Side flag kit assy MB-250/300/310/315/320/325, DVMB-WA MKII (3 pcs.)
1 pieces in stock
Side flag kit MB4XX. Consisting of two retractable side doors.
1 pieces in stock
Vocas Side flag kit MB-350. (2 pcs.)
1 pieces in stock
15 mm General lens support including 4 adapters
2 pieces in stock
19mm Adaptor for Swing Away MKII
1 pieces in stock
Filter frame 150 mm wide 5x5 for MB-4XX.
2 pieces in stock
Aluminum filter holder 4x5
1 pieces in stock
Aluminum filter holder 4x5,65
1 pieces in stock
Filter frame 121 mm wide 4x5,65 for MB-4XX, as spare. 1pc.Included in MB-450
1 pieces in stock
19mm to 15mm Adapter.
3 pieces in stock
Intermediate ring diameter 130:110 (thread) for use of insertrings 110:xx mm (f. MB456 + 450W)
1 pieces in stock
Adapter Plate for 15mm rails.
1 pieces in stock
R4 Screw-In Reduction Ring 114 mm-105 mm
1 pieces in stock
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-136mm)
1 pieces in stock
Lens Clamp Adapter(114mm)
1 pieces in stock
Zip Box Adapter Rings (49, 52, 55, 58, 62, 67, 72, 77mm)
1 pieces in stock
1 pc. Length 250mm
1 pieces in stock
1 pc. Length 210mm
2 pieces in stock
SmallRig Filter Tray (4 x 5.65) 3319 forms part of Mini Matte Box 3196 and allows for quick installation of 4 x 5.65" plug-in filters of 4mm in thickness.
1 pieces in stock
The LMB 4x5 set to fulfill all needs with the most modular matte box - from single stage, to three stage, to bottom and top lightweight mounted, to the full-blown version with swing-away tilt module, all carbon fiber flags (top and side) and both extra filter stages (rotatable and non-rotatable)
This FreeStyle Air RGB LED Light Panel DMX System Universal Kit from Kino Flo features the 39.5 x 13 x 2" FreeStyle Air panel and a compatible 140 LED DMX controller
Delivery time of 4 to 6 weeks
The Upgrade Set LMB-25 to LMB 4x5 Pro comes in a foam insert that fits perfectly into any kind of Peli Case 1560
This set inlcudes 13 different clamp adapters to use with LMB 4x5
The 11 different included clamp adapters cover the most common lens diameters from 95 mm to 165 mm.
This set includes one Diopter Stage, one Diopter Adapter and three Diopter Frames including all pouches. With this set rentals could offer their diopter set (+0.5, +1, +2 each in a Diopter Frame and +3 in a Diopter Stage) for best storage to avoid any damages on the glass.
RMT Base Unit with single 4x5.650 Tiffen Ultra-Thin Circular Polarizer. Variable ND and Colour FX (Warm/Cold)
Usually ships within 2 to 5 weeks
The 5-Axis Diopter Holder Kit from Vocas pairs the 15mm LWS rod-compatible diopter holder with a 19mm studio rod adapter. Use this versatile rig to create focal plane effects with a single 138mm round diopter.
Clamp-On MatteBox MB 565 Double Kit, for Cine FullFrame cameras, incl. French Flag (501-26), 2 filterholders multiformat 5.65x5.65/ 4x5.650 (510-06) each independently 360° rotatable, clamp adapter with diameter 150mm, 3 step-down rings diameter 150 to: 136mm (511-136), 114mm (511-114), 104mm (511-104), in case
Clamp-On MatteBox MB 565 Double Kit, for Cine FullFrame cameras, includes: *Clamp adapter with ? 150mm * 501-26: French Flag * 510-07: 2 Filterholders multiformat 4x5.65/4x4 - short -, each independently rotating 360° * 3 step-down rings ?150 to: 511-104, 511-114, 511-136 * 565-CASE: Case with insert
A set with the 4 most popular LMB 4x5 clamp adapters and in addition the 143mm adapter which provides the possibility to attach the LMB 4x5 on 15mm lightweight support rods. Includes: 1x K2.0014168; 1x K2.0014396; 1x K2.0014409; 1x K2.0014439; 1x K2.0014376; 1x K2.47190.0; 1x K2.65045.0; 1x K2.65271.0; 1x K2.65165.0; 1x K2.0013427.
The 5-Axis Diopter Holder from Vocas is a single 138mm round filter holder compatible with 15mm LWS rod systems.
Rotating Multi Tray (RMT) with 138mm geared Tiffen Ultra-Thin Circular Polarizer Base Unit
Usually ships within 2 to 5 weeks
This module offers a comfortable swing-away with extension for easier lens changes, as well as an integrated tilt module for 10° up and down adjustments to avoid unwanted reflections. For use with 15mm studio rod system.
This module offers a comfortable swing-away with extension for easier lens changes, as well as an integrated tilt module that allows 10° up and down adjustments to avoid unwanted reflections. For use with 19mm studio rod system.
The Extra Rotatable Filter Stage gives the possibility to rotate an additional 6.6 inch x 6.6 inch filter 360°. It attaches to the Basic Module by sliding to the rear and fixed by two thumb screws without the need for any tools.
The carbon fiber Side Flags, each including one extendable wing to prevent possible image quality loss caused by stray light.
Clamp-On MatteBox MB 565 Double, for Cine FullFrame cameras, incl. French Flag (501-26), 2 filterholders multiformat 4x5.650 /4x4 (510-07) each independantly 360° rotating, clamp adapter w. ? 150mm
Clamp-On MatteBox MB 565 Double, for Cine FullFrame cameras, incl. French Flag (501-26), 2 filterholders multiformat 5.65x5.65/ 4x5.650 (510-06) each independently 360° rotatable, clamp adapter with diameter 150mm
The Rota Pola Filter Frame 6.6x6.6 has the same width as a regular F1 filter frame and therefore, only takes the space of one filter in a filter stage. Ships in a filter pouch.
Clamp-On MatteBox MB 565 Single, for Cine FullFrame cameras, incl. French Flag (501-26), 1 filterholder multiformat 5.65x5.65/ 4x5.650 (510-06), clamp adapter with diameter 150mm
Clamp-On MatteBox MB 565 Single, for Cine FullFrame cameras, includes: *Clamp adapter with ? 150mm 501-26: French Flag 501-07: 1 Filterholders 4x5.65/4x4 short, each independently 360°rotatable
The diopter stage can be used at the back of a 6.6 inch x 6.6 inch clip-on a matte box, or independently with a rear-mounted clamp adapter. Diopters up to +3 can be fitted, and the position of split diopters can be adjusted with an integrated friction wheel. As with the diopter frame, a safety device and ? inch mounting threads are included. Compatible...
