Remote Control Unit for PTZ Camera Include AC Adapter and panel sheet
1 pieces in stock
The SKAARHOJ PTZ Wiz is a super-compact PoE-powered VISCA-over-IP controller that integrates control of video switchers like ATEM, vMix or any other SKAARHOJ supported live switcher system.
1 pieces in stock
BirdDog Pole Mount Adapter for A200 / A300
1 pieces in stock
Software Upgrade for AW-HE40 Series
1 pieces in stock
Wireless Remote Control for AW-HE60S/H and AW-HE130W/K.
2 pieces in stock
Drop Ceiling Camera Support Bracket for CV620 & CV630 Cameras
1 pieces in stock
BirdDog Ceiling Mount for P100 / P200 / P400
1 pieces in stock
Large Motion Control Robot built for Broadcast. 40KG Payload, 3.4m max camera height, 2.1m reach
Large Motion Control Robot built for Broadcast. 40KG Payload, 3.4m max camera height, 2.1m reach
Larger track base for the Studiobot XL
HDC-P50 + HZC-UHD50 + Optical Low pass filter 1-856-731-31
FE-165 Elevation Unit. Robotic/Manual Pedestal controlling elevation position on the studio floor. Easily converts to full manual control. ax. payload incl. head: 75 kg (165 lb) Height Range: 700 to 1600 mm (28 to 63 I
HDCU-3100 with HKCU-SDI30 and HKCU-UHD30 installed
HDCU-3100 with HKCU-SFP30 and HKCU-UHD30 installed
Absolute Positioning System upgrade or the FP-145 and FP-188 pedestals to provide a targeting solution which does not require a floor target. Includes the APS laser scanner, internal cables and smaller steering ring .
Automated control system with control of 6 heads, 2U Server
Robotic Pedestal controlling elevation position on the studio floor.
FE-55 Elevation Unit. Robotic Pedestal controlling elevation on the studio floor. ax. payload incl. head: 25 kg (55 lb) Height Range: 700 to 1400 mm (28 to 55 I
Automated control system with control of 4 heads, 1U Server
Noise jacket to reduce robotic arm noise in studio
Compact controller with integrated panel, 10.4 inches touchscreen and PC chassis to run VRC user interface software. 16 camera selection buttons, two 3-axis joysticks (one for control of P/T/Z, and one for X/Y/Z movement) and rotary focus control.
Dual Joystick VRC Control Panel. 16 camera selection buttons, two 3-axis joysticks (one for control of P/T/Z, and one for X/Y/Z) and rotary focus, iris and black controls. Includes GPIO, 12V PSU and 3m RS422 serial cable to VRC.
VRC automation interface to enable the pre-set shots to be triggered by a playout system. Supporting vendors include Grass Valley, Sony, Ross, Snell, Mosart and Aveco.
Single Joystick VRC Control Panel. 16 camera selection buttons, a 3-axis joystick (for control of P/T/Z) and rotary focus, iris and black controls. Includes GPIO, 12V PSU and 3m RS422 cable to VRC.
Pan bar controller that allows a head to mirror the pan par movements allowing traditional camera style opertation of a P/T
VRC-DJP focus LHS. Dual Joystick VRC Control Panel. 16 camera selection buttons, two 3-axis joysticks (one for control of P/T/Z, and one for X/Y/Z) and rotary focus control. Includes GPIO, 12V PSU and 3m RS422 serial cable to VRC.
Single Joystick VRC Control Panel. 16 camera selection buttons, a 3-axis joystick (for control of P/T/Z) and rotary focus control. Includes GPIO, 12V PSU and 3m RS422 serial cable to VRC.
