The Speed Rail Mounting Clamp Set from Tilta features four adjustable clamps designed to accommodate multiple configurations when using the 50mm speed rails of the Speed Rail Car Mounting Kit. This sturdy aluminum and stainless steel quick-assembly set simplifies the mounting process and can also be used to build larger rigs when used with optional Speed...
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Monitor Bracket extension retrofit kit, 8in
Reinforced dovetail plate for SRH-3, SRH-360, TRINITY, MAXIMA Length 450mm / 17.7in. Weight: 457gr / 16oz
The STEADICAM Camera Dovetail Plate Assembly for Medium Stage from Tiffen includes a rack for fore-aft adjustment.
The Stabilizer Plate for CBP 450mm/18in is a long support plate designed to support ALEXA Mini/Mini LF and longer cinema optics, such as Signature Zooms, on ARRI CSS products.
Heavy Duty Stand for Steadicam with 16mm spigot.
Monitor Bracket extension retrofit kit, 6in
Designed by Mike Johnson in the US, the Top Point Kit adds stability to all stabilizer rigs requiring good resistance to vibrations and flex. The kit is not limited to ARRI CSS but fits particularly well the remote head SRH-360.
The Stabilizer Adapter Mount SAM-6 450 mm/18 in. is a long, low-profile sliding dove tail plate that connects the ALEXA 35 to ARRI CSS products such as SRH-3/360 and supports long camera builds.
Super Post main cable for ARTEMIS 2 and TRINITY 2. High capacity 12V/24V, 2 x 12G Video, LBUS, Can Bus, Tally. Lemo 3B 16pin to Lemo 3B 16pin. ARTEMIS 2 and TRINITY 2 only!
Armorman 3.0 Overhead Configuration Attachment
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Super Post main cable for artemis and TRINITY Gen1. High capacity 12V/24V, 2x 4G Video, Tally. Lemo 3B 10pin to Lemo 3B 10pin. For artemis Cine and TRINITY Gen.1 only!
Flexible standard main cable to connect the outer ring of the TRINITY 2 to the inner ring. High capacity 12V/24V, Data, 1 x 12G Video, LBUS, Can Bus, Tally, 0,56m/22in. TRINITY 2 only
adicam Hard Mount for Stabilizer Arm
To connect the SRH-3 Remote Control Panel to the SRH Remote Head or to the External Radio Modules K2.0033757 ERM-2400 (2.4GHz) and K2.0033758 ERM-900 (900 MHz). FS CAN Bus & 12V, Length: 25m/82ft, For SRH-3, SRH-360, ERM SRH, ERM LCS
Longer SRH Mitchell Mount Collar for the SRH stabilized remote head. Very useful for special cranes. Length: 45mm / 1.77in. Note: Metric thread. For SRH-3 and SRH-360
Spare SRH Mitchell Mount Collar for the SRH stabilized remote head. Length: 40mm / 1.57in Note: Metric thread, For SRH-3 and SRH-360
Handheld stabilizer is designed for any camera weighing up to 3kg. The gimbal is made of Titanium and Tungsten Carbide, the body is in Carbon Fiber and black and blue Soft-touch Aluminum. The TITAN weights a little less than 0.45 Kg!
Spare ERM Power Cable for ERM-2400 & ERM-900, Length: 30 cm/11.8 in
Basic Ring Grip Plus for DJI Ronin Control Travel Kit
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Clamp bracket to lock the pan axis of the MAXIMA. For MAXIMA only
The set contains a 4-pin XLR power cable and a Gold Mount battery holder that can be mounted on the rods of the DRW-1 base plate. K2.0024168 1x SRH Battery Mount for Remote Control Panel, Gold-Mount, K2.0021422 1x 12V Battery Power Cable, D-Tab, 4pin XLR, 1,5m/5ft. For SRH-3 and SRH-360
The set contains a 4-pin XLR power cable and a V-Mount battery holder that can be mounted on the rods of the DRW-1 base plate. K2.0024167 1x SRH Battery Mount for Remote Control Panel, V-Mount, K2.0021422 1x 12V Battery Power Cable, D-Tab, 4pin XLR, 1,5m/5ft. For SRH-3 and SRH-360
The Stabilizer System Bracket SSB-2 15mm studio is a adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e.g. LS-9, LS-10 as well as matte boxes, rain deflectors, ring lights and other accessories that require centering on studio rod supports.