MMB-2 Basic Module double 4x5,65
Complete Swing-Away Unit for diameter 15mm rods for MB 565
Complete Swing-Away Unit for diameter 19mm rods for MB 565
The carbon fiber Top, Bottom Flag including two extendable wings to prevent possible image quality loss caused by stray light. It can be fitted to the top or at the bottom of the LMB 6x6 Basic Module and will cover the opening of the sunshade 100% for best protection during a break.
The module offers a comfortable swing-away with extension for easier lens changes, as well as an integrated tilt module for 10° up and down adjustments to avoid unwanted reflections
A set with the 4 most popular LMB 4x5 clamp adapters. Includes: K2.0014396 1x LMB 4x5 Clamp Adapter 114mm; K2.0014409 1x LMB 4x5 Clamp Adapter 110mm; K2.0014439 1x LMB 4x5 Clamp Adapter 95mm; K2.0014376 1x LMB 4x5 Clamp Adapter 80mm
A set of two carbon fiber side flags, each extendable on the top
Side Flag Set for MMB-2. Includes: K2.66150.0 1x Side Flag left; K2.66148.0 1x Side Flag right; K2.66134.0 2x Side Flag Holder.
R1 138mm Filter Ring diameter 125 mm - For Angénieux 25-250HP with rubber sleeve and connection ring.
To upgrade the LMB-25 on the platform of the new LMB 4x5. Kit includes: K2.0013825 1x LMB 4x5 Flag Holders; K2.0015140 1x LMB 4x5 backplate with filter guides
An optional 360° rotatable third filter stage for the LMB 4x5, with integrated tray catcher. Can be used as a stand-alone filter stage with all LMB 4x5 clamp adapters
Filterstage for 2 Filterholder 6.6x6.6 rotating (2x geared FH) - to add on MatteBox (instead of Standard 610-CF/ST) - Filterholder is not included
The Rota Pola Filter Frame 4x5,65 has the same width of a regular F4 filter frame and therefore only takes the space of one filter in a filter stage. The glass inside is a round shaped circular polarizer which takes less than 1.2 stops of light
The diopter stage can be used at the back of a 4 inch x 5.65 inch clip-on a matte box, or independently with a rear-mounted clamp adapter. Diopters up to +3 can be fitted, and the position of split diopters can be adjusted with an integrated friction wheel. As with the diopter frame, a safety device and ? mounting threads are included
The diopter frame allows 6 inch diopters of up to +1 and in combinations with the Diopter Adapter 6in to 138mm, up to +2 Diopter. The frame is compatible with the ARRI LMB 6x6, LMB-6 and SMB-1. The frame has the width of two 6.6 inch x 6.6 inch filter frames and fits into a 2- or 3-filter stage.
The Extra Non-Rotatable Filter Stage makes it possible to use an additional 6.6 inch x 6.6 inch filter. It attaches to the Basic Module by sliding to the rear and fixed by two thumb screws without using any tools. For extreme lightweight applications such as gimbal and Steadicam the separate single filter stage works perfectly in conjunction with any...
Reduction/Clamp-On Ring Set Cine Pro. Includes: K2.66149.0 1x Reduction/Clamp-On Ring 110mm, Cooke S4; K2.66146.0 1x Reduction/Clamp-On Ring 104mm,UP LDS; K2.66147.0 1x Reduction/Clamp-On Ring 95mm, UP; K2.66190.0 1x Reduction/Clamp-On Ring 87mm; K2.66160.0 1x Reduction/Clamp-On Ring 80mm.
A carbon fiber flag, with two extensions,which can be mounted at the top or the bottom of the LMB 4x5 - compatible with LMB-5, LMB-15, and LMB-25
The Swing away bracket features a unique design that allows the user to move the mattebox forward and swing it away from the lens, by rotating one single knob.
Still Lens Clamp-On Set Pro for still photo lenses threads. Includes: K2.66140.0 1x Still Lens Clamp-On Ring 52; K2.66143.0 1x Still Lens Clamp-On Ring 58; K2.66138.0 1x Still Lens Clamp-On Ring 62; K2.66126.0 1x Still Lens Clamp-On Ring 67; K2.66137.0 1x Still Lens Clamp-On Ring 72; K2.66136.0 1x Still Lens Clamp-On Ring 77; K2.66139.0 1x Still Lens...
Micro Four Third (MFT) to PL adapter including 15mm support.
Light Protection Ring Set Pro. Includes: K2.66156.0 1x Connection Ring flexible 52; K2.66157.0 1x Connection Ring flexible 58; K2.66154.0 1x Connection Ring flexible 62; K2.66152.0 1x Connection Ring flexible 67; K2.66153.0 1x Connection Ring Flexible 72; K2.66151.0 1x Connection Ring flexible 77; K2.66155.0 1x Connection Ring flexible 82; K2.66161.0 1x...
UMB-1 Universal Mattebox (Bellows Set)
Usually ships within 8 to 12 weeks
R1 6 Filter Ring diameter 144,4 mm - For Cooke 20-100.
R1 138 mm Filter Ring diameter 87 mm (no reduction rings) - For ZEISS Vario Sonnar T2/10-100II - and T2.2/11-110.
Filterstage for 1 geared FH 6.6x6.6 rotating - to add on MatteBox (instead of Standard 610-CF/ST) - for use of extreme Wide Angle Lenses - FH is not included
F2 Filter Frame round - For round filter diameter 138mm.
The diopter frame allows 138 mm diopters of up to +2 to be used in a lightweight matte box such as the ARRI LMB-25. The frame has the width of two 4 x 5.65 filter frames and fits into a 2- or 3-filter stage. A safety mechanism prevents the diopter from falling out of the frame during exchange, while two ? threads permit the frame to be attached to an...
An optional non-rotatable third filter stage for the LMB 4x5. Can be used as a stand-alone filter stage with all LMB 4x5 clamp adapters. The LMB 4x5 sunshade can be mounted directly to the front of the filter stage
Allows one or two glass filters to be stacked and angled, providing a quick and elegant solution for reducing unwanted reflections. Fits in a 2-stage slot of a filter stage
The triple filter frames accommodate two or three filters in a single filter frame taking two regular matte box slots and prevent unwanted reflections between glass filter surfaces. Although compatible with some legacy ARRI matte boxes, the triple filter frame achieves maximum benefits when used in combination with the tilting matte box SMB-1. Fits in a...