Rise and fall column with 655mm (25.8") travel for PTZ or AFC head, lowest height 515mm (20.3") max height 2130mm (83.9"). Payload 10KG, option Free D
Up to 20 PTZ+DC PC based software controller (10 with dolly and/or columns)
Usually ships within 6 weeks
Control panel for typical broadcast applications
Edge Analytics Close-up by Gesture License
3 m (9.9ft) Track solution for PTZ or AFC heads with option of rise and fall column, includes short feet for floor or table mount
Sony Ccf-300 (Ccf300) Hybrid Fibre Cable For HDC-1500 Camera Family (300M).
EDGE ANALYTICS LICENSE CHROMA
MRMC TRH Rail System-1 1M section of straight broadcast rail for TRH-01 track dolly system
µVRC robotic controller, comprising 21" AIO touchscreen computer running Embedded Windows, USB compact joystick panel and the latest modular version of VRC software. Supports control of 4 Vantage heads with options to add further functionality through licensing
PTZ Control
Usually ships within 6 weeks
PTZ Control Panel
Usually ships within 6 weeks
Outdoor-Housing for mid size Panasonic PTZs : AW-UE80, UE100, incl. OHCM-1 wall-mount
Usually ships within 6 weeks
Sony Ccf-200 (Ccf200) Hybrid Fibre Cable For HDC-1500 Camera Family (200M).
Outdoor-Housing for middle size PTZs : AW-UE80, UE100, incl. OHWM-1 wall-mount
Usually ships within 6 weeks
2 m (6.6ft) Track solution for PTZ or AFC heads with option of rise and fall column, includes short feet for floor or table mount
Mount for Panasonic AW-HE130 camera, remote end singlemode HD-SDI transmitter, Genlock receiver with bidirectional RS232/422 data, tally and 10/100 BaseT on 2 fibres
Usually ships within 2 to 3 weeks
Outdoor-Housing for small Panasonic PTZs : AW-HE40, UE40, UE50, UE70.
Usually ships within 6 weeks
Outdoor-Housing for small Panasonic PTZs : AW-HE40, UE40, UE50, UE70.
Usually ships within 6 weeks
PTZ Extreme w/Blue Pill Inside
Usually ships within 4 weeks
EDGE ANALYTICS LICENSE CROP
Simple automated tracking of up to 3 P/T heads- SOFTWARE ONLY
Software "TUNING S" Up to 10 PTZ+DC PC based software. With "Thumbnail" - sequencing - loop and loop reverse feature. PC and ethernet switch not included
Usually ships within 6 weeks
Firmware upgrade to the robotic or manual/robotic head to enable tracking data output.
VRC software upgrade to the latest released version.
Includes: Software license for 3 Panasonic systems, compatibility with all Panasonic PTZ and Panasonic 3rd party products (Movicom Robyhead PTZ head).
Usually ships within 6 weeks
Outdoor-Housing for mid size Panasonic PTZs : AW-UE80, UE100, incl. OHCM-1 wall-mount
Usually ships within 6 weeks
Sony Ccf-100 (Ccf100) Hybrid Fibre Cables For HDC-1500 Camera Family (100M).
Simple automated tracking of 3 PANASONIC P/T head- SOFTWARE ONLY
Pen drive including software to control up to 5 PTZ cameras and 5 Lifto 25
Touchscreen, VGA and DVI input.
Edge Analytics Appliance Handwriting Extraction License
Outdoor-Housing for middle size PTZs : AW-UE80, UE100, incl. OHWM-1 wall-mount
Usually ships within 6 weeks
BirdDog Camera Director - Multi-Camera Production Software For Automating PTZ Productions
Usually ships within 1-2 weeks
50m Optical Fiber SMPTE 311M with Lemo connector
Edge Analytics Appliance creates impactful video presentation content which previously would have required significant time, expense and human resource to produce. With Artificial Intelligence-led technology, the REA-C1000 vastly improves the quality of communication by empowering the presenter to deliver content and to engage their audience like never...
Outdoor-Housing for small Panasonic PTZs : AW-HE40, UE40, UE50, UE70.
Usually ships within 6 weeks
QBall Universal RCP to control up to 18 cameras. Desk Mounted, includes tally inputs, auto iris, white balance, colour gain, black control, black balance.