The Stabilizer System Bracket SSB-2 19mm studio is a adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e.g. LS-9, LS-10 as well as matte boxes, rain deflectors, ring lights and other accessories that require centering on studio rod supports.
The side-to-side fine adjustment upgrade for TRINITY Gen. 1 can only be performed in conjunction with the DUB-3 (K2.0040347).
Power cable to power the SRH-3 and SRH-360 stabilized remote head with 12V and 24V power from high capacity battery providing 12V and 24V power 12V 4pin XLR and 24V 3pin XLR , 0,5m/1.64ft For SRH-3 and SRH-360
Small sides feet, which can be attached laterally to the rosettes of the SRH remote control panel. For SRH-3 and SRH-360
The Steadicam Steadimate-S Gimbal Collar & Base is a mechanical gimbal collar/yoke and a base for integrating compatible handheld motorized gimbal stabilizers into a body-worn system.
As the foundation for custom-build speed rail rigs, this Tilta Speed Rail Set features six pieces of 50mm speed rail in two different sizes designed to support multiple configurations for various shock-absorbing arms.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
TRINITY Joystick Main Cable including the BNC-SMB Cable. 8 pin Lemo 1B to 7 pin Lemo 0B
The newly developed 19 mm hinge allows even more precise positioning of the batteries thanks to the finer ARRI rosette. And as soon as the hinge is locked, the batteries are held securely and without any play or vibrations. It is also possible to use two hinges on the ARTEMIS 2 and TRINTY 2. This allows the batteries to be positioned even more freely and...
Aero Docking Bracket, 1/2" Deluxe (Spare)
Shock absorber complete 900N
Shock absorber complete 1000N
Shock absorber complete 1200N
Shock Absorbing Head for Hydra Arm Mini
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Mini joystick control which can be mounted at the frame of the MAXIMA right above the rubber handle. For Tilt and Pan. Note: Roll have to be done with the wireless remote control K2.0010337. For MAXIMA
Analog joystick cable to connect the analog TRINITY Gen.1 Joystick with TRINITY 2. Lemo 1B 8pin to Lemo 0B 7pin, no video. TRINITY 2 only
Support bar upper std. (complete down to the straight support bar)
Support bar upper Std. (complete down to the Power pack)
Longer and more flexible main cable to connect the outer ring of the TRINITY 2 to the inner ring. Data, 1 x 12G Video, LBUS, Can Bus, 0,65m/26in. TRINITY 2 only
To connect the SRH-3 Remote Control Panel to the SRH Remote Head or to the External Radio Modules K2.0033757 ERM-2400 (2.4GHz) and K2.0033758 ERM-900 (900 MHz). FS CAN Bus & 12V, Length: 10m/32.8ft, For SRH-3, SRH-360, ERM SRH, ERM LCS
This is a V-Mount Battery Plate from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 stabilizer and support V-Mount batteries to power the stabilizer.
This is a Gold-Mount Battery Plate from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 stabilizer and support Gold-Mount batteries to power the stabilizer.
This is a Sony BP-U Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Sony BP-U batteries to power the stabilizer.
This is a Canon LP-E6 Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Canon LP-E6 batteries to power the stabilizer.
This is a Sony NP-F970 Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Sony NP-F970 batteries to power the stabilizer.
This is a Panasonic D28 Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Panasonic D28 batteries to power the stabilizer.
The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8in and the 1.5in center post.The Delrin adapters make it possible to mount the counterweight on both the outer 1.8in post and the 1.5in telescoping inner post. The Counterweight is made of stainless steel.
The Basic Ring Grip Plus for DJI Ronin from TILTA is specifically designed to work with the DJI RS2, RS3, and RS3 Pro, providing a comfortable and dynamic two-handed support system. The compact and cable-free design is made of a magnesium and aluminum alloy, making it slightly lighter than its predecessor model but with improved durability.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Extension cable to connect the SRH remote control panel and the SRH remote head.
Universal wrench for the SRH Castle Nut / Mitchell Mount
Upgrade the first Gen. of the STABIL am to G2, contains: 2 side plates upper
The Stabilizer Adapter Mount SAM-8 is a low-profile sliding dove tail plate that connects the ALEXA 35 to Tiffen Steadicam products, such as M1 and M2.