Set of Side Wings for MB 601/602 (1 pair for spare)
Triple filterstage - rotatable - without Filterholders - for MB 805
R12 Clamp-OnRing 156-150 mm - for use with Cooke 18-100 mm + 25 -250 mm Cinetal + Arri VPs
UMB-1 Universal Mattebox (Clamp On Set)
Usually ships within 8 to 12 weeks
R1 138 mm Filter Ring diameter 80 mm - For ZEISS Standard Primes with rubber sleeve and connection ring. When using physically short Lenses such as ZEISS Standards - K2.34131.0 - R1 Intermediate Ring is required in addition.
2- PARt bellow ring (R1)designed to follow the tilt movement of the SMB-1. Compatible with all R8 screw-on rings (and R4 screw-on rings via K2.66095.0)
R1 6 Universal Filter Ring diameter 150mm - For VP1 - VP2 - VP3 - Cooke18-100 and Cinetal 25-250. - Takes reduction rings size R8
R1 6 Filter Ring diameter 114 mm - With rubber sleeve for Master Prime Lenses - UP14 mm - UP180mm - LDS-UP 14 mm and LDSUP 180 mm. Takes reduction rings size R4
R1 138mm Filter Ring diameter 95 mm - For Ultra Primes 16-135mm with rubber sleeve and connection ring. Not for use with wide angle video zooms.
R1 138mm Filter Ring diameter 114 mm - With rubber sleeve for Master Prime Lenses - UP14mm - UP180mm - LDS-UP 14 mm and LDSUP 180 mm. Takes reduction rings size R4
R1 Reflex Prevention Ring diameter 156mm - For UP 10 mm - UP 12mm and LDS-UP 12 mm.
Hand Grip Set for MMB-2 (pair)
Right handed ergonomically shaped wooden handgrip.Equipped with Arri style rosette.
Wooden handgrip (left hand).
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 134mm Back
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 114mm Back
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 110mm Back
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 95mm Back
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 80mm Back
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 85mm Back
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
MBS-100 Type I, Mattebox support 15 mm. For Panasonic AGHPX300
Wireless Control Kit for Tilta Mirage
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Set of Side Wings for Mattebox Academy 456 - S16/4:3 - SD 411
Filter orients vertically when inserted from above.
With rubber sleeve for UP 14 mm - UP 180mm - LDS-UP 14 mm and LDS-UP 180mm. Not compatible with Master Prime Lenses 14 mm and 16 mm. Takes reduction rings size R4
2-part bellow ring (R2) designed to follow the tiltmovement of the SMB-2. Compatible with all R4 screw-on rings.
Allows one or two glass filters to be stacked and angled, providing a quick and elegant solution for reducing unwanted reflections. Fits in a 2-stage slot of a filter stage and is compatible with LMB-25, LMB-15 and LMB-5
MB-600 Double rotatable filter stage
F2 Filter Frame 4x4 - geared
R7 Clamp-On Ring 130-85 mm - JVC HD-100
R8 Screw-In Reduction Ring 150-125 mm
The triple filter frames accommodate two or three filters in a single filter frame taking two regular matte box slots and prevent unwanted reflections between glass filter surfaces. Although compatible with some legacy ARRI matte boxes, the triple filter frame achieves maximum benefits when used in combination with the tilting matte box SMB-2. Fits in a...
R2 138 mm Filter Ring diameter 114 mm - Compatible with Master Prime Lenses - UP 14mm - UP 180 mm - LDS-UP 14 mm and LDS-UP 180 mm. Takes reduction rings size R4
UMB-1 Universal Mattebox (Swing Away Arm Only)
Usually ships within 8 to 12 weeks
Mattes for MMB-2 (5 pieces)
R1 138 mm Filter Ring diameter 161 mm
Rail support for Blackmagic Pocket Cinema Camera
R1 Reflex Prevention Ring diameter 150mm - For VP1 - VP2 - VP3 - Cooke18-100 and Cinetal 25-250.
R1 Reflex Prevention Ring diameter 134mm - For Arri/FUJINON Alura Zooms.
R1 Reflex Prevention Ring diameter 136mm - for Canon FK 14.5-60 - FK 30-300
Internal focus lenses only - Compatible with Master Prime Lenses - LWZ Alura - UP 14 mm - UP - 180 mm - LDS-UP 14 mm and LDS-UP 180 mm - also compatible with wide-angle video lenses. Not compatible with external focus lenses. - For use with MMB-1 top load.
For UP 16 mm-135 mm - 16 mm zooms and medium-focal-length video zooms. Notfor use with wide-angle video zooms.
For ZEISS Vario Sonnar. Takes reduction rings size R6
Filter Frame for LMB 6x6 and LMB-6.
F5 Filter Frame Combo 4x5.65/5x5 - Accepts 4x5.65 filter horizontally (4x5.65filter orients horizontally when inserted from above) or vertically or 5x5 filter (5x5 filter orients vertically when inserted from above).
Set of SideWings for wideangle housing - large
Filterholder 6.6x6.6 geared - as spare
F2 Filter Frame 4x4 - non-geared
Filter orients horizontally when inserted from above.
F4 Filter Frame Combo 4x5,65/4x4 - For use with MB-29
Double filterstage - rotatable - without Filterholders - for MB 805
Side wings incl. pivot mechanism for MB 450
MB-600 Single rotatable filter stage
MBS-100, 15 mm lightweight support for larger cameras. Required for DSR-250/300/500 and JVC GYDV550/700 and JVC GY-HD2XX.These supports comes with 2 pair of 15 mm rails.
MBS-100 inchType G4 inch 15 mm rail support, with integrated shoulder bracket.
RED epic 15mm LW support / BP-18 adapterBP-18 adapter
MBS-100 type N mattebox support
F1 Filter Frame 4 inch x 5.65 inch for 6.6 inch x 6.6 inch, non geared for 6.6 inchx6.6 inch Matte Boxe
A tool-less screw in 19 mm studio support adapter which fits on either the LMB 4x5 15 mm lightweight console or to the LMB 4x5 swing away tilt module
A tool-less, screw-in 15 mm studio support adapter that fits on either the LMB 4x5 15 mm lightweight console or the LMB 4x5 swing-away tilt module
Still Lens Clamp-On Set Basic for still photo lens threads. Includes: K2.66137.0 1x Still Lens Clamp-On Ring 72; K2.66136.0 1x Still Lens Clamp-On Ring 77; K2.66139.0 1x Still Lens Clamp-On Ring 82.
Light Protection Ring Set Basic. Includes: K2.66153.0 1x Connection Ring Flexible 72; K2.66151.0 1x Connection Ring flexible 77; K2.66155.0 1x Connection Ring flexible 82; K2.66161.0 1x Flexible Light Protection.
The Vocas 15mm LW Swing Away Bracket attaches directly to the rear of the MB-430 Matte Box and allows the user to mount the matte box onto 15mm lightweight rods.