Outdoor-Housing for small Panasonic PTZs : AW-HE40, UE40, UE50, UE70
Usually ships within 6 weeks
Genlock board and firmware upgrade to the robotic head to enable tracking data output.
Outdoor-Housing for mid size Panasonic PTZs : AW-UE80, UE100, incl. OHCM-1 wall-mount
Usually ships within 6 weeks
Outdoor-Housing for mid size Panasonic PTZs : AW-UE80, UE100, incl. OHCM-1 wall-mount
Usually ships within 6 weeks
Outdoor-Housing for middle size PTZs : AW-UE80, UE100, incl. OHWM-1 wall-mount
Usually ships within 6 weeks
Outdoor-Housing for middle size PTZs : AW-UE80, UE100, incl. OHWM-1 wall-mount
Usually ships within 6 weeks
PTZ Pro w/Hall Effect Joystick and Blue Pill Inside
Usually ships within 4 weeks
Outdoor-Housing for small Panasonic PTZs : AW-HE40, UE40, UE50, UE70.
Usually ships within 6 weeks
Outdoor-Housing for small Panasonic PTZs : AW-HE40, UE40, UE50, UE70.
Usually ships within 6 weeks
Outdoor-Housing for small Panasonic PTZs : AW-HE40, UE40, UE50, UE70
Usually ships within 6 weeks
Outdoor-Housing for small Panasonic PTZs : AW-HE40, UE40, UE50, UE70
Usually ships within 6 weeks
Changeover box to support the FH-145 head when used in conjunction with Fujinon digital zoom and focus demands. Handles switching and routing of lens control and encoder signals. Includes box, mounting accessories and cables.
Changeover box to support the FH-145 head when used in conjunction with Canon digital zoom and focus demands. Handles switching and routing of lens control and encoder signals. Includes box, mounting accessories and cables.
QBall Universal RCP to control up to 18 cameras. Panel Mounted, includes tally inputs, auto iris, white balance, colour gain, black control, black balance.
Modification for the AW-UE150 (also compatible with AW-HE145). The optical block is exchanged for a new one with a low-pass filter. This is a PERMANENT mod: the camera cannot be used without OLPF after the change. There is a slight degradation in resolution.
Usually ships within 6 weeks
The AW-RP60GJ is equipped with a 3.5-type LCD screen to deliver a GUI menu where the information you need is provided at a glance for intuitive and quick camera control.
Delivery time unknown
PTZ Pro w/Blue Pill inside
Usually ships within 4 weeks
1 Day Of Integration On Site
Usually ships within 6 weeks
KST outdoor housing for AW-HE40 and AW-UE70, with transparent dome DBH06 (SDI) / wall bracket
Simple automated tracking of 1 P/T head- SOFTWARE ONLY
PTZ Fly w/Hall Effect Joystick and Blue Pill inside
Usually ships within 4 weeks
VR Upgrade for FE-xxx Elevation Unit
Includes: Software license for 1 Panasonic system, compatibility with all Panasonic PTZ and Panasonic 3rd party products (Movicom Robyhead PTZ head).
Usually ships within 6 weeks
Box including electronic control for 1 Lifto 25 (cables included)
Simple automated tracking of 1 PANASONIC P/T head- SOFTWARE ONLY
BirdDog PTZ Keyboard controller w/NDI, VISCA, RS-232 & RS422, BirdDog Comms compatible
Usually ships within 1-2 weeks
AC power and ethernet cables within overall sleave. Compatible with FH-200, FH-145 and FHR-145 heads only.
Fusion floor cable, 50m. AC power and ethernet cables within overall sleave. Compatible with FH-145/FHR-145 and FBH-175+/FP-188+/FPR-210+ pedestal combinations and FHR-35 head-only systems.