Main cable for ARTEMIS 2 and TRINITY 2. High capacity 12V/24V, Data, 2 x 12G Video, LBUS, Can Bus, Tally. Lemo 3B 16pin to Lemo 3B 16pin. ARTEMIS 2 and TRINITY 2 only!
The Steadicam AERO Sled Bag is a zippered case that fits the sled of the Steadicam AERO 15 or AERO 30 system.
Reinforced dovetail plate for SRH-3, SRH-360, TRINITY, MAXIMA. Length: 31,5cm, 12,4in, Weight: 250gr / 6.7oz
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the...
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the...
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the...
Complete pivotal middle tube unit out of steel, length 300mm/11.8in
900N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M8
600N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
750N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
200N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
500N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
1000N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M8
400N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
1200N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M8
300N Shock absorber complete for 800-1000mm/31.5-39.37in lower bars, line length 1500mm/59in, M6
Redesigned and improved post clamp that clamps onto the 1.5" inner post and directly onto the 1.8" outer post with an insert. The use of now two bolts holding the Rossette block ensures maximum rigidity. NOTE: Sachtler rosette
Redesigned and improved post clamp that clamps onto the 1.5" inner post and directly onto the 1.8" outer post with an insert. The use of now two bolts holding the Rossette block ensures maximum rigidity. NOTE: ARRI Rossette
Newly developed Rain Cover for SRH-3 and SRH-360. Due to the flexible materials, the rain cover adapts perfectly to the shape of the remote head. The padded outside of the Rain Cover offers extra protection. NOTE: The set includes two different pan axis covers for the SRH-3 and SRH-360.
To connect the SRH-3 Remote Control Panel to the SRH Remote Head or to the External Radio Modules K2.0033757 ERM-2400 (2.4GHz) and K2.0033758 ERM-900 (900 MHz). FS CAN Bus & 12V, Length: 1m / 3.2ft, For SRH-3, SRH-360, ERM SRH, ERM LCS
To speed up the assembly of the stabilized remote head to the BLACK ARM by Flowcine, a second SRH Castle Nut should already be permanently placed in the mount of the BLACK ARM. To do so, a second SRH Castle Nut is needed. Having a spare castle nut is always advisable, in case the original SRH-3 castle nut goes missing. Note: Imperial thread. For SRH-3 and...
Steadicam High/low Mode Bracket Set
Shock absorber complete 600N
Shock absorber complete 200N
Shock absorber complete 300N
Shock absorber complete 400N
Shock absorber complete 500N
Shock absorber complete 750N
Basic Ring Grip Plus for DJI Ronin Travel Kit
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Reinforced dovetail plate for SRH-3, SRH-360, TRINITY, MAXIMA. Length: 200mm, 7,87in, Weight: 190gr / 6.70oz
To speed up the assembly of the SRH stabilized remote head to the BLACK ARM by Flowcine, a second SRH Castle Nut should already be permanently placed in the mount of the BLACK ARM.
The Compact Lens Support CLS-1 fits directly to the front groove of the Stabilizer Plate for CBP 450mm/18in and 355mm/14in to supports heavier prime lenses and smaller zooms such as the Signature Zoom 16-32mm. With lenses with support height reach under the level of the stabilizer mount, The Stabilizer Systems Bracket SSB-2 19mm or 15mm is advised.
Bellow block complete unit
Additional cheese plate which can be mounted to the right side at the top of the MAXIMA. The mounting plate many offers 3/8'' threads. Length: 12,7 cm Width: 9,2 cm / Length: 5'' Width: 3.62''. For MAXIMA only
Stabilizer System Bracket 6 (Basic Set)
Coupler to extend SRH FS CAN Bus Cables like: K2.0033762 SRH FS CAN Bus Cable, 1m/3.2ft, K2.0019302 SRH FS CAN Bus Cable, 10m/32.8ft, K2.0019301 SRH FS CAN Bus Cable, 25m/82 ft, FS CAN Bus & 12V, Length: 0.2m/0.65ft, For SRH-3 and SRH-360
Includes arm posts diameter 15.8 mm (5/8'') - length 76 mm (3'') and 300 mm (12''). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
The C+SADDLE is the next generation camera support bag. Over the years, the saddlebag has become an essential item supporting both professional film-makers, as well as television and commercial producers. It can be used to facilitate making those especially difficult low-angle shots or as a safety mount for any type of transportation.
