette guarantee that the monitor is held firmly and rigidly. The new universal post clamp fits both the 1.5" inner post and the 1.8" outer post. Transvideo...
Docking Bracket for artemis systems using the 1.8'' post and the wide docking ring (2.5''). Fits C-Stands with 5/8'' / 15.8 mm spigot. For artemis Cine Broadcast 1.8'', EFP HD 1.8", EFP HD 1.5" and TRINITY Rigs
The Pendulum TPD-2 is one of the most important components of the TRINITY system with its inconspicuous mode of operation. You could also call it the drop-down generator of the TRINITY system. In the minimum configuration, the pendulum has a mass of approx. 700gr / 1.54lb, which is attached to the rotating pendulum arm. Because of gravity, this mass is...
The improved monitor mount Gen.2 offers a larger distance between the rods, so that it can be fixed better and more compactly on the carriage or under table. The improved rod clamp and the finer ARRI rosette guarantee that the monitor is held firmly and rigidly. The new universal post clamp fits both the 1.5" inner post and the 1.8" outer post. 8in...
Cinema 3 Gimbalrig complete support bar 1000N
Easyrig 3 Cinema support bar 300N
Easyrig 3 Cinema support bar 400N
Easyrig 3 Cinema support bar 500N
Easyrig 3 Cinema support bar 600N
Easyrig 3 Cinema support bar 750N
Extra heavy dovetail plate made of steel to achieve a better overall balance with top-heavy camera setups. For SRH-3, SRH-360, TRINITY. Length 450mm / 17,72inch. Weight: 1,4k Kg / 3.08 lb
The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Includes: 1x K2.0038537; 1x K2.0038536; 1x K2.0039089; 1x K2.0038783.
The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Includes: 1x K2.0038618; 1x K2.0039089; 1x K2.0038536; 1x K2.0038783.
Mounting Bracket to use the MAXIMA QL with Spring Arms using the standard 5/8in arm post. With the optional Euro and Mitchell mounts, the Spider can be used on dollies and cranes Optional Euro mount (K2.0010426) and Mitchell mount (K2.0010427) For MAXIMA QL only
Additional Rod Support Bracket for the top of the SRH, which allows to mount 15mm rods. The Rod Support Bracket can also be mounted to the front of the basic CSS dovetail plates. (K2.0033425, K2.0019294 and K2.0019295)
Bidirectional 2,4 GHz Diversity wireless control for Tilt - Pan - Roll. 1,5'' OLED display for status and profile information. Range up to 250 meter / 820 ft. For TRINITY and MAXIMA
Extremely thin and flexible hybrid fiber/copper cable that carries image data, control data and power. Connects ALEXA M or ALEXA XT M head and body for Steadicam use.
The new generation of the Tally system is now fully digital. This guarantees constant luminosity in the host and client modules, regardless of whether the tally LED on the camera is bright. The set includes the Tally host and client module as well as all required cables.
Extra heavy dovetail plate made of steel to achieve a better overall balance with top-heavy camera setups. For SRH-3, SRH-360, TRINITY. Length 315mm / 12.4inch. Weight: 0,94 kg / 2.07 lb
The new generation of the Tally system is now fully digital. This guarantees constant luminosity in the host and client modules, regardless of whether the tally LED on the camera is bright. The set includes the Tally host and client module as well as all required cables.
The Dovetail Utility Base DUB-1 allows camera rigs using ARRI CSS standard dovetails (QL-plates, SAM plates, Stabilizer Plate for CBP...) to mount to any touch and Go 35 support for camera prep or quick switch from ARRI CSS to fluid heads. The DUB-1 features a 20mm rise to leave room for lens motor brackets and cables
Easyrig STABIL Light dampening & foldable arm, supports 2-7 kg/4.4-15.4 lbs
The new generation of the Tally system is now fully digital. This guarantees constant luminosity in the host and client modules, regardless of whether the tally LED on the camera is bright. The set includes the Tally host and client module as well as all required cables.
Advanced Ring Grip for RS 2 Travel Kit
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Tally Gen.2 Set for artemis Gen.1, 3pin Lemo
12V/24V High Capacity battery power cable set to connect a 12V/24V block battery to the SRH-3 and SRH-360. includes: K2.0019306 1x SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft, K2.0021429 1x SRH High Capacity Battery Power Cable 24V, 3pin XLR, 20m/66ft, K2.0021430 1x SRH High Capacity Battery Power Cable 12V, 4pin XLR, 20m/66ftft, For SRH-3...
The Multi Support Plate MSP-1 for the TRINITY allows to use the TRINITY head as a standalone handheld two axis fully stabilized gimbal. The MSP-1 includes Rosettes which enables the operator to use the Master Grips to steer the TRINITY and to control the camera and lens. The Euro Mount K2.0010426 and Mitchell Mount K2.0010427 can be used with the MSP-1.
Rear Seat Monitor Mounting Bracket Pro
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Adapter Plate to mount the SRH remote control panel on a tripod quick release plate. For SRH-3 and SRH-360
Modular center post extension to extent the 1.8in artemis center post by 21,6cm / 8.5in. Diameter 1.8in, length 21,6cm / 8.5in. Lemo 3B 16 pin. NOTE: Only for ARTEMIS 2 and TRINITY 2
Advanced Ring Grip for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 3B connectors and internal main cable wiring diameter 1.8in, length 8.5in/216 mm
Support bar upper extended 230mm/9in (complete down to the straight support bar)
Support bar upper extended 230mm/9in (complete down to the Power pack)
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ? 19mm designed to support lens motors driving Ultra primes and Master Prime lenses. Includes: K2.0014215 1x Stabilizer Adapter Mount SAM-2 for ALEXA Mini, K2.0006186 1x Rod Mounting Bracket RMB-3, K2.0014960 1x Single Support Rod 90mm, 3.5in, diameter19mm,...