Low-pass filter modification for AK-UC4000
Usually ships within 6 weeks
PTZ Fly w/Blue Pill inside
Usually ships within 4 weeks
QBall mini joystick panel, controls up to 5 heads. Configuration options to adjust the speed, set limits, simple CCU functions.
Fixed Pedestal for UR5, has to be firmly mounted (fixed) on the stable floor
Usually ships within 6 weeks
Ip Remote Control Unit (F. Brc-H900/Z700/Z300 Only)
Fixed Pedestal for UR3, has to be firmly mounted (fixed) on the stable floor
Usually ships within 6 weeks
The RMC-300A is a multi-functional remote control unit. Controls up to 24 Datavideo PTZ/block cameras, 14 presets/camera, Supports iOS/Android tablet (Not supplied yet necessary), Remote Control via Serial (8 ports) and 16 DVIP-ports, Setting up the axis zoom by the knob, the axis pan/tilt by the joystick, Firmware upgrade, tablet charging by USB.
Usually ships within 3 to 4 weeks
Add the RA-AT001 Auto-Tracking Application to your Canon CR-N700, N500, or N300 PTZ camera to enable smooth subject framing and tracking.
Usually ships within 2 weeks
1 Day Of Maintenance On Site
Usually ships within 6 weeks
1/2 Day Of Integration On Site
Usually ships within 6 weeks
1 Day Operator Training Max. 5 People
Usually ships within 6 weeks
Compsite Optical Fibre Cable (10M).
Wide cradle for FH-145 and FHR-145 heads to accommodate studio cameras and large lens adaptors for portable cameras
PTZ NDI / IP Camera Controller with Joystick, Zoom Rocker & Control Dials w/Preview Screen
Usually ships within 2 weeks
FHR-35 pedestal riser and ceiling bracket
AC power and ethernet cables within overall sleave. Compatible with FH-200, FH-145 and FHR-145 heads only.
Fusion floor cable, 30m. AC power and ethernet cables within overall sleave. Compatible with FH-145/FHR-145 and FBH-175+/FP-188+/FPR-210+ pedestal combinations and FHR-35 head-only systems.
Augmented Reality Hardware Upgrade kit
Usually ships within 6 weeks
The PTZ Wiz V2 IP-Based Controller and Switcher from SKAARHOJ offers multi-function keys for presets, camera selection and live switching.
Delay 3 months
Option Software For Cna-1 To Use Rcp On Brc Control
Additional head licence for Polymotion Chat Pro
Sheet of 240 reflectors, suitable for ceiling heights of 2-4m
PTZ Camera Control Unit for up-to 4 Pan,Tilt & Zoom Cameras, 50 Presets/camera for position/zoom/focus and video calibration parameters, Control thru standard CAT-5/6 cable upto 100 meter, Supports VISCA over RS-422 (point-to-point), Compatible with Datavideo's switcher tally indicators
Usually ships within 3 to 4 weeks
FHR-35 wall mounting bracket
Includes: Additional license to support 1 additional Panasonic system, compatibility with all Panasonic PTZ and Panasonic 3rd party products (Movicom Robyhead PTZ head). Polymotion Chat Pro Panasonic / Basic License required.
Usually ships within 6 weeks
Vantage ceiling bracket
Compact Weatherproof Dome Housing for PTZ w/Fan and Heater
Usually ships within 2 weeks
AC power and ethernet cables within overall sleave. Compatible with FH-200, FH-145 and FHR-145 heads only.
Pan bar mounting bracket for Vector pan bars to allow fitting of studio lens demands.
Fusion floor cable, 20m. AC power and ethernet cables within overall sleave. Compatible with FH-145/FHR-145 and FBH-175+/FP-188+/FPR-210+ pedestal combinations and FHR-35 head-only systems.
Add the RA-AL001 Auto-Looping Application to your Canon CR-N700, N500, or N300 PTZ camera to enable programmable, automated pan/tilt/zoom moves.