Includes arm posts diameter 15.8 mm (5/8'') - length 76 mm (3'') - 254 mm (10''). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Cheese plate like accessory mounting bracket which allows to add additional accessories, like transmitters to the right side of the SRH stabilized remote head. For SRH-3 and SRH-360
The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI Trinity and MAXIMA system. The SAM-1 is also compatible with third-party stabilizer systems fitted with a standard 60 mm dovetail
Wheel set (with 3 wheels) for HD SteadiStand with lock
Steadicam Docking Bracket With Baby Reciver
Wind Net Mobile Kit 4'(120cm) X'6(180cm)
The set consists of two different counterweights. The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each. The larger counterweight is equivalent to the weight of a cforce mini motor. Thus, the counterwight are perfect for getting difficult camera setups into perfect balance.
The Stabilizer Adapter Mount SAM-6 is a low-profile sliding dove tail plate that connects the ALEXA 35 to ARRI CSS products, such as ARRI TRINITY and SRH-3/360
The Stabilizer Adapter Mount SAM-7 is a low-profile sliding dove tail that connects the ALEXA 35 to ARRI Artemis and GPi PRO Stabilizers.
The Stabilizer Adapter Mount SAM-9 is a low-profile sliding dove tail that connects the ALEXA 35 to DJI Ronin 2.
The Basic Ring Grip Plus for DJI Ronin from TILTA is specifically designed to work with the DJI RS2, RS3, and RS3 Pro, providing a comfortable and dynamic two-handed support system. The compact and cable-free design is made of a magnesium and aluminum alloy, making it slightly lighter than its predecessor model but with improved durability.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Case for Sprinter trackwheelset curve
The Steadicam SteadiSTAND is a turtle base C-stand with a standard light stand post. This is an updated stand that is strong enough to hold the Steadicam Flyer, Flyer LE, or Archer2.
Easyrig STABIL spring assembly
Easyrig STABIL G3 spring assembly
Easyrig STABIL Light spring assembly
24V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306) 24V High Capacity, 3pin XLR, Length: 20m/66ft For SRH-3 and SRH-360
12V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306) 12V High Capacity, 4pin XLR, Length: 20m/66ft For SRH-3 and SRH-360
24 volt power cable with one 3-pin Lemo connector and open end.
12V Camera Power Cable for Clipper 312/324
Additional counterweight for the TRINITY Gen.1. The bracket is mounted at the bottom of the outer ring of the TRINITY Gen.1 and allows 25, 50, 75 grams of extra weight to be attached. This additional counterweight gives the TRINITY Gen. 1 a much better "drop down" behavior when the TRINITY is in the horizontal plane.
RS 2 Remote Control Handle for Advanced Ring Grip
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Wind Net Mobile Kit 3'(90cm)x4'(120cm)
The Lightweight Dual-Handle Gimbal Support System from Tilta combines an ergonomic stabilizer vest with a dual-handle bracket for your DJI Ronin RS 2, RS C 2, RS 3, or RSC 3 Pro gimbal. This kit enables you to comfortably support your gimbal by transferring weight to your core and offering a two-handed grip option.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Quick release plate by adicam allows you to connect your Steadicam dovetail with a regular tripod head.
Quick release plate by adicam allows you to connect your Steadicam dovetail with a regular tripod head.
Power cable for the Transvideo Starlite monitor used with the TRINITY 2 pin Lemo 0B straight plug. TRINITY Backup Cable
Power and data cable to connect the RCP-3 remote control to the TRINITY2 system. Fischer 4pin to Fischer 4pin, 25cm/10in. TRINITY 2, RCP-3
24V high capacity camera power cable. Lemo 2B 7pin to Fischer 2pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
Upper support bar including adjustable block
The Speed Rail Mounting Suction Cup from Tilta is a high-capacity suction cup designed with sturdy aluminum, stainless steel, and rubber to sustain payloads up to 110 lb. It works perfectly with the Tilta Speed Rail Car Mounting Kit but is compatible with any 50mm speed rail.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
The Stabilizer Adapter Mount SAM-5 is a low-profile sliding dove tail plate that connects the ALEXA 35 to a M?VI Pro or M?VI M15.
