An adapter with an Arri viewfinder dovetail on one side and one 3/8 and one 1/4 mounting point on the other side. This adapter can be used to mount the AMIRA or ALEXA viewfinders to Arri Universal Mounting Arms (UMA) or Noga arms.
An attachment that allows the AMIRA viewfinder to be mounted to two 15 mm lightweight rods above the lens - as can be found on the Universal Adapter Plate UAP-2 (K2.0001221). This bracket is already included in the Universal Adapter Plate UAP-2 Set (K0.0001280).
A heated eyecup compatible with the AMIRA MVF-1 (new eyepice) and the ALEXA EVF-1 eyepiece. Designed to reduce fogging or freezing in very humid and/or cold environments. Not compatible with AMIRA MVF-1 (old eyepiece) or film camera eyepieces. Includes heated eyecup cable KC-42 (K2.47771.0).
A robust heated eyecup with 2 power settings and an automatically closing element that fits all ArriCAM - ArriFLEX and ALEXA Studio eyepieces. Not compatible with ALEXA Electronic Viewfinder EVF-1 or AMIRA Viewfinder MVF-1 eyepieces. Cable has to be ordered se PARately.
A robust heated eyecup with 2 power settings that fits all ArriCAM - ArriFLEX and ALEXA Studio eyepieces. Not compatible with ALEXA Electronic Viewfinder EVF-1 or AMIRA Viewfinder MVF-1 eyepieces. Cable has to be orderedse PARately.
150 mm viewfinder extension compatible with OVF-1 (with ArriCAM Eyepiece Adapter AEA-1) - ArriCAM Studio Viewfinder - ArriCAM Studio Universal Viewfinder - ArriCAM Lite Viewfinder 2 and ArriCAM Lite Universal Viewfinder.
With this adapter the ALEXA Studio Optical Viewfinder OVF-1 can accept the ArriCAM Studio Eyepiece (K2.54003.0) - ArriCAM Studio Medium Extension (K2.54005.0) - ArriCAM Studio Zoom Extension (K2.54004.0) and ArriCAM Studio Anamorphic Extension (K2.54018.0 - which is recommended - sadly but...
A mechanical cover for the ALEXA Studio or ALEXA XT Studio viewfinder interface that includes mounting points for the ALEXA Viewfinder Mounting Bracket VMB-1 - VMB-2 or VMB-3 and an EVF connector for an ALEXA viewfinder cable.
Sturdy telescoping bracket that positions the Electronic Viewfinder EVF-1 or MVF-1 at the back of the camera (i.e. for use with geared heads). Includes swing-out arm to rest viewfinder on camera during set up changes. Requires medium (recommended) or long viewfinder cable.
Sturdy telescoping bracket that attaches the Electronic Viewfinder EVF-1 to all ALEXA cameras (Electronic Viewfinder Adapter EVA-1 additionally required for ALEXA Studio and ALEXA XT Studio). Uses standard 15 mm lightweight rods (at the proper distance from each other and from the optical center)...
A cover to protect the ALEXA Studio or ALEXA XT Studio viewfinder port when neither the Optical Universal Viewfinder OVF-1 (K2.72048.0) nor the Electronic Viewfinder Adapter EVA-1 (K2.72063.0) are attached.