Usually ships within 2 weeks
New 4K permanent License for SRG-X120 & SRG-X400. (Need new firmware v2.0)
Vantage wall mounting bracket
Adaptor plate for FH-145 and FHR-145 heads to accommodate studio lenses and prompters
Compact PTZ Joystick Controller FULL DUPLEX RS-232/RS-422 with Visca & Pelco protocols for seamless simultaneous control over PAN-TILT-ZOOM-FOCUS, menu control, and other one-button control features.
Usually ships within 2 weeks
AC power and ethernet cables within overall sleave. Compatible with FH-145/FHR-145 and FBH-175+/FP-188+/FPR-210+ pedestal combinations and FHR-35 head-only systems.
Sheet of 120 reflectors, suitable for ceiling heights of 3-6m
AC power and ethernet cables within overall sleave. Compatible with FH-200, FH-145 and FHR-145 heads only.
Fusion floor cable, 10m. AC power and ethernet cables within overall sleave. Compatible with FH-145/FHR-145 and FBH-175+/FP-188+/FPR-210+ pedestal combinations and FHR-35 head-only systems.
Demand cable zoom, focus
1/2 Day Of Maintenance On Site
Usually ships within 6 weeks
1/2 Day Operator Training Max. 5 People
Usually ships within 6 weeks
Telycam TLC-50TC is a full-featured, easy-to-operate PTZ joystick control keyboard, applied for PTZ camera serial or network remote control, designed to simplify and improve the work and efficiency of video production operators.
Telycam TLC-50TC is a full-featured, easy-to-operate PTZ joystick control keyboard, applied for PTZ camera serial or network remote control, designed to simplify and improve the work and efficiency of video production operators.
Software for direct control applications of P/T heads, compatible with 3rd party PTZ cameras
Free in year 1, inc software updates, access to support and training content
Vinten 4-bolt fixing adaptor with Quickfix groove and level bubble, for the FHR-35 head.
BirdDog A300 Wall Mounting Kit
Usually ships within 1-2 weeks
BirdDog A300 Ceiling Mounting Kit
Usually ships within 1-2 weeks
ICE lens cable for Fujinon digital BERD lenses, 10 pin. Compatible with BERDS48,S58 and S1 variants
ICE lens cable for Canon digital IASE lenses, 20 pin. Compatible with Canon digital studio lenses
ICE lens cable for Fujinon digital BEZD/BERD lenses, 20 pin
ICE lens cable for Fujinon digital studio lens, 9 pin and 20 pin
ICE lens cable for Canon analogue studio lens, 18 pin
ICE lens cable for Fujinon digital studio lens, 9 pin and 20 pin
Usually ships within 6 weeks
Extra Weight Kit A+B
Usually ships within 6 weeks
Extra Weight Kit A+A
Usually ships within 6 weeks
MRMC QRS first rail kit, adds connectors and bumper system. For first time buyers of this system only.
Extension Cable 20m
Upgrade for one hardware Tuning system with totem. (descending or ascending), or dolly and totem combined. Makes the system compatible with FreeD protocol (sends position data in real time).
Usually ships within 6 weeks
Augmented Reality Hardware Upgrade kit
Usually ships within 6 weeks
TLC-50TC - Protocol: VISCA over IP, VISCA, ONVIF, PELCO P/D - RS422, RS232, RS485, RJ45., Black
TLC-50TC - Protocol: VISCA over IP, VISCA, ONVIF, PELCO P/D - RS422, RS232, RS485, RJ45., Silver
97W PoE Power Injector for A200 / A300
Usually ships within 1-2 weeks
For hosting of serial third-party PTZ cameras on VRC system, including Canon BU series and Sony BRC series cameras.