Special Mitchell Mount to mount the SRH-3 and SRH-360 stabilized remote head into heads and dampers with in higth restricted clearance.
Stabilizer Adapter Mount SAM-3 for AMIRA with a rod mounting bracket and two single rods ? 19mm designed to support lens motors driving Ultra primes and Master Prime lenses. Includes: K2.0014630 1x Stabilizer Adapter Mount SAM-3 for AMIRA, K2.0006186 1x Rod Mounting Bracket RMB-3, K2.0014960 1x Single Support Rod 90mm, 3.5in, diameter19mm, K2.0014961 1x...
12V/24V High Capacity battery power cable set to connect a 12V/24V block battery to the SRH-3. 10m/33ft includes: K2.0019306 1x SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft, K2.0021427 1x SRH High Capacity Battery Power Cable 24V, 3pin XLR, 10m/33ft, K2.0021428 1x SRH High Capacity Battery Power Cable 12V, 4pin XLR, 10m/33ft, For SRH-3 and...
Side Bracket Upgrade, 6in, TVlogic F-7H mk2
The Speed Rail Mounting Suction Cup Kit from Tilta is a set of four high-capacity cups, each designed with sturdy aluminum, stainless steel, and rubber to sustain payloads up to 110 lb. These work perfectly with the Tilta Speed Rail Car Mounting Kit but are compatible with any 50mm speed rail.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Support bar upper extended 130mm/5in (complete down to the straight support bar)
Support bar upper extended 130mm/5in (complete down to the Power pack)
Top Holder to mount the MAXIMA QL on cranes, Jib arms and rigs. Note: The Euro Mount K2.0010426 and Mitchell Mount K2.0010427 can be used with the Top Holder.
Swinging adjustment arm, complete with axle and wheels
Remote Control Kit for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
The Pivoting Yoke upgrade allows the 1.8 Docking Bracket to lean by 30 degrees in both directions. So you can tilt the artemis rig plus / minus degrees while parked in the Docking Bracket. Note: Only for the 1.8"" Docking Bracket
Upgrade kit that allows the SmallHD 703 Monitor to be mounted in existing 6in and 8in artemis monitor brackets. SmallHD 703. 6in and 8in artemis monitor brackets
Upgrade kit that allows the Transvideo Stargate Monitor to be mounted in existing 6in and 8in artemis monitor brackets. Transvideo Stargate. 6in and 8in artemis monitor brackets
New and extremely flexible battery mounting system for ARTEMIS 2 and TRINITY 2. B-Mount. K2.0040284 3x B-Mount for BMS-2. NOTE: To complete the initial order, at least one of the mandatory battery mounting sets must be ordered.
New and extremely flexible battery mounting system for ARTEMIS 2 and TRINITY 2. Gold Mount. K2.0040285 3x Gold Mount for BMS-1 / BMS-2. NOTE: To complete the initial order, at least one of the mandatory battery mounting sets must be ordered.
New and extremely flexible battery mounting system for ARTEMIS 2 and TRINITY 2. V-Mount. K2.0040286 3x V-Mount for BMS-1 / BMS-2. NOTE: To complete the initial order, at least one of the mandatory battery mounting sets must be ordered.
The TAB-1 helps stabilizing the camera rigs in some configurations with ARRI CSS. The TAB-1 links top-mounted 15mm LWS camera rods to the top of CSS products such as SRH-3 360 and Trinity.
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fitted with a standard 60mm dovetail.
Small Bracket which allows to add additional brackets and mounts at the top center of the inner ring of the SRH stabilized remote head. For SRH-3 and SRH-360
Mounting Bracket for the TRINITY 2 head to addapt the RF-2400 Radio Module 2400 MHz FHSS Set (KK.0039984). The two rubber duck antennas enable easy use in the TRINITY 2 head. Includes: K2.0038704 1x RAT-1, Radio Adapter TRINITY 2, K2.0033763 2x ERM-2400 Rubber Duck Antenna For TRINITY 2
Power and data cable to power the SRH-3 and SRH360 stabilized remote head from the 600W SRH Power Supply K0.0019478 with 12V and 24V. 12V/24V high capacity camera power, plus FS CAN bus. Length: 20m/65.6ft, For SRH-3 and SRH-360
The Battery Mounting System generation 2, contains two key components: The Battery Mounting Base which is available as BMS-2 for Artemis and TRINITY generation 2, as also as BMS-1 for TRINITY generation 1.
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted with a standard 60mm dovetail.
The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to transit rapidly between fluid heads to stabilizer units from ARRI CSS. SAM-4 can be sandwiched to classic stabilizer plates, such as GPI Pro, etc.
Steadicam Docking Bracket
Electronic Suction Cup Control Kit
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
With the CSS Euro Mount, the MAXIMA QL equipped with the Spider (K2.0010425) can be attached to Dollies and Cranes, using the Euro Mount.
The Speed Rail Mounting Clamp Set from Tilta features four adjustable clamps designed to accommodate multiple configurations when using the 50mm speed rails of the Speed Rail Car Mounting Kit. This sturdy aluminum and stainless steel quick-assembly set simplifies the mounting process and can also be used to build larger rigs when used with optional Speed...
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Monitor Bracket extension retrofit kit, 8in
Reinforced dovetail plate for SRH-3, SRH-360, TRINITY, MAXIMA Length 450mm / 17.7in. Weight: 457gr / 16oz
The Stabilizer Plate for CBP 450mm/18in is a long support plate designed to support ALEXA Mini/Mini LF and longer cinema optics, such as Signature Zooms, on ARRI CSS products.
Heavy Duty Stand for Steadicam with 16mm spigot.
Monitor Bracket extension retrofit kit, 6in
Designed by Mike Johnson in the US, the Top Point Kit adds stability to all stabilizer rigs requiring good resistance to vibrations and flex. The kit is not limited to ARRI CSS but fits particularly well the remote head SRH-360.