Dovetail shoulder support
A set of 5 hard mattes with different anamorphic openings that can be clicked into the sunshade of the LMB 6x6 to prevent image quality loss caused by stray light.
A set of 5 hard mattes with different spherical openings that can be clicked into the sunshade of the LMB 6x6 to prevent image quality loss caused by stray light.
F5 Filter Frame Combo 5.65x5.65/ 5x6 H - Accepts 5.65x5.65 filter or 5x6 filter horizontally (5x5.6 filter orients horizontally when inserted from above).
F4 Filter Frame Combo 4x5,65/5x5 - For use with MB-29
Filter orients horizontally when inserted from above.
The Tilt and Flex Adapter is a flexible rubber donut compatible with lens diameters from above 80mm to less than 156mm.
Side wings for MatteBox 450
Aluminum tilting filter 4" x 5.65" horizontal unit for MB-450 (fits in the MB-450 hood)
Filter orients vertically when inserted from above.
For use in MB-19 rear stage. Filter orients vertically when inserted from above.
F5 Filter Frame 4x6 V - Filter orients vertically when inserted from above.
Traditional film-style 4x5.65 filter frame withlight shielding all around filter (filter orients horizontally when inserted from above).
R7 Clamp-On Ring 130-98 mm
Intermediate Ring 165:142,5mm for use of rubber bellows or intemediate rings 142,5:xxmm
Set of Mask 16:9 complete - 5 units for focal length of F=[mm]: 4,8/10/20/30/48 (suitable for MB 415 - 412 - 805 - 840)
For LMB 6x6 and LMB-6. The Adapter is available for the Angenieux Optimo 24-290 and 28-340.
Works with ARRI standard R2 rings when either the LMB 15mm or 19mm Studio Rod Adapter is attached at the bottom of the LMB 6x6 Clamp Adapter 143 mm. Compatible with LMB 6x6 and LMB-6.
For LMB 6x6 and LMB-6, 160 gr, 200x200x10 mm
For LMB 6x6 and LMB-6, 162 gr, 200x200x10 mm
For LMB 6x6 and LMB-6, 170 gr, 200x200x10 mm
Works with ARRI standard R1 rings when either the LMB 15mm or 19mm Studio Rod Adapter is attached at the bottom of the LMB 6x6 Clamp Adapter 165mm. Compatible with LMB 6x6 and LMB-6.
For LMB 6x6 and LMB-6, 183 gr, 200x200x10 mm
For LMB 6x6 and LMB-6, 188 gr, 200x200x10 mm
For LMB 6x6 and LMB-6, 196 gr, 200x200x10 mm
Screws into R1 or R2 138mm round filter rings and reduces to 4.5 round. Includes threaded retaining ring for 4.5 round. Not for use with 6 filter rings.
F5 Filter Frame 4x5.65 for 16x9 Wide-Angle - For MB-20 16x9 Wide only
for all 6.6x6.6 frames - fits horiz. or vert.into 6.6x6.6 frames frames and reduces down to be used with 4x5.65 filters
The diopter adapter is compatible with LMB 6x6 Diopter Stage and Diopter Frame 6 inch and allows the use of 138 mm close-up diopters.
For LMB 6x6 and LMB-6, 180 gr, 200x200x10 mm
For LMB 6x6 and LMB-6. Fits all R12 clamp-on reduction rings (please see ring section)
The Vocas Side Flag Kit for MB-350 offers protection from undesired lens flare effects, especially in bright artificial lighting and sun and is ideally suited for the MB-350 mattebox.
Filterholder 6x6 for MB 601/602
A flexible rubber donut adapter to use with lenses from small to large diameters (62-143mm), for use with LMB 4x5 swing-away tilt module or with lenses where lens elements are extending
Adapter Ring R1-R3 - Snaps into size R1 mount and allows use of size R3 rings.
F4 Filter Frame 5x5 - For use with MMB-2 top load - LMB-5 - LMB-15 - LMB-25 - MB-19
For vertical filter when inserted from above.
to be used with: MB-14 Filter Stages (for filter stage K2.42293.0 use F6) or - MB-28 Filter Stage - K2.66031.0 (for filter stage K2.66032.0 use F5)
F5 Filter Frame Combo 4x5.65 H/4x4 - With cut outs to center 4x4 filter (4x5.65 filter orients horizontally when inserted from above).
Remotely control exposure and focus via your existing VND Module, Nucleus-Nano, or Nucleus-M with the Wireless Controller for Mirage Matte Box from Tilta. A focus puller can work at a 300" distance, seated behind a monitor, adjusting the motorized controls, giving the camera operator room to maneuver.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Insert Filterholder 5.650x5.5650 to use inside FH 6.6x6.6 (610-01 - 610-02)
Insert Filterholder 4x5.650 (4x4) to use inside FH 6.6x6.6 (610-01 - 610-02)
This set of Mattes includes 5Mattes and fits to following Matte Boxes: LMB-5 - LMB-15 - LMB-25 - MB-19.
This set of Mattes includes 5 anam. Mattes and fits to following Matte Boxes: LMB 4x5, LMB-5, LMB-15, LMB-25, MB-19.
Traditional film-style 4x5.65 vertical filter frame with light shielding all around filter(filter orients vertically when inserted from above).
Filterholder 6.6x6.6
A pair of flag holders that can be mounted on the top, bottom, or sides of the LMB 4x5 compatible with LMB-25
The Dual 138mm Adapter Ring from Vocas is compatible with the modular Vocas 5-Axis Diopter Holder. Made from industrial plastic, this ring screws into the holder to retain two Dual 138mm diopter (close-up) filters.
Adjustable handgrip extender equiped with standard rosettes
F4 Filter Frame Combo 4x4/4.5 round - For use with MMB-2 only
For 3/8 inch accessories such as ultrasonic devices-compatible with LMB-25/LMB-6 with the additional sliding possibility for a perfect positioning
The 138mm Adapter Ring from Vocas is compatible with the modular Vocas 5-Axis Diopter Holder. Made from industrial plastic, this ring screws into the holder to retain one 138mm diopter (close-up) filter.
19mm Rod Adapter for MB-T04 Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Separate Filter stage for MB565, without filterholder
Single filterstage - rotatable - up to focal length 4.5mm (zoom) - without Filterholder - for MB 805
UMB-1 Universal Mattebox (15mm Studio Adapter)
Usually ships within 8 to 12 weeks
UMB-1 Universal Mattebox (19mm Adapter)
Usually ships within 8 to 12 weeks
The 4.5" Adapter Ring from Vocas is compatible with the modular Vocas 5-Axis Diopter Holder. Made from industrial plastic, this ring screws into the holder to retain one 4.5" diopter (close-up) filter.