Adapter cable to connect the ERM LCS to ALEXA Mini, ALEXA Mini LF and Amira via the EXT. socket.
Adapter cable to connect the ERM LCS to the WCU-4, SXU-1 UMC-4 and ALEXA Plus camera via the LCS socket. Recommended and required optional extension cables: SRH FS CAN Bus Cable, 1m/3.2ft K2.0033762, SRH FS CAN Bus Cable, 10m/32.8ft K2.0019302, SRH FS CAN Bus Cable, 25m/82ft K2.0019301
12V HiCap camera power cable / Lemo 1B 4pin -> Lemo 1B 6pin / for Red Epic. 12 Volt / High Capacity
Complete power pack, (Orange and black housing) supports 2-7 kg / 4.4-15.32 lbs
12 V high-capacity power cable to connect the TRINITY Battery Hanger Gen.1 with the ARTEMIS EFP Top Stage. Lemo 1B 4-pin to 2B 6-pin
Adapter cable to connect the ERM LCS to Master Grips, OCU-1, DRW-1 and DEH-1 via the LBUS socket. Recommended and required optional extension cables: SRH FS CAN Bus Cable, 1m/3.2ft K2.0033762, SRH FS CAN Bus Cable, 10m/32.8ft K2.0019302, SRH FS CAN Bus Cable, 25m/82ft K2.0019301, For ERM LCS only.
Extension cable to connect the SRH remote control panel and the SRH remote head. Extension cable to connect the ERM-2400 (2.4GHz) K2.0033757 and ERM-900 (900 MHz) K2.0033758 to the SRH remote control panel and remote head. Extension cable to connect the ERM-LCS to the WCU-4, SXU-1, EXT and LBUS compatible products. Length: 0,3m / 0,98ft. For SRH-3,...
Clamping bridge that can be clamped onto the rods of the battery hanger of TRINITY 2 as well as TRINITY Gen.1 and artemis Gen.1. TRINITY 2, TRINITY Gen.1, artemis Gen.1
The SSB-3 bracket can be used to mount the Volt control box to the top stage of the artemis. Or can be used as a focus bracket which can be mounted at the artemis top stage, or the to SAM plates, or to the CCS dovetail plates.
Armorman 3.0 Nucleus-M Handle Support Cup (Pair)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Armorman 3.0 Support Cup (pair)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Tilta Float System RS 2 Battery Counterweight Bracket
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien Rail Mounting Attachment
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
12V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306), 12V High Capacity, 4pin XLR, Length: 10m/33ft. For SRH-3 and SRH-360
External power cable to use the TRINITY head as a stand-alone Gimbal. Anton Bauer D-Tab -> Lemo 1S 4pin 12 Volt
24V High Capacity extension cable to connect a block battery with the SRH High Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ft (K2.0019306). 24V High Capacity, 3pin XLR, Length: 10m/33ft. For SRH-3 and SRH-360
Power / Data cable for the ARRI Starlight monitor used with the TRINITY. 5 pin Lemo 0B straight plug
Smartphone Pro 2 Axis Push-Button Arm
Support bar lower, length 1000mm/39.37in
12V HiCap 90° angled camera power cable / Lemo 1B 4pin -> Lemo 2B 8pin / for ARRI AMIRA & ALEXA Mini. 12 Volt / High Capacity
2 Axis Push-Button Arm for 25mm Gimbal Rod
2 Axis Push-Button Arm for 30mm Gimbal Rod
Lower support bar 800mm/31.5in
Support bar lower, length 800mm - 31.5 in (Std. For Easyrig 3 GimbalRig)
Armorman 3.0 Universal Gimbal Ring Adapter (Pair)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Add a second handle to your DJI RS 3 Pro or RS 2 gimbal that incorporates power output, gimbal movement, and camera control with this Advanced Rear Operating Control Handle from Tilta. This improved handle mounts onto the electronic NATO mounts on the side of the gimbal handle, and its adjustable arm facilitates two-handed operation for high-angle or...