The Stabilizer Adapter Mount SAM-6 450 mm/18 in. is a long, low-profile sliding dove tail plate that connects the ALEXA 35 to ARRI CSS products such as SRH-3/360 and supports long camera builds.
Super Post main cable for ARTEMIS 2 and TRINITY 2. High capacity 12V/24V, 2 x 12G Video, LBUS, Can Bus, Tally. Lemo 3B 16pin to Lemo 3B 16pin. ARTEMIS 2 and TRINITY 2 only!
Super Post main cable for artemis and TRINITY Gen1. High capacity 12V/24V, 2x 4G Video, Tally. Lemo 3B 10pin to Lemo 3B 10pin. For artemis Cine and TRINITY Gen.1 only!
Flexible standard main cable to connect the outer ring of the TRINITY 2 to the inner ring. High capacity 12V/24V, Data, 1 x 12G Video, LBUS, Can Bus, Tally, 0,56m/22in. TRINITY 2 only
To connect the SRH-3 Remote Control Panel to the SRH Remote Head or to the External Radio Modules K2.0033757 ERM-2400 (2.4GHz) and K2.0033758 ERM-900 (900 MHz). FS CAN Bus & 12V, Length: 25m/82ft, For SRH-3, SRH-360, ERM SRH, ERM LCS
Spare SRH Mitchell Mount Collar for the SRH stabilized remote head. Length: 40mm / 1.57in Note: Metric thread, For SRH-3 and SRH-360
Longer SRH Mitchell Mount Collar for the SRH stabilized remote head. Very useful for special cranes. Length: 45mm / 1.77in. Note: Metric thread. For SRH-3 and SRH-360
Spare ERM Power Cable for ERM-2400 & ERM-900, Length: 30 cm/11.8 in
Basic Ring Grip Plus for DJI Ronin Control Travel Kit
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Clamp bracket to lock the pan axis of the MAXIMA. For MAXIMA only
The set contains a 4-pin XLR power cable and a Gold Mount battery holder that can be mounted on the rods of the DRW-1 base plate. K2.0024168 1x SRH Battery Mount for Remote Control Panel, Gold-Mount, K2.0021422 1x 12V Battery Power Cable, D-Tab, 4pin XLR, 1,5m/5ft. For SRH-3 and SRH-360
The set contains a 4-pin XLR power cable and a V-Mount battery holder that can be mounted on the rods of the DRW-1 base plate. K2.0024167 1x SRH Battery Mount for Remote Control Panel, V-Mount, K2.0021422 1x 12V Battery Power Cable, D-Tab, 4pin XLR, 1,5m/5ft. For SRH-3 and SRH-360
The Stabilizer System Bracket SSB-2 15mm studio is a adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e.g. LS-9, LS-10 as well as matte boxes, rain deflectors, ring lights and other accessories that require centering on studio rod supports.
The Stabilizer System Bracket SSB-2 19mm studio is a adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e.g. LS-9, LS-10 as well as matte boxes, rain deflectors, ring lights and other accessories that require centering on studio rod supports.
The side-to-side fine adjustment upgrade for TRINITY Gen. 1 can only be performed in conjunction with the DUB-3 (K2.0040347).
Power cable to power the SRH-3 and SRH-360 stabilized remote head with 12V and 24V power from high capacity battery providing 12V and 24V power 12V 4pin XLR and 24V 3pin XLR , 0,5m/1.64ft For SRH-3 and SRH-360
Small sides feet, which can be attached laterally to the rosettes of the SRH remote control panel. For SRH-3 and SRH-360
As the foundation for custom-build speed rail rigs, this Tilta Speed Rail Set features six pieces of 50mm speed rail in two different sizes designed to support multiple configurations for various shock-absorbing arms.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
TRINITY Joystick Main Cable including the BNC-SMB Cable. 8 pin Lemo 1B to 7 pin Lemo 0B
The newly developed 19 mm hinge allows even more precise positioning of the batteries thanks to the finer ARRI rosette. And as soon as the hinge is locked, the batteries are held securely and without any play or vibrations. It is also possible to use two hinges on the ARTEMIS 2 and TRINTY 2. This allows the batteries to be positioned even more freely and...
Shock absorber complete 900N
Shock absorber complete 1200N
Shock absorber complete 1000N
Shock Absorbing Head for Hydra Arm Mini
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Mini joystick control which can be mounted at the frame of the MAXIMA right above the rubber handle. For Tilt and Pan. Note: Roll have to be done with the wireless remote control K2.0010337. For MAXIMA
Analog joystick cable to connect the analog TRINITY Gen.1 Joystick with TRINITY 2. Lemo 1B 8pin to Lemo 0B 7pin, no video. TRINITY 2 only
Support bar upper std. (complete down to the straight support bar)
Support bar upper Std. (complete down to the Power pack)
Longer and more flexible main cable to connect the outer ring of the TRINITY 2 to the inner ring. Data, 1 x 12G Video, LBUS, Can Bus, 0,65m/26in. TRINITY 2 only
To connect the SRH-3 Remote Control Panel to the SRH Remote Head or to the External Radio Modules K2.0033757 ERM-2400 (2.4GHz) and K2.0033758 ERM-900 (900 MHz). FS CAN Bus & 12V, Length: 10m/32.8ft, For SRH-3, SRH-360, ERM SRH, ERM LCS
The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8in and the 1.5in center post.The Delrin adapters make it possible to mount the counterweight on both the outer 1.8in post and the 1.5in telescoping inner post. The Counterweight is made of stainless steel.
The Basic Ring Grip Plus for DJI Ronin from TILTA is specifically designed to work with the DJI RS2, RS3, and RS3 Pro, providing a comfortable and dynamic two-handed support system. The compact and cable-free design is made of a magnesium and aluminum alloy, making it slightly lighter than its predecessor model but with improved durability.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Extension cable to connect the SRH remote control panel and the SRH remote head.