Vantage lens cable for Fujinon digital BEZD/BERD lenses, 20 pin
Vantage lens cable for Fujinon digital BERD lenses, 10 pin
Vantage lens cable for Canon digital IASE lenses, 20 pin
Rack mounted ethernet switch, 24-port
Simple intuitive controller for Slidekamera control
Large Weatherproof Housing with Fan & Heater for CV420-30X & CV420-18X
Usually ships within 2 weeks
Pair of wall mount kits for MRMC QRS rail, 1 set per 3m
Cable management net
Rack mounted ethernet switch, 16-port
Extension Cable - 10m
1x7 RS-232/RS-485 Home Run Splitter/Amplifier
Usually ships within 2 weeks
Universal Wall Mount Bracket (Black) for CR-N500, CR-N700.
Usually ships within 2 weeks
Universal Wall Mount Bracket (Black) for CR-N500, CR-N700.
Usually ships within 2 weeks
Vinten 75mm bowl adpater fixing adaptor for 75mm tripods
BirdDog Upright/Ceiling Mounting Base for A300
Usually ships within 1-2 weeks
Sheet of 60 reflectors, suitable for ceiling heights of 4-8m
The Kiloview PTZ Deck is a control panel for controlling PTZ cameras.
Rugged ceiling mount for PTR-10, consists of 4 metal prepressed plates, two for mounting purpose and two as an L-shaped bracked to be able to fit the camera (wider camera mount)
Usually ships within 3 to 4 weeks
Wall Installation Mount for PTZ Cameras
Usually ships within 2 weeks
Outdoor Camera Housing IP68 (water/dust proof) & IK10 (vandal proof) with Sun-Shield and built-in FAN/HEATER, light weigh aluminum, top-open access and power pass through to run Heater & Fan. Wall mount housing bracket with 360° pan swivel & 90°tilt ability. Suitable for Camera Size 108(w) x 75(H) x 180(L) mm
Usually ships within 2 weeks
Sheet of 28 reflectors, suitable for ceiling heights of 8-10m
Pair of wall mount kits for MRMC QRS rail, 1 set per 2m
Extension Cable 5m
Wall Mount (Black) for CV612/CV620/CV630/CV730 cameras
Usually ships within 2 weeks
Wall Mount (White) for CV612/CV620/CV630/CV730 cameras
Usually ships within 2 weeks
power BOX
Usually ships within 2 weeks
The WM-11 is a professional wall mount which is designed for Datavideo Robotic Pan Tilt Head PTR-10/PTR-10T series and Datavideo PTZ camera series including PTC-150/PTC-150T.
Usually ships within 3 to 4 weeks
The mount is designed to support the Canon CR-N300 PTZ camera mounted on a wall or other surface.
Usually ships within 2 weeks
Usually ships within 2 weeks
Extension Cable 2m
Sheet of 15 reflectors, suitable for ceiling heights of 10-14m
Omnidirectional Microphone Speaker with USB & Bluetooth
BirdDog Junction Box, for PTZ Keyboard RS232/422/485 connection and power supply
Usually ships within 1-2 weeks
Webcam USB-C (UVC) to HDMI 2.0 Adapter Supports up to 4K
Adaptor cable with angled connector for Canon zoom lenses to avoid collision with light weight support (SMS 9 8-pin connector)
The ECE-R22 Extension Cable from Fujinon is designed for use with model WVE-550 cameras. It features a connector for the WVE-550 on one end and a D24 type connector on the other end.
BirdDog Corner Mount Adapater for A200 / A300
Usually ships within 1-2 weeks
BirdDog A200 Ceiling Mount Kit
Usually ships within 1-2 weeks
Adaptor cable with connector with angle for Fujinon video zoom lenses to avoid collision with light weight support (Hirose 12 pol connector)
LEMO XLR break-out cable (for P240)
Usually ships within 1-2 weeks
V-lock battery mount (for X120, P100, P110, P120)
Usually ships within 1-2 weeks
Flexible cable for Fujinon Remote Control Focus.
C-clamp V-lock battery plate (for all cameras)
Usually ships within 1-2 weeks
Lumens VC-WM12 Wall mount for PTZ cameras, Black. Secure wall mount for 4K/Full HD PTZ Cameras with cable cover.