Pivot Mechanism for Side Wings at MB 565 (set for left a. right)
Quick release dovetail plate
Wireless Motor for Tilta Mirage
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Wireless Motor Kit for Tilta Mirage
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
R9 Adapter Ring 143-130 mm - step down to R7 clamp-on Rings 130 mm possible
To use with R2 rings in combination with the LMB 4x5 15 mm LWS console or with R11 clamp-on rings (diameter 143 mm tomm). The LMB 4x5 15 mm LWS console can be mounted either on top or at the bottom compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For Vario Sonnar and Cooke Mini S4/i lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For Canon Zoom 14.5-60 mm, 30-300 mm, Angenieux 25-250 mm compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For ALURA Studio Zooms 18-80 mm, 45-250 mm and Fujinon Premier zoom lenses - compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For Zeiss Standard and HS (Super Speed) lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For Master Primes, Master Anamorphics, UP 14 mm, UP 180 mm, LDS-UP 14 mm, LDS-UP 180 mm, ALURA Lightweight Zooms, and many other zoom and prime lenses - compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For Cooke S4 lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For LDS Ultra Prime 16-135 mm, Cine Xenar III compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For Ultra Prime 16-135 mm, Leica Summilux and Summicron compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For Fujinon MK 18-55 mm, Celere Prime lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
For Angenieux Optimo 24-290 mm and 28-340 mm may vignette in wide angles. Compatible with LMB 4x5 basic module and LMB-15. Not compatible with LMB-5, LMB-25 and extra filter stages LMB 4x5
For Schneider Xenon FF Prime lenses compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
It fits with all lenses with a 156mm front diameter such as the ARRI Signature Zoom 16-32/T2.8 or 65-300/T2.8. With the 16-32mm, Signature Zoom the clearance is limited at wide-angle in 3-stage configurations depending on the shooting format. The adapter is compatible with the LMB 4x5 in 2-stage (Basic Module) and LMB-15. It is not compatible with LMB-5...
For Hawk 60-135 mm, Cooke S4/i 150 mm compatible with LMB 4x5, LMB-5, LMB-15, and LMB-25
15 mm Lens mount adapter support
Rubber Bellows Retaining Ring diameter 142.5:95 mm for Fujinon/Canon WA zoom lens F4.5
Rubber Bellows RetainingRing diameter 142,5:114mm for Zeiss CPII - Canon Cine Primes - Sony PL primes - Zeiss LWZ-1 - Alura LWZ 15.5-45/30-90
Rubber Bellows Retaining Ring diameter 142,5:104mm with 41mm tube for Cine-Xenar II lenses on MatteBox 602 - 840 - 805 and 415
Rubber Bellows Retaining Ring diameter 142.5:100 mm
Rubber Bellows Retaining Ring diameter 130:114 mm with 7 mm tube (e.g. for Zeiss CPII)
Rubber Bellows Retaining Ring diameter 130 :110 mm - for MB 456 Academy with thread for all 110 mm Insert Rings.
Rubber Bellows Retaining Ring diameter 142.5:110 mm
Rubber Bellows Retaining Ring diameter 130:104mm with 41mm tube for Schneider Cine-Xenar lenses serie I & II with MB456.
143mm Flexible Donut ring. Max lens diameter 132mm
A screw-in standard 15 mm lightweight support console, compatible with both the LMB 4x5 143 mm clamp adapter and the LMB 4x5 tilt and flex adapter
Lightweight Support Console for MMB-2
Designed for the Flexible Sunshade LMB 4x5. The LMB side flag holders, which are an alternative to the existing small ones used with the LMB 4x5, offer more real estate at the top and the bottom. Filter tags, which are quite often attached to the sunshade, will not stick to rubber but perfectly to the extended space on the new LMB side flag holders.
Flexible Shaft for geared Filterholder
Single filterstage, empty, for FH wide 150mm, for MB 565
Rod Clamp diameter 19mm with screws for MB 565
SW Arm diameter 15mm MB 565 (only lower support arm)
SW Arm diameter 19mm MB 565 (only lower support arm)
Set of Masks for MB 601/602. Format 16:9 - for F = 8/12/20/40mm.
Rod Clamp diameter 15mm with screws for MB 565
15mm offset High bracket for shoulder support.
The Vocas Flexible Adaptor Ring Kit (144 mm), which includes an adaptor ring and holder for an additional 138 mm round filter, is compatible with the MB-450 mattebox. It also includes exchangeable flexible soft rubber rings (donuts).
UMB-1 Universal Mattebox (Side Flags, Left & Right)
Usually ships within 8 to 12 weeks
UMB-1 Universal Mattebox (Extra Stage Set)
Usually ships within 8 to 12 weeks
Zip Box Pro 4x5.65 (80mm Clamp On Back Only)
Usually ships within 8 to 12 weeks
Zip Box Pro 4x5.65 (87mm Clamp On Back Only)
Usually ships within 8 to 12 weeks
Zip Box Pro 4x5.65 (95mm Clamp On Back Only)
Usually ships within 8 to 12 weeks
Zip Box Pro 4x5.65 (100mm Clamp On Back Only)
Usually ships within 8 to 12 weeks
Zip Box Pro 4x5.65 (114mm Clamp On Back Only)
Usually ships within 8 to 12 weeks
Zip Box Pro 4x5.65 (104mm Clamp On Back Only)
Usually ships within 8 to 12 weeks
15 mm Lens support including lens strap
The Vocas 15mm Bar Adapter acts as a link between a camera matte box and a rail support. This adapter can be used to mount Vocas MB-4xx series matte box on a rail support.
For use with LMB 4x5, LMB-25, MB-19
The diopter adapter is compatible with both diopter stage and diopter frame 138mm and allows the use of 4,5 inch close-up diopters
This ring has been designed around the Canon CN-E 14 mm T3.1 wide-angle prime lens. The clamp-on ring allows the Lightweight Matte Boxes LMB-4A and LMB-6 to cover up to the full frame 24x36mm sensor size (FF35) of EF mounted cameras such as Canon 1Dc - 1D and 5D MkIII. The Canon lens is fitted with a front locating pin - which is compatible with the...
F4 Filter Frame 5,65x5,65 - For use with MMB-1 topload
Rubber Bellows Retaining Ring diameter 150:114mm
Rubber Bellows Retaining Ring diameter 150:110mm
Rubber Bellows Retaining Ring diameter 150:95 mm WW (Canon + Fujinon HD wide angle lenses)
UMB-1 Right Side NATO Rail
Usually ships within 8 to 12 weeks
The Vocas 4th Tilted 4x5.65 Filter Holder for MB-455 installs into the hood of the Vocas MB-455 Matte Box and provides additional flair reduction.