Universal wrench for the SRH Castle Nut / Mitchell Mount
Upgrade the first Gen. of the STABIL am to G2, contains: 2 side plates upper
The Stabilizer Adapter Mount SAM-8 is a low-profile sliding dove tail plate that connects the ALEXA 35 to Tiffen Steadicam products, such as M1 and M2.
Main cable for ARTEMIS 2 and TRINITY 2. High capacity 12V/24V, Data, 2 x 12G Video, LBUS, Can Bus, Tally. Lemo 3B 16pin to Lemo 3B 16pin. ARTEMIS 2 and TRINITY 2 only!
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the...
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the...
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the...
Reinforced dovetail plate for SRH-3, SRH-360, TRINITY, MAXIMA. Length: 31,5cm, 12,4in, Weight: 250gr / 6.7oz
1000N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M8
1200N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M8
200N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
300N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
400N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
500N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
600N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
750N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
900N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M8
Complete pivotal middle tube unit out of steel, length 300mm/11.8in
Redesigned and improved post clamp that clamps onto the 1.5" inner post and directly onto the 1.8" outer post with an insert. The use of now two bolts holding the Rossette block ensures maximum rigidity. NOTE: Sachtler rosette
Redesigned and improved post clamp that clamps onto the 1.5" inner post and directly onto the 1.8" outer post with an insert. The use of now two bolts holding the Rossette block ensures maximum rigidity. NOTE: ARRI Rossette
Newly developed Rain Cover for SRH-3 and SRH-360. Due to the flexible materials, the rain cover adapts perfectly to the shape of the remote head. The padded outside of the Rain Cover offers extra protection. NOTE: The set includes two different pan axis covers for the SRH-3 and SRH-360.
To speed up the assembly of the stabilized remote head to the BLACK ARM by Flowcine, a second SRH Castle Nut should already be permanently placed in the mount of the BLACK ARM. To do so, a second SRH Castle Nut is needed. Having a spare castle nut is always advisable, in case the original SRH-3 castle nut goes missing. Note: Imperial thread. For SRH-3 and...
To connect the SRH-3 Remote Control Panel to the SRH Remote Head or to the External Radio Modules K2.0033757 ERM-2400 (2.4GHz) and K2.0033758 ERM-900 (900 MHz). FS CAN Bus & 12V, Length: 1m / 3.2ft, For SRH-3, SRH-360, ERM SRH, ERM LCS
Shock absorber complete 300N
Shock absorber complete 400N
Shock absorber complete 500N
Shock absorber complete 600N
Shock absorber complete 750N
Shock absorber complete 200N
Basic Ring Grip Plus for DJI Ronin Travel Kit
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Reinforced dovetail plate for SRH-3, SRH-360, TRINITY, MAXIMA. Length: 200mm, 7,87in, Weight: 190gr / 6.70oz
To speed up the assembly of the SRH stabilized remote head to the BLACK ARM by Flowcine, a second SRH Castle Nut should already be permanently placed in the mount of the BLACK ARM.
The Compact Lens Support CLS-1 fits directly to the front groove of the Stabilizer Plate for CBP 450mm/18in and 355mm/14in to supports heavier prime lenses and smaller zooms such as the Signature Zoom 16-32mm. With lenses with support height reach under the level of the stabilizer mount, The Stabilizer Systems Bracket SSB-2 19mm or 15mm is advised.
Bellow block complete unit
Additional cheese plate which can be mounted to the right side at the top of the MAXIMA. The mounting plate many offers 3/8'' threads. Length: 12,7 cm Width: 9,2 cm / Length: 5'' Width: 3.62''. For MAXIMA only
Coupler to extend SRH FS CAN Bus Cables like: K2.0033762 SRH FS CAN Bus Cable, 1m/3.2ft, K2.0019302 SRH FS CAN Bus Cable, 10m/32.8ft, K2.0019301 SRH FS CAN Bus Cable, 25m/82 ft, FS CAN Bus & 12V, Length: 0.2m/0.65ft, For SRH-3 and SRH-360
Includes arm posts diameter 15.8 mm (5/8'') - length 76 mm (3'') and 300 mm (12''). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Includes arm posts diameter 15.8 mm (5/8'') - length 76 mm (3'') - 254 mm (10''). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI Trinity and MAXIMA system. The SAM-1 is also compatible with third-party stabilizer systems fitted with a standard 60 mm dovetail
Cheese plate like accessory mounting bracket which allows to add additional accessories, like transmitters to the right side of the SRH stabilized remote head. For SRH-3 and SRH-360
Wheel set (with 3 wheels) for HD SteadiStand with lock
Steadicam Docking Bracket With Baby Reciver
Wind Net Mobile Kit 4'(120cm) X'6(180cm)
The set consists of two different counterweights. The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each. The larger counterweight is equivalent to the weight of a cforce mini motor. Thus, the counterwight are perfect for getting difficult camera setups into perfect balance.
The Stabilizer Adapter Mount SAM-6 is a low-profile sliding dove tail plate that connects the ALEXA 35 to ARRI CSS products, such as ARRI TRINITY and SRH-3/360
The Stabilizer Adapter Mount SAM-7 is a low-profile sliding dove tail that connects the ALEXA 35 to ARRI Artemis and GPi PRO Stabilizers.
The Stabilizer Adapter Mount SAM-9 is a low-profile sliding dove tail that connects the ALEXA 35 to DJI Ronin 2.