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Cable to power the system through the Top Stage from the Battery Hanger. TRINITY Power cable / Lemo 1B 4pin -> 1B 4pin
Armorman 3.0 Waist Support
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Easyrig super clamp (comes in pairs)
Cable to power the TRINITY system through the Top Stage from the Battery Hanger. Lemo 1S 3pin to 1S 3pin Note: Only for TRINITY upgraded to 24V.
Cable to power the system through the Top Stage from the Battery Hanger. TRINITY Power cable / Lemo 1S 3pin -> 1B 4pin
Support bar lower, length 600mm - 23.6 in (Std. For Easyrig 3)
Steady and comfortable handheld shooting is easily achieved with the Manfrotto Quick Release Plate Adapter for Float Stabilizing Arm from Tilta. Designed primarily to allow you to mount any camera body onto the Tilta Float, the adapter can also be attached directly to your camera or gimbal and is also compatible with the DJI Ronin 4D, taking full...
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Standardfor Easyrig 2.5 and Easyrig 3 Cinema up to +130/ 5in arms
EasyTilt
The Steadicam AERO Sled Bag is a zippered case that fits the sled of the Steadicam AERO 15 or AERO 30 system.
Hydra Alien Monitor Bracket
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Rear Operating Control Handle for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
12V HiCap camera power cable / Lemo 1B 4pin -> Lemo 2B 8pin / for ARRI AMIRA & ALEXA Mini. 12 Volt / High Capacity
24V Power Distribution Module for DJI Ronin 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Monitor mounting adapter for Transvideo CineHD 6'', CineHD 8'', RainbowHD and the Starlight monitors
12V high capacity camera power cable. Lemo 2B 7pin to Lemo 2B 8pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
12V high capacity camera power cable. Lemo 2B 7pin to Lemo 1B 6pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
24V high capacity camera power cable. Lemo 2B 7pin to Lemo 2B 8pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
ARRI Standard to DJI Ronin 2 Dovetail Adapter (11")
Lower nylon block, with pivot stop
Wireless Thumb Controller for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Connect 50mm speed rail to any vehicle with a tow hook with this Front Tow Hook Adapter for Speed Rail Car Mounting Kit from Tilta.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
12V high capacity camera power cable. Lemo 2B 7pin to XLR 4pin, 90° elbow, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY or the MAXIMA.
C-Stand with Removable Turtle Base. Max. height 155 cm (61´ inch). For all artemis systems and to park the MAXIMA with mounted Spider K2.0010425
Complete EASYLOCK, ONLY FOR GIMBAL VESTS (requires special sewing machine)
Power cable to power the Volt Control Box from the artemis top stage. Lemo 0B 3pin - Fischer 3pin Length: 0.3m/0.9ft
24V high capacity camera power cable. Lemo 2B 7pin to XLR 4pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
High capacity 12V / 24V power cable to connect the Battery Hanger Module with the Top Stage or Bottom Stage Gen. 2. Lemo 2B 7pin to Lemo 2B 7pin. ARTEMIS 2, TRINITY 2 only!
Lower / Upper tube out of steel, length 100mm / 3.93"
Lower nylon block
1200N gas shock absorber, Strong (NOTE! Can't be mounted on a standard Vario 5)
850N gas shock absorber, Standard
Power cable to power the Volt Control Box from the artemis top stage. Lemo 0B 3pin - Lemo 0S 4pin Length: 0.3m/0.9ft
Power cable to power the Volt Control Box from the artemis top stage. Lemo 0B 3pin - Lemo 0B 2pin Length: 0.3m/0.9ft
Power cable D-Tap to 2pin Lemo 0B. Length: 1m/3.2f, For ERM SRH, ERM LCS
24V high capacity camera power cable. Lemo 2B 7pin to Lemo 2B 4pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
Add a second handle to your DJI RS 3 Pro or 2 gimbal that incorporates power output, gimbal movement, and camera control with this Rear Operating Control Handle from Tilta. The handle screws onto the electronic contacts on the side of the gimbal handle, and its adjustable arm facilitates two-handed operation for high- or low-angle shots.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Comfortably support your gimbal by transferring weight to your core using the Lightweight Gimbal Support Vest from Tilta. This ergonomic, slim-fit vest supports up to 22 lb, works with most single and dual-handle gimbals, offers multiple 1/4"-20 threads and shoe mounts, and provides tripod grip and DJI RS 2 and RS 3 battery grip support.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Replace the original sled on your DJI RS 3 or RS 3 Pro gimbal with this Power Pass-Through Plate from Tilta for additional power options on your rig. The plate is compatible with Manfrotto-style quick release plates to mount just about any camera.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
BNC-SMB Cable for the TRINITY Joystick Main Cable. Replacment for the BNC-SMB Cable included in the TRINITY Joystick Main Cable (K2.0014804)
Additional monitor bracket to mount a second small monitor onto the rods of all artemis artemis monitor brackets. Works with: K2.0010321, K2.0010322, K2.0010323, K2.0010324. Note: Transvideo monitor mount 6639 is not included!