4th filterholder for MB-450
Stack-on Filterholder Compartment - rotating 360° for diameter 138mm Filters and 4x4 Filterholder (to be added at Mattebox back plate dia. 142.5mm please order extra Filterholder wide 110mm)
Retaining Ring diameter 142,5:AG-3DA1 Panasonic 3D camera
Filterholder 4x5.650 (width 110mm - vertical)
Filterholder multi-format 5x5 and 4x5.650 vertical or horizontal filters
Filterholder multi-format 4x5.650 and 4x4 filters horizontal (150mm wide, short shaft) shaded at the top and bottom for use with MB 565
Filterholder multi-format 5.650x5.650 and 4x5.650 vertical Filters (short shaft)
Filterholder multi-format for 4x4 and 4x5.650 horizontal filters (150mm wide)
Filterholder multi-format 5.650x5.650 and 4x5.650 vertical Filters
Filterholder 5x6 vertical (150mm wide)
Filterholder multi-format 5x5 and 4x5.650 horizontal filters (150mm wide)
Set of Mask 4:3 complete - 5 units for focal length of F=[mm]: 4,8 / 10 / 20 / 30 / 48 (suitable for housing MB 415 - 805 - 840)
Retaining Ring diameter 130:104 (long) f. Cine Xenar lenses with MB 456
Retaining Ring diameter 142,5:136 mm (e.g. Angenieux Zoom - f=17-80/25-250mm)
Retaining Ring diameter 142,5:135 mm. (e.g. for Elite lenses)
Filterholder 4x5 - vertical (wide 150mm)
Filterholder 4x6 - vertical (w. 150mm - shaded)
Filterholder 4x5.650 - vertical (wide 150mm - shaded on both sides)
Filterholder 4x4 (wide 150mm - shaded on both sides)
Filterholder multi-format 4x4 and 4x5.650 filters (with short shaft - f. MB 450)
Filterholder 3x3 (wide 110mm)
Filterholder 4x4 (wide 110mm - with short shaft - f. MB 450 and 440-x)
Filterholder 4x6 (wide 110mm - vertical)
Filterholder 4x4 (wide 110mm)
Filterholder 3x4 (wide 110mm)
Filterholder 4x5 (wide 110mm - vertical)
LMB F4 Filter Frame 4x5.65/4x4in. For use with LMB 4x5, LMB-25 and MMB-2.
Adapter Ring R2-R3 - with screws - fits into size R2 mount and allows use of size R3 rings.
R7 Clamp-On Ring 130-86 mm
R2 Reflex Prevention Ring diameter 128mm wide-angle - For use with Fujinon HAe3x5.
MB-600 Filter frame 4" x 5,65" / 4" x 4"
Height adjustable Barsadapter for MB455
MB-600 Filter frame 6,6" x 6,6"
MB-600 Filter frame 5,65" x 5,65" / 4"x 5,65"
Flag Kit for MB-480 from Vocas includes the left and right side flags and the medium wide top flag.
The Vocas 15mm Studio Adapter is used to mount one MK II Swing Away Bracket onto 15mm support rails.
100mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
104mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
134mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
136mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
80mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
87mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
95mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
85 mm Lens Attachments for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
114mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
125mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
The ring is compatible with Fujinon MK18-55mm T2.9, Fujinon MK50-135mm T2.9 and Celere HS Lenses
MMB-2 Reduction/Clamp-On Ring 80 mm
MMB-2 Reduction/Clamp-On Ring 87 mm
MMB-2 Reduction/Clamp-On Ring 95 mm (UP)
MMB-2 Reduction/Clamp-On Ring 104 mm (UP LDS)
MMB-2 Reduction/Clamp-On Ring 110 mm (Cooke S4)
The Flexible Adapter Ring for MB-430 from Vocas features a soft fabric cuff, which can be stretched around any lens with a diameter of 134mm or less.
UMB-1 Universal Mattebox (Bottom Flag)
Usually ships within 8 to 12 weeks
FlexiBellows Ring 142.5 - Retaining Ring diameter 142,5 mm - flexible rubber bellows with approx. 35 mm extension for lens diameter between 70 to approx. 110 mm (MB415 - 805 - 840 - 602)
FlexiBellows, Retaining Ring diameter 150 mm, flexible rubber bellows with approx. 35 mm extension for lens diameter between 70 to approx. 110 mm (MB 565)
FlexiBellows Ring 130 - for clamp adapter diameter 130mm with flexible - extra long rubber bellows with approx. 35 mm extension for lens diameter betw. 70 to approx. 110 mm (MB 456 - 450W)
Aluminum filter holder 4,5x4,5
Aluminium filter holder 4X5,65 fixed. Filter frame for the horizontal filterslot of the MB-350.
Filter frame 150 mm wide combo 4x4 / 4x5,65 horizontal. 1pc. Included in MB-450.
Filter frame 150 mm wide combo 5,65x5,65 / 4x5,65 Vertical. 1pc.Included in MB-450.
Filter frame 150 mm wide 4x4 for MB-4XX.
Filter frame 121 mm wide for 4x5,65 filters, this frame fits in the fixed horizontal filter slot in the MB-450 Item #0410-0001.
Filter frame 150 mm 4 inchesx4 inches / 4 inchesx5.65 inches combo for MB-430.
Filter frame 150mm 5.65x5.65 and 4x5.65 vertical 2 for MB-430.
Camera adapter plate
Aluminum filter holder 4x6
R11 Clamp-OnRing 143 mm to 134mm for Arri/Fujinon Alura Zooms
R11 Clamp-OnRing 143 mm to 136mm for Angenieux Optimo 17-80 +HR
The MMB-1 can be rendered compatible with the MMB-2 rangeof Stills lens Clamp-onrings - Cine lens Clamp-on rings and Flexible Light Protection system. This adapter ring is a one step reduction from the MMB-1 native143 mm diameter and can be used directly on lenses with a 114 mm front diameter - such as the Alura lightweight zooms range and Master Primes...
R7 Clamp-On Ring 130-95 mm wide-angle - Fits Fujinon 4.5 mm and Canon 4.7 mm wide-angle video zooms - allowing for use of three rectangular filters 4x5.65 or larger.
110mm Lens Attachements for MB-T12 Clamp-On Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
R7 Clamp-On Ring 130-128 mm not for use with Fujinon HAe3x5
Flag Set for MB-T04
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Accessory bar with adjustable slider for MB 565 (e.g. for distance measuring)
Clamp On Matte Box Flexible Adapter Ring Kit
R7 Clamp-On Ring 130-105 mm
R7 Clamp-On Ring 130-121 mm
6×6 Matte Box Filter Tray For MB-T06
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Set of rosettes (Hirth) for handles on MB 565
Top flag for MB-450. Item #0430-0002. This item is included in the MB-450 mattebox set (Item #0400-0451.)