The Basic Ring Grip Plus for DJI Ronin from TILTA is specifically designed to work with the DJI RS2, RS3, and RS3 Pro, providing a comfortable and dynamic two-handed support system. The compact and cable-free design is made of a magnesium and aluminum alloy, making it slightly lighter than its predecessor model but with improved durability.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Case for Sprinter trackwheelset curve
Easyrig STABIL spring assembly
Easyrig STABIL G3 spring assembly
Easyrig STABIL Light spring assembly
24V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306) 24V High Capacity, 3pin XLR, Length: 20m/66ft For SRH-3 and SRH-360
12V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306) 12V High Capacity, 4pin XLR, Length: 20m/66ft For SRH-3 and SRH-360
Additional counterweight for the TRINITY Gen.1. The bracket is mounted at the bottom of the outer ring of the TRINITY Gen.1 and allows 25, 50, 75 grams of extra weight to be attached. This additional counterweight gives the TRINITY Gen. 1 a much better "drop down" behavior when the TRINITY is in the horizontal plane.
RS 2 Remote Control Handle for Advanced Ring Grip
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Wind Net Mobile Kit 3'(90cm)x4'(120cm)
Power cable for the Transvideo Starlite monitor used with the TRINITY 2 pin Lemo 0B straight plug. TRINITY Backup Cable
Power and data cable to connect the RCP-3 remote control to the TRINITY2 system. Fischer 4pin to Fischer 4pin, 25cm/10in. TRINITY 2, RCP-3
24V high capacity camera power cable. Lemo 2B 7pin to Fischer 2pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
Upper support bar including adjustable block
The Speed Rail Mounting Suction Cup from Tilta is a high-capacity suction cup designed with sturdy aluminum, stainless steel, and rubber to sustain payloads up to 110 lb. It works perfectly with the Tilta Speed Rail Car Mounting Kit but is compatible with any 50mm speed rail.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
12V HiCap camera power cable / Lemo 1B 4pin -> Lemo 1B 6pin / for Red Epic. 12 Volt / High Capacity
Adapter cable to connect the ERM LCS to the WCU-4, SXU-1 UMC-4 and ALEXA Plus camera via the LCS socket. Recommended and required optional extension cables: SRH FS CAN Bus Cable, 1m/3.2ft K2.0033762, SRH FS CAN Bus Cable, 10m/32.8ft K2.0019302, SRH FS CAN Bus Cable, 25m/82ft K2.0019301
Adapter cable to connect the ERM LCS to ALEXA Mini, ALEXA Mini LF and Amira via the EXT. socket.
The Stabilizer Adapter Mount SAM-5 is a low-profile sliding dove tail plate that connects the ALEXA 35 to a M?VI Pro or M?VI M15.
Complete power pack, (Orange and black housing) supports 2-7 kg / 4.4-15.32 lbs
12 V high-capacity power cable to connect the TRINITY Battery Hanger Gen.1 with the ARTEMIS EFP Top Stage. Lemo 1B 4-pin to 2B 6-pin
Clamping bridge that can be clamped onto the rods of the battery hanger of TRINITY 2 as well as TRINITY Gen.1 and artemis Gen.1. TRINITY 2, TRINITY Gen.1, artemis Gen.1
Extension cable to connect the SRH remote control panel and the SRH remote head. Extension cable to connect the ERM-2400 (2.4GHz) K2.0033757 and ERM-900 (900 MHz) K2.0033758 to the SRH remote control panel and remote head. Extension cable to connect the ERM-LCS to the WCU-4, SXU-1, EXT and LBUS compatible products. Length: 0,3m / 0,98ft. For SRH-3,...
Adapter cable to connect the ERM LCS to Master Grips, OCU-1, DRW-1 and DEH-1 via the LBUS socket. Recommended and required optional extension cables: SRH FS CAN Bus Cable, 1m/3.2ft K2.0033762, SRH FS CAN Bus Cable, 10m/32.8ft K2.0019302, SRH FS CAN Bus Cable, 25m/82ft K2.0019301, For ERM LCS only.
The SSB-3 bracket can be used to mount the Volt control box to the top stage of the artemis. Or can be used as a focus bracket which can be mounted at the artemis top stage, or the to SAM plates, or to the CCS dovetail plates.
Tilta Float System RS 2 Battery Counterweight Bracket
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien Rail Mounting Attachment
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Power / Data cable for the ARRI Starlight monitor used with the TRINITY. 5 pin Lemo 0B straight plug
24V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306). 24V High Capacity, 3pin XLR, Length: 10m/33ft. For SRH-3 and SRH-360
12V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306), 12V High Capacity, 4pin XLR, Length: 10m/33ft. For SRH-3 and SRH-360
External power cable to use the TRINITY head as a stand-alone Gimbal. Anton Bauer D-Tab -> Lemo 1S 4pin 12 Volt
Support bar lower, length 1000mm/39.37in
12V HiCap 90° angled camera power cable / Lemo 1B 4pin -> Lemo 2B 8pin / for ARRI AMIRA & ALEXA Mini. 12 Volt / High Capacity
Support bar lower, length 800mm - 31.5 in (Std. For Easyrig 3 GimbalRig)
Lower support bar 800mm/31.5in
Add a second handle to your DJI RS 3 Pro or RS 2 gimbal that incorporates power output, gimbal movement, and camera control with this Advanced Rear Operating Control Handle from Tilta. This improved handle mounts onto the electronic NATO mounts on the side of the gimbal handle, and its adjustable arm facilitates two-handed operation for high-angle or...
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Cable to power the system through the Top Stage from the Battery Hanger. TRINITY Power cable / Lemo 1B 4pin -> 1B 4pin
Easyrig super clamp (comes in pairs)
Cable to power the system through the Top Stage from the Battery Hanger. TRINITY Power cable / Lemo 1S 3pin -> 1B 4pin
Cable to power the TRINITY system through the Top Stage from the Battery Hanger. Lemo 1S 3pin to 1S 3pin Note: Only for TRINITY upgraded to 24V.