Lumens VC-WM12 Wall mount for PTZ cameras, White. Secure wall mount for 4K/Full HD PTZ Cameras with cable cover.
Extension Cable 1m
Wall Mount for PTZ camera Black
Usually ships within 3 to 4 weeks
Wall Mount for PTZ camera White
Usually ships within 3 to 4 weeks
BirdDog A200 Wall Mounting Kit
Usually ships within 1-2 weeks
Ceiling Mount for P4K
Usually ships within 1-2 weeks
Wall Mount for P4K
Usually ships within 1-2 weeks
FE-xxx accessory mounting plate
Release plate for PTZ cameras
BirdDog RS422/232 RJ45 Adaptor + RJ45 Coupler
Usually ships within 1-2 weeks
Mount your Cinema Line FR7 PTZ camera on the ceiling using this black Bracket from Sony. This two-piece bracket mount includes a safety cable, a lens release button cover, and a set of screws.
Mount your PTZ camera on a ceiling with this Ceiling Mount from BirdDog. Designed to work with the X1 and X1 Ultra cameras, the mount is elegantly finished in white to match your camera.
Usually ships within 1-2 weeks
Mount your PTZ camera on a ceiling with this Ceiling Mount from BirdDog.
Usually ships within 1-2 weeks
Mount your PTZ camera on a wall with this Wall Mount from BirdDog. Designed to work with the X1 and X1 Ultra cameras, the mount is elegantly finished in black to match your camera.
Usually ships within 1-2 weeks
Mount your PTZ camera on a wall with this Wall Mount from BirdDog. Designed to work with the X1 and X1 Ultra cameras, the mount is elegantly finished in white to match your camera.
Usually ships within 1-2 weeks
Vantage 2.5mm serial cable
Control your PTZ camera wirelessly with this Infrared Remote Control from BirdDog. The unit is designed to work specifically with the X1 and X1 Ultra cameras.
Usually ships within 1-2 weeks
Wall Mount for P100/P200/P400 (White)
Usually ships within 1-2 weeks
Ceiling Mount for P100 / P200 / P400 - White Colour
Usually ships within 1-2 weeks
Wall Mount for X & P
Usually ships within 1-2 weeks
Power Adapter 12Vdc (X1 And X1 Ultra)
Usually ships within 1-2 weeks
Celling mount bracket for PTZ cameras
Wall mount bracket for PTZ cameras
Wall mount bracket for PTZ cameras
Celling mount bracket for PTZ cameras
BirdDog RJ45 to RS232 Control Cable Adapter
Usually ships within 1-2 weeks
BirdDog RJ45 to RS422/232 Control Cable Adapter for P100 / P200
Usually ships within 1-2 weeks
BirdDog 8 Pin Mini Din TO Phoenix Control Cable Adapter
Usually ships within 1-2 weeks
BirdDog RS422/232 RJ45 Adaptor for PTZ Keyboard RJ45 RS232/422/485 wire connection
Usually ships within 1-2 weeks
Ceiling Mount for CV605 Cameras (Black)
Usually ships within 2 weeks
Wall Mount for CV605 Cameras (Black)
Usually ships within 2 weeks
Wall Mount for CV605 Cameras (White)
Usually ships within 2 weeks
TLC-20 power supply
Monitor Mount Bracket
Wall mount bracket for PTZ cameras
Wall mount bracket for PTZ cameras
Professionell Wall Mount Bracket for all RGBlink PTZ Cameras silver grey, incl. screws
Vantage Lanc cable
TLC-10E IR remote controller
IR remote controller
BirdDog RJ45 Coupler for PTZ Keyboard RJ45 network control cable extension
Usually ships within 1-2 weeks
BirdDog Network Control Cable for PTZ Keyboard control connection
Usually ships within 1-2 weeks
Edge Analytics Appliance PTZ Auto Tracking License