UMB-1 Universal Mattebox (Top Flag Only)
Usually ships within 8 to 12 weeks
Separate Pro support Base plate
Filter Frame Kit (4 x 5.65")
Usually ships within 4 to 5 weeks
R7 Clamp-On Ring 130-95 mm - For UP 16 mm-135 mm - 16 mm zooms and medium-focal-length video zooms. Not for use with wide-angle video zooms.
R7 Clamp-On Ring 130-110 mm
R7 Clamp-On Ring 130-80 mm - For use with Video Lenses
R7 Clamp-On Ring 130-80 mm HS - For use with ZEISS Standard primes and HS primes.
R7 Clamp-On Ring 130-87 mm
R7 Clamp-On Ring 130-90 mm
R7 Clamp-On Ring 130-100 mm - Sony EX3
R7 Clamp-On Ring 130-104 mm
R7 Clamp-On Ring 130-120 mm
R7 Clamp-On Ring 130-117 mm
R7 Clamp-On Ring 130-114 mm
15mm studio adapter for MB-430 Swing away bracket.
19mm adapter for MB-430 swing away bracket.
4×5.65 Filter Tray for MB-T04
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
UMB-1 Universal Mattebox (LW 15mm Rod Clamp Only)
Usually ships within 8 to 12 weeks
UMB-1 Left Side NATO Rail
Usually ships within 8 to 12 weeks
UMB-1 Top NATO Rail
Usually ships within 8 to 12 weeks
Hinged top flag MB-3XX (48cm wide) MKII
French flag for MB-210, including hinge. In some extreme situations this flag is necessary to prevent lens flare. This flag can be mounted on the top or bottom of the MB-210.
Offset Handgrip Extender Long (150mm).
Seperate Blackmagic Cinema camera baseplate
Top Flag for MMB-1/MMB-2
4×5.65 Filter Tray for MB-T12
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Pivot Mechanism for Side Wings (set-2 sides) length 93mm
Intermediate ring diameter 130:104mm for use with step-down rings 411-... 104:xx mm
Retaining Ring diameter 142,5:114 mm - for C.P.II - Sony primes - Zeiss LWZ-1 - Alura LWZ 15.5-45/30-90
Intermediate ring Delrin diameter 130:110 (thread) for use of insertrings 110:xx mm (f. MB456 + 450W)
Intermediate Ring 130:132 mm for Canon HJ 40x
Pivot Mechanism (left + right) for SideWings length 116mm with screws & spring washers
Pivot Mechanism (left a. right) for Side Wings length 104mm with screws and spring washers
Retaining Ring diameter 142,5:121 mm
Top French Flag MB 565, foldable
MMB-2 Connection Ring flexible 67
Tiltaing Mini Clamp-on Matte Box
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
15 mm universal lens support.
Vocas Systems 15mm LW Rods Adapter attaches directly to the MB-430 Matte Box and allows the matte box to be supported by any standard 15mm light-weight-spaced rods.
Shoulder pad standard
Equiped with RED style rosette on once side and a double sided ARRI rosette on the other side.
UMB-1 Universal Mattebox (Filter Tray)
Usually ships within 8 to 12 weeks
Reflex Prevention Ring diameter117mm, 67 gr, 145x145x20 mm
114mm Flexible Donut ring. Max lens diameter 107mm.
Step-down Ring diameter 150:104mm for MB 565
Step-down Ring diameter 150:110mm for MB 565
Step-down Ring diameter 150:114mm for MB 565
Step-down Ring diameter 150:136mm for MB 565
Step-down Ring diameter 150:134mm f. MB 565
Step-down Ring ?150:130mm MB 565
114 mm to M95 Threaded step down ring
114 mm to M77 Threaded step down ring
114 mm to M82 Threaded step down ring
1pc. Carbon 19mm Bar, Length: 8600
114 mm to M72 Threaded step down ring
Base plate adapter for Panasonic Varicam for F55 shoulder base plate
Base plate adapter for Sony PMW-F3. Allows the use of the Vocas Base plate for Sony F5/55 (#0350-1000) on the Sony PMW-F3 camera.
Double sided Handgrip Extender Medium (110mm).
Shim ring set for MFT to PL adapter.
SmallRig Screw-In Reduction Ring Kit with Filter Thread (67mm/72mm/77mm/82mm/86mm) for Matte Box 2660 3410 includes five adapter rings and a storage drawstring bag.
Usually ships within 4 to 5 weeks
Still Lens Clamp-On Ring 58
MMB-2 Connection Ring flexible 58
Still Lens Clamp-On Ring 52
Still Lens Clamp-On Ring 62
Still Lens Clamp-On Ring 67
MMB-2 Still Lens Clamp-On Ring 72
MMB-2 Still Lens Clamp-On Ring 77
MMB-2 Still Lens Clamp-On Ring 82
MMB-2 Connection Ring flexible 52
MMB-2 Connection Ring flexible 62
MMB-2 Connection Ring flexible 72
MMB-2 Connection Ring flexible 77
MMB-2 Connection Ring flexible 82
This 138mm to 114mm Adapter Ring for MB-430 from Vocas has an inside diameter of 114mm and an outside diameter of 138mm. The ring fits into the rear clamp of the MB-430 matte box, allowing users to mount the matte box onto lenses with an outside diameter of 114mm.
This 138mm to 136mm Adapter Ring for MB-430 from Vocas has an inside diameter of 136mm and an outside diameter of 138mm. The ring fits into the rear clamp of the MB-430 matte box, allowing users to mount the matte box onto lenses with an outside diameter of 136mm.
Carbon Fiber Top Flag for MB-T12
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
R4 Screw-In Reduction Ring 114 mm-85 mm - forJVC GY-HD series
Wooden Camera - UMB-1 Universal Mattebox (Universal Donut)
Usually ships within 8 to 12 weeks
Step-down Ring diameter 130:105mm
Step-down Ring diameter 130:117,4 mm for RED lens 300mm
Step-down Ring diameter 130:95mm
Step-down Ring diameter 130:98mm
Step-down Ring diameter 130:128mm
Step-down Ring diameter 130:110mm
Intermediate Ring 130:110mm for use of Step-down rings 110:xx mm (not for use with Swing-Away SunShade 840-13!!)
Step-down Ring diameter 130:114mm
Retaining Ring diameter 142,5:130 mm
Flexi-Insertring for clamp-on-mount diameter 130mm for lens diameter 95 to 125mm. Accessory for MB 456 Academy on rods.