Support bar lower, length 600mm - 23.6 in (Std. For Easyrig 3)
Standardfor Easyrig 2.5 and Easyrig 3 Cinema up to +130/ 5in arms
EasyTilt
Hydra Alien Monitor Bracket
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Rear Operating Control Handle for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
12V HiCap camera power cable / Lemo 1B 4pin -> Lemo 2B 8pin / for ARRI AMIRA & ALEXA Mini. 12 Volt / High Capacity
24V Power Distribution Module for DJI Ronin 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Monitor mounting adapter for Transvideo CineHD 6'', CineHD 8'', RainbowHD and the Starlight monitors
12V high capacity camera power cable. Lemo 2B 7pin to Lemo 2B 8pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
12V high capacity camera power cable. Lemo 2B 7pin to Lemo 1B 6pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
24V high capacity camera power cable. Lemo 2B 7pin to Lemo 2B 8pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
Lower nylon block, with pivot stop
Wireless Thumb Controller for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Connect 50mm speed rail to any vehicle with a tow hook with this Front Tow Hook Adapter for Speed Rail Car Mounting Kit from Tilta.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
12V high capacity camera power cable. Lemo 2B 7pin to XLR 4pin, 90° elbow, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY or the MAXIMA.
C-Stand with Removable Turtle Base. Max. height 155 cm (61´ inch). For all artemis systems and to park the MAXIMA with mounted Spider K2.0010425
Complete EASYLOCK, ONLY FOR GIMBAL VESTS (requires special sewing machine)
Power cable to power the Volt Control Box from the artemis top stage. Lemo 0B 3pin - Fischer 3pin Length: 0.3m/0.9ft
24V high capacity camera power cable. Lemo 2B 7pin to XLR 4pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
High capacity 12V / 24V power cable to connect the Battery Hanger Module with the Top Stage or Bottom Stage Gen. 2. Lemo 2B 7pin to Lemo 2B 7pin. ARTEMIS 2, TRINITY 2 only!
Lower / Upper tube out of steel, length 100mm / 3.93"
Lower nylon block
1200N gas shock absorber, Strong (NOTE! Can't be mounted on a standard Vario 5)
850N gas shock absorber, Standard
Power cable to power the Volt Control Box from the artemis top stage. Lemo 0B 3pin - Lemo 0S 4pin Length: 0.3m/0.9ft
Power cable to power the Volt Control Box from the artemis top stage. Lemo 0B 3pin - Lemo 0B 2pin Length: 0.3m/0.9ft
Power cable D-Tap to 2pin Lemo 0B. Length: 1m/3.2f, For ERM SRH, ERM LCS
24V high capacity camera power cable. Lemo 2B 7pin to Lemo 2B 4pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
Add a second handle to your DJI RS 3 Pro or 2 gimbal that incorporates power output, gimbal movement, and camera control with this Rear Operating Control Handle from Tilta. The handle screws onto the electronic contacts on the side of the gimbal handle, and its adjustable arm facilitates two-handed operation for high- or low-angle shots.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Replace the original sled on your DJI RS 3 or RS 3 Pro gimbal with this Power Pass-Through Plate from Tilta for additional power options on your rig. The plate is compatible with Manfrotto-style quick release plates to mount just about any camera.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
BNC-SMB Cable for the TRINITY Joystick Main Cable. Replacment for the BNC-SMB Cable included in the TRINITY Joystick Main Cable (K2.0014804)
Additional monitor bracket to mount a second small monitor onto the rods of all artemis artemis monitor brackets. Works with: K2.0010321, K2.0010322, K2.0010323, K2.0010324. Note: Transvideo monitor mount 6639 is not included!
Upper attach 200-750N (M6 threads)
Upper attach 900-1200N (M8 threads)
Wind Net 4'(120cm)x6'(180cm)
Flexible joystick cable to connect the Master Grip TRINITY to the TRINITY 2 when the rig is fully extended or when using a Super Post. Lemo 0B 4pin to Lemo 0B 4pin, 125cm/49in. TRINITY 2 only
Mid nylon block, complete unit, with pivot stop
Plastic cover
29mm high adapter for use with Box Cameras like Sony P1, to get them into a more usable camera hight.
Usually ships within 4 to 8 weeks
Front Docking Fork Dia. 50mm Opening
12V power cable to connect a battery with D-Tab to the SRH-3 remote control panel. 12V, D-Tab, 4pin XLR, 1,5m/5ft, For SRH-3
Adapter to mount ARRI or cmotion focus receivers at the artemis Focus Bracket. For the artemis Focus Bracket K2.0010446
Focus bracket adapter to mount Preston MDR2 or MDR3 focus receivers onto the artemis focus bracket. For the artemis Focus Bracket K2.0010446
Flexible joystick cable to connect Master Grip TRINITY with TRINITY 2. Lemo 0B 4pin to Lemo 0B 4pin, 75cm/29.5in. TRINITY 2 only
12V high capacity camera power cable. Lemo 2B 7pin to XLR 4pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
Comfortably support your RS 2, RSC 2, RS 3, or RS 3 Pro gimbal using both hands and the Dual-Handle Bracket for DJI Ronin from Tilta. Made of lightweight yet durable aluminum, each flexible handle features a rotatable folding design, a shoe mount, and anti-twist 1/4"-20 and 3/8"-16 accessory threads.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Lower attach 200-750N (M6 threads)
Lower attach 900-1200N (M8 threads)
12V power cable to power a Transvideo Starlight, or Small HD 503 monitor from the Master Grip TRINITY. Lemo 0B 4pin to Lemo 0B 2pin. MGT-1, MGT-2, TRINITY 2 only!
