No products
Check out
All manufacturers ABC AJA Allen Avionics Alphatron Amberfin Angenieux Anton-Bauer Arri Astro Athletic ATOMOS Autocue Beachtek BlackMagic Design Bluebell Opticom Blueshape Boxx Broadcast Pix C-Motion CamRade Canon Canopus Century-Optics Chrosziel Cinedeck Cineroid Comer Convergent Design Datavideo Decimator Dedolight Digidolly Don Earl Doremi DSM DvTec Easyrig Formatt Fostex Fotonexport Fujinon G-Technolgy Genus Harris Honda Hoodman Humble Monkey Productions Ianiro Image Engineering Induro Jvc K-Tek K5600 Kata KesslerCrane Kinoflo Koenig/Meyer KRK systems LAIGLE Litepanels LiveU MacBeth Mackie Manfrotto Marshall Matrox Matthews Miller Miranda Motu MovieTech MTF Muraro NewTek Optex Orad Osram PAG Panasonic Pelicase Philips Photoflex Playbox Poigneebleu PortaBrace PrompterPeople PSTechnik Putora RED Reflecmedia Rode Rorke Data Rycote Sachtler Safaritripod Samcam.tv Sandisk Sanken Sekonic Sennheiser Snell Sony SoundDevices SQN Swedish Chameleon Swit TECPRO Tiffen Triad TVOne Ultimatte Varizoom Vinten Visuals Vocas Voice-Technologies Vokkero Vsn Yamaha Zacuto Zeiss Zunow Zylight
All new products
Subscribe Unsubscribe
Discover our offices
The Dedolight clamp attaches securely to stands, pipes, shelves, etc. up to 4.8 cm (1 ñ 7/8 inch) diameter. It is fitted with a 16 mm (5/8 inch) stud that pivots and locks in two positions. Weight: 147 g (5.2 oz.)
Select to compare
For mounting DEB400D electronic ballast to lighting stand. Weight: 138 g (4.9 oz.)
Made of special elastic aircraft aluminium, the Dedolight holder not only tapes to flat surfaces but cut -outs in the plate allow it to be attached to table legs and small or large pipes. Weight: 142 g (5 oz.)
This holder accepts the 30 cm (12) Dedoflex diffusers and reflectors and is mounted between the stand and the light head. Weight: 180 g (6.3 oz)
Allows mounting of DT12-4, and DT24-3 power supply/control unit to light stands with 16 mm (5/8 inch) studs. Weight: 343 g (12.1 oz.)
Image 45 Barndoors (Set of 4).
Image 85 Barndoors (Set of 4).
Kamio Ballast Mount (16mm) MTP-141.
Kamio Ballast Clamp w/Baby Pin (16mm)
Kamio Ballast Baby Pin Shoe Mount (16mm).
Ballast Baby Mount (16mm).
Blanket-Lite Frame Ear.
Blanket-Lite Frame Clip, Long.
Blanket-Lite Frame Corner Assembly.
Mount Plate w/ Baby Receiver (16mm).
Mount Plate w/ Baby Receiver Short (16mm).
Twist-On Mount Plate w/ Junior Pin (28mm).
Mount Plate w/ 3/8î Pin (10mm).
Slide-On Mount Plate w/ Junior Pin (28mm).
Mini-Flo Flex Arm Mount.
Fork attachment for styrene gobos: supplied with 1/4" and 3/8" female attachment.
Magic arm with quick release plate
Clamp specifically designed for the Fig Rig.
Special adapter 3/8 to 1/4 thread.
A clamp that works on diameters from 28mm to 78mm.
A combination of two sets of gripheads discs mounted on a steel plate with a 10mm rod. Attachment: 10mm x 135mm rod.
Avenger D520B - Extension Grip Arm 40".
Lighting Stud MR plugs into Super Clamp 035.
D200 2 1/2" GRIP HEAD.