Step-down Ring diameter 130:125mm
Step-down Ring diameter 130:121 mm (Canon HJ18ex28B)
Step-down Ring diameter 130:104 mm (for Cine Xenar III)
Step-down Ring diameter 130:120mm
Pivot mechanism for MB 450 french flag - incl. rod (l. 153mm) - shims - screws - lever
Pivot mechanism for french flag at MB456 - incl. rod (l. 163mm) - shims - screws - lever
Step-down Ring diameter 130:100 mm (for Xenon FF)
Tray Catcher, security lock for filterholder on MB 565
Step-down Ring diameter 130:117mm
Pivot Mechanism for French Flag - cpl. incl. rod (length 162mm) - screws and shims - lever - brackets
Step-down Ring diameter 110:85 mm
Top French Flag extra wide angle - foldable
Pivot Mechanism for French Flag cpl. incl. rod (length 197mm) - screws and shims - lever - clamp screws + brackets
Pivot Mechanism for French Flag at CBH-S16 cpl. incl. rod (length 199,5mm) - screws and shims - lever - clamp screws + brackets (matching also to 805-01 - 415-01F - 412-01F - CWAH-FV - CWAH-S16 - CLWAH-169)
Pivot Mechanism for French Flag cpl. incl. rod (l. 203mm) - screws and shims - lever - clamp screws + brackets (fits 415-02F - 412-02F)
Top French Flag S16 - foldable
Step-down Ring diameter 110:80 mm
Retaining Ring diameter 142,5:120 mm
Retaining Ring diameter 142,5:132 mm
Retaining Ring diameter 142,5:117 mm and 117,4 mm for RED 300mm
Retaining Ring diameter 142,5:128 mm
Retaining Ring diameter 142,5:134 mm e.g. AluraZoom
Step-down Ring diameter 104:95 for Fujinon/Canon/Angenieux wideangle zoomlenses 4.5/4.8 (f. SD 412-02F)
For 3/8 accessories such as ultrasonic devices - compatible with LMB-25/LMB-6
105mm to M37 Adapter Ring
Step-down Adaptor Ring (105mm - M72)
15mm Bracket for Monitor support. (only the bracket NO! magic arm!)
1pc. Carbon 19mm Bar, Length: 500mm
4 x 4? Filter Tray for MB-T03 and MB-T05
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
143mm Flexible Cuff ring. Max lens diameter 137mm
Double sided Handgrip Extender Short (66mm). Equipped with Arri style rosettes.
Add a round filter to your Mirage matte box with the Rotatable Circular Filter Tray from Tilta. Compatible with 95mm round filters, this tray is designed to let you fine-tune the position of a polarizer, streak, or other filter.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Combine multiple 95mm circular filters to achieve a unique aesthetic with a set of the Tilta Stackable Circle Filter Tray for Mirage Matte Box, meant to attach to your Mirage Matte Box. It replaces the standard rubber hood of the matte box, though it also allows the hood to be secured to the front of the tray.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-134mm)
Usually ships within 8 to 12 weeks
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-104mm)
Usually ships within 8 to 12 weeks
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-110mm)
Usually ships within 8 to 12 weeks
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-114mm)
Usually ships within 8 to 12 weeks
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-87mm)
Usually ships within 8 to 12 weeks
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-95mm)
Usually ships within 8 to 12 weeks
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-125mm)
Usually ships within 8 to 12 weeks
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-80mm)
Usually ships within 8 to 12 weeks
R2 Reflex Prevention Ring diameter 134mm
For use with MMB-1 side load. Open corners allow for rotation under microphone of Sony PMW-EX1
R2 Reflex Prevention Ring diameter 121mm
R2 Reflex Prevention Ring diameter 128mm - Not for use with Fujinon HAe3x5.
R2 Reflex Prevention Ring diameter 130mm
R2 Reflex Prevention Ring diameter 136mm
105 mm to 86 mm Step down ring for MB-3XX
114 to 104mm step down ring
The Vocas 0320-0003 Adaptor Ring is a 105 to 95 mm step-down adaptor ring used to attach the broadcast MB-3XX series mattebox, when the mattebox is used as a clip-on (directly attached to the lens front).
Vocas 105 mm to 95 mm Step down ring for MB-3XX for Canon wide angle lenses
Vocas 105 mm to 95 mm Step down ring for MB-3XX for Fujinon wide angle lenses
Vocas 105 mm to 85 mm Step down ring for MB-3XX
114 mm to 88 mm Step down ring for MB-215 / MB-255 / MB-216 and MB-256
Step Down Adaptor Ring (105-100mm)
Step-down Adaptor Ring (105-90mm)
Step-down Adaptor Ring (105-80mm)
114 mm to 100 mm Step down ring for MB-215 / MB-255 / MB-216 and MB-256
114 to 87mm step down ring
114 to 95mm step down ring
114 to 85mm step down ring
114 to 95mm WA step down ring for MB-430
114 to 98.5mm step down ring
114mm to 110mm Adapter Ring for MB-255 from Vocas features an inside diameter of 110mm and an outside diameter of 114mm.
This 114mm to 105mm Adapter Ring for MB-255 from Vocas.
114 to 98mm step down ring
143 to 138 mm to fit 138 mm stepdown series
143 to 114 mm used to fit 114 lenses or the 114 mm stepdown series
R4 Screw-In Reduction Ring 114 mm-93 mm - for SonyHVR-Z5
Carbon filter holder 3x3
Adapter Ring diameter 110:M 77 mm screw-in - for DV/HDV Camcorder.
Step-down Ring diameter 110:95 mm to use with only 1 filterholder up to focal length 4.5mm
Step-down Ring diameter 110:100 mm
Step-down Ring diameter 110:90 mm
Adapter Ring diameter 110:M 72 mm (screw-in DV/HDV Canon - Panasonic + Sony)
Step-down Ring diameter 110:105 mm
Step-down ring diameter 110:98,5 mm
Step-down Ring diameter 110:98 mm
Step-down Ring diameter 110:104 mm - for combination with srew-in-rings of type 104 to Mxx.
Step-down Ring diameter 110:98 mm with recess for wide angle converters. typical: 0.75 times by 16x9 Inc.
Adapter Ring diameter 110:M 82 mm (screw-in DV/HDV Canon + Panasonic)
Step-down Ring diameter 110:96 mm
Step-down Ring diameter 110:95mm for ENG wide angle lenses e.g. Canon F4.3mm (f. SD 412-02F110)
Step-down Ring diameter 110:95 mm
Step-down Ring diameter 110:86 mm
Filterholder 4 1/2 inches round 2 parts (410-09-01+410-09-02) - for using 4 1/2 inches round filters in the 138mm compartment of the rubber bellows (410-13).
Top French flag for MB 4:3 and 16:9 - foldable