Wireless Control Receiver Module for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Remote Control Receiver Module for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
900N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M8 threads)
500N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
600N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
750N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
Umbrella with holder, fits our ALU profile, for Easyrig Minimax
Mid nylon block, complete unit, rotating
Quick release camera hook, with 2 pcs 3/8" and 2 pcs 1/4" ball studs
300N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
Bellow block
Quick release camera hook, with 2 pcs 3/8" and 2 pcs 1/4" ball studs
Camera hook with ball stud mounted
400N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
1000N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M8 threads)
200N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
1200N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M8 threads)
The most common spare parts gathered in a plastic box
Camera hook with ball stud mounted
Quick release camera hook, with 2 pcs 3/8" and 2 pcs 1/4" ball studs
Shock absorber 900N (M8 threads)
Shock absorber 1200N (M8 threads)
Shock absorber 1000N (M8 threads)
Cheese plate to Sony Venice for Minimax
Cheese plate to Sony Venice for Cinema 3
Umbrella with Holder
Cheese plate to Sony Venice for Vario 5
Universal Monitor Mounting Set, TRINITY 2
Receiver mount for ARRI, cmotion, Aladin, Fox and Preston focus receivers. For all artemis systems. Note: Additional adapters are needed for ARRI and Cmotion K2.0010447 and for Preston K2.0010448
Additional compact counterweight. Weight: 300gr, 0,66 lbs. TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
This extension will add a knurled handle to the top of the 1.8" Gimbal. This way the Gimbal will have knurled handles at both ends. diameter 1.8" - length 52mm (2"). Works with all artemis 1.8" artemis Gimbal
Double rubber bellow for the 500mm/19.7in steel pipe
Arm Post with diameter 5/8'' (15.8 mm) and a length of 10'' (254 mm). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Tally Sensor Cable / Lemo 0B 4pin
12V power cable to power a ARRI Starlite monitor from the Master Grip TRINITY. Lemo 0B 4pin to Lemo 0B 5pin. MGT-1, MGT-2, TRINITY 2 only!
Hydra Alien 100mm Ball Head Riser (100mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 100mm Ball Head Riser (150mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 100mm Ball Head Riser (200mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 75mm Ball Head Riser (100mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 75mm Ball Head Riser (150mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 75mm Ball Head Riser (200mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien Large Suction Cup
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien Small Suction Cup
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Wind Net 3'(90cm)x4'(120cm)
Camera hook, Phillips, RED, gap 50mm / 1.96in
Camera hook, Phillips, RED, gap 50mm / 1.96in
Tally Gen.2 Pwr, TST-2, Fischer 3pin to Lemo 0S 3pin, 0,35m / 13.7in
Tally Gen.2 Pwr, TRH-2, Fischer 3pin to Lemo 0S 3pin, 0,75m / 29.5in
Spare cone for the Spider K2.0010425 used with the MAXIMA QL Fits spigots and arm posts with 15,9mm 5/8in diameter
Additional compact counterweight. Weight: 50gr, 0.110 lb. TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
The 3/8" extension allows additional counterweights to be mounted on the TRINITY Pendulum Gen. 2. Attaching counterweights to the side of the top and bottom stages TST-1, TST-2, BST-1, BST-2. But also stacking two SAM Zero dovetail plates on top of each other to raise the COG of smaller cameras. TRINITY Pendulum Gen.2, TST-1, TST-2, BST-1, BST-2, SAM Zero...
12V power cable to power a second ARRI Starlite monitor from the TALLY Gen.2 host. Lemo 0B 2pin to Lemo 0B 2pin. TALLY Gen.2
Additional compact counterweight. Weight: 150g / 0.33lb. TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Smooth your gimbal vehicle shots by reducing shake and vibration with the Hydra Alien Shock-Absorbing Head with Soft Spring Module from Tilta when using it with a Hydra Alien or Predator shock-absorbing arm. This vibration-dampening unit supports gimbals such as the DJI RS 3 or RS 2 in an inverted orientation.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Camera hook, standard for Easyrig 3
Lower straight support bar complete with line wheel and guide wheel, without spring
Front block with a red line wheel, mount for ST001
Lower straight support bar complete with line wheel and guide wheel, without spring
Ratchet belt buckle for EASYLOCK
Shock absorber 750N (M6 threads)
Shock absorber 600N (M6 threads)
Shock absorber 200N (M6 threads)
Camera hook, standard for all rigs, this with wider gap 44mm/1.73in
Shock absorber 500N (M6 threads)
Shock absorber 300N (M6 threads)
Shock absorber 400N (M6 threads)
Extents the length of the artemis Gimbal handle by 35mm (1,37''). Only for artemis Gimbals with the bended round handle
Wider arm post fort artemis springs arms and arms using 0.625in / 15.9mm arm posts
Additional compact counterweight. Weight: 25gr, 0.055 lb. TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Power / Tally cable that connects the Tally host module to CCP Live.
Adjustable nylon block for extended upper support bar, complete with knob and washers
Adjustable nylon block for upper support bar, complete with knob and washers
Adjustable nylon block for extended upper support bar, complete with knob and 2 washers
Short 15mm to 19mm rod for the use of the K2.0014831 Monitor Mount for Transvideo and K2.0014832 Monitor Mount for SmallHD with the TRINITY Joystick, Monitor mount Diameter 15mm and 19mm, usable length 80mm / 3.15in
Tally Gen.2 Pwr, TST-1, Lemo 0S 3pin to 0S 3pin, 0,35m / 13.7in
Tally Gen.2 Mon Pwr, Lemo 0B 5pin to 0S 3pin, 0,25m / 9.8in
Battery Plate for Hydra Arm Mini - Gold Mount
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Battery Plate for Hydra Arm Mini -V Mount
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Camera hook
Upper cross bar
Plastic cover, complete
Monitor Power, 12V, Lemo 0B 2pin to 5pin
Tally Gen.2 Mon Pwr, Lemo 0B 2pin to 0B 2pin, 0,10m / 3.9in
Spindle mount, attaches to a diameter 25mm/0.98" & diameter 30mm/1.18" gimbal frame
Top Camera Support Bracket for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Spare rubber duck antenna. Note: Only for ERM-900 (K2.0033758)
Cylindrical adapter into which an articulated arm with a 1/4 inch thread can be screwed.
Cylindrical adapter into which an articulated arm with a 1/4 inch thread can be screwed.
When using the Advanced Rear Operating Control Handle to your DJI RS 3 Pro or RS 2 gimbal stabilizer, add more room for the large gimbal to maneuver with this RS 3 Pro Expansion Bracket from Tilta.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Mount with ball stud and locking mechanism
Top chassi plate 2mm/0.08in
Tube between bars, STEEL, Middle pipe to rise the upper bar for use with Serene arm, length 500mm/19.7 in
Side distance with holes, length 260mm/10.23in
Bottom chassi plate strong, 3mm/0.118in
Bottom chassi plate, 2mm/0.08in
Top chassi plate strong, 3mm/0.118in
Umbrella without holder for our larger systems, Easyrig 3 and Vario 5
Hanger for the STABIL Light arm
Umbrella without holder for the Minimax system
Spare arm post clamp ring. Fits any diameter 5/8in 15.8mm arm post
Lower nylon block with pivot stop
Easyrig Holder for Umbrella, fits the larger ALU profile (Easyrig 3 & Vario 5).
Holder for umbrella, fits our ALU profile, for Easyrig Minimax
Rubber bellow
Upper nylon block
Rubber bellow
Upper nylon block
Rubber bellow
Rubber bellow
Lower nylon block Old
Alu pipe, 30X680 mm / 1.18X26.77 in
Side pouch for Minimax vest
Support bar, length of Alu profile 390mm/15,35in
End plug of nylon with 1/4" threads and spacing for line to Ext.+130mm and +230mm upper arms
Nylon end plug with 1/4" threads and spacing for line for Ext.+130mm, +230mm upper arms and the STABIL arm
Cover for the STABIL arm, same fabric as on the vest, fits STABIL and STABIL G2/G3
Support bar, length of Alu profile 455mm/17,91in, line exit adjustment 280mm/11in
Arm Post with diameter 5/8'' (15.8 mm) and a length of 6'' (152.4 mm). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Arm Post with diameter 5/8'' (15.8 mm) and a length of 3'' (76 mm). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Spare rubber duck antenna. Note: Only for ERM-2400 (K2.0033763)
Tube between bars, STEEL, only for Varo 5 strong thickness 4mm / 0.157iN Length 300mm / 11.8in
End plug of nylon with 1/4" threads, for upper Std. arm
Black line wheel
Adjustable nylon block for the upper support bar, complete with knob and 2 washers
Tube between bars, ALU, only for Vario 5 Std. thickness 4mm / 0.157iN Length 300mm / 11.8in
Spring adjustment knob
Cover plate for spring mechanism, Alu.
Nylon end plug with 1/4" threads, for upper Std. arm
Safety strap
Tube between bars (New) for 200-1200N models (Al. thickness 4mm/0.157in) L:225mm/8.85in
Hanger for Easyrig systems equipped with the STABIL arm.
Side plate for EASYLOCK
Tube between bars for 900-1200N models (Steel, thickness 4,0 mm/0.157in) L: 300mm / 11.8in
Upper crossbar
Safety strap
Handheld Gimbal Tripod Clamp
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Coupler Pom Insert Adapter
Ring around Tube diameter 20mm/0.78in Old model
Ring around tube with pivot stop
Side help upper, with rubber cover
Ring around tube diameter 20mm/0.78in, with pivot stop
Ring around tube diameter 20mm/0.78in Old
Ropes with loop endings, comes in pair
Side help lower
Nucleus-Nano Hand Wheel Attachment Plate for RS 2/Ronin S
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Spring adjustment knob
Bracket for allen key, attached to the swinging arm axle
Side distance with holes, length 95mm/3.74in
Lower chassi mount for plastic cover
Backup Post Tool for all artemis and TRINITY systems.
Lower crossbar
Rope wheel with ball bearings - axle diameter 6MM/0.24in
Rope wheels with ball bearings - axle diameter 6MM/0.24in
Lower cross bar
Slip ring for bar diameter 26mm/1.02in
Left Side NATO Rail to Rosette Adapter
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Lightweight Springs for Hydra Alien
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Right Side NATO Rail to Rosette Adapter
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Side Mounted Cold Shoe Adapter
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Rosette Extender Arm
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Wireless Video Mounting Bracket
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Side Arm Counterweight Clamp
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Attach hoop for support bar
Side bar
220g Counterweight
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Rope with manual and tools (for all Easyrig 3 except Easyrig 3 Gimbalrig) Length: 360cm/142"
Linestopper for all Easyrig models
Rope replacement kit for the Easyrig 3 GimbalRig system (long absorbers) L: 490cm / 193in, with tools and manual
Red line wheel
Red line wheel
Chassi screw kit for Vario 5 strong, Includes all screws and locking nuts for 1 complete unit
Adjustment allen key +/-
Rope with manual and tools, for Easyrig 5 Vario
Axis Adjustment Locking Plates for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien Tool Kit
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Tool Kit for Hydra Predator Shock Absorbing Arm
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Strap for EASYLOCK
Protection Kit for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Tilta Tactical Patches (Hydra Logo Type II)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Protect your DJI RS 3 and RS 3 Pro gimbal screen with this Tilta Protection Kit. Included in the kit is a tempered glass screen protector that is scratch and chip resistant. A cleaning paper, cleaning sticker, and a round sealing sticker are also included in the kit to ensure your screen is clean before installation.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Rope wheel diameter 20mm/0.78in - axle diameter 4mm/0.15in
Rope wheel diameter 24,5mm/0.96in - axle diameter 4mm/0.15in
100g Counterweight
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Side distance round, height 40mm/1.57in
Holder for side bar, delivered with washers and M6 screw
Bottom piece
Screw for cover, (comes in pairs)