Upper attach 200-750N (M6 threads)
Upper attach 900-1200N (M8 threads)
Wind Net 4'(120cm)x6'(180cm)
Flexible joystick cable to connect the Master Grip TRINITY to the TRINITY 2 when the rig is fully extended or when using a Super Post. Lemo 0B 4pin to Lemo 0B 4pin, 125cm/49in. TRINITY 2 only
Mid nylon block, complete unit, with pivot stop
Plastic cover
ARRI Standard to DJI Ronin 2 Dovetail Adapter (7")
29mm high adapter for use with Box Cameras like Sony P1, to get them into a more usable camera hight.
Usually ships within 4 to 8 weeks
Front Docking Fork Dia. 50mm Opening
12V power cable to connect a battery with D-Tab to the SRH-3 remote control panel. 12V, D-Tab, 4pin XLR, 1,5m/5ft, For SRH-3
Adapter to mount ARRI or cmotion focus receivers at the artemis Focus Bracket. For the artemis Focus Bracket K2.0010446
Focus bracket adapter to mount Preston MDR2 or MDR3 focus receivers onto the artemis focus bracket. For the artemis Focus Bracket K2.0010446
Flexible joystick cable to connect Master Grip TRINITY with TRINITY 2. Lemo 0B 4pin to Lemo 0B 4pin, 75cm/29.5in. TRINITY 2 only
12V high capacity camera power cable. Lemo 2B 7pin to XLR 4pin, 0.7m/2.3ft. For ARTEMIS 2 and TRINITY 2 only!
Secure your Tilta Float post, vest, and stabilizing arm to one Docking Station with this adjustable system, allowing you to more efficiently rest your gimbal without needing to take it apart. The center 5/8" baby pin is compatible with various stands and can be adjusted for optimal balance.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Comfortably support your RS 2, RSC 2, RS 3, or RS 3 Pro gimbal using both hands and the Dual-Handle Bracket for DJI Ronin from Tilta. Made of lightweight yet durable aluminum, each flexible handle features a rotatable folding design, a shoe mount, and anti-twist 1/4"-20 and 3/8"-16 accessory threads.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Lower attach 200-750N (M6 threads)
Lower attach 900-1200N (M8 threads)
This Steadicam Bag for AERO Solo or Zephyr Vest is designed and manufactured to carry your vest securely and safely, while the wide zippered opening makes it easy to remove and replace the vest.
12V power cable to power a Transvideo Starlight, or Small HD 503 monitor from the Master Grip TRINITY. Lemo 0B 4pin to Lemo 0B 2pin. MGT-1, MGT-2, TRINITY 2 only!
The Steadicam AERO Camera Plate is compatible with the sled of both the AERO 15 and AERO 30 stabilizer systems. It's a dovetail plate that mounts the camera on the top stage of the sled.
Wireless Control Receiver Module for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Remote Control Receiver Module for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Mid nylon block, complete unit, rotating
500N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
600N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
750N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
900N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M8 threads)
Umbrella with holder, fits our ALU profile, for Easyrig Minimax
Quick release camera hook, with 2 pcs 3/8" and 2 pcs 1/4" ball studs
300N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
Bellow block
Quick release camera hook, with 2 pcs 3/8" and 2 pcs 1/4" ball studs
Camera hook with ball stud mounted
400N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
Shock absorber 1000N (M8 threads)
200N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M6 threads)
Shock absorber 1200N (M8 threads)
Cheese plate to Sony Venice for Vario 5
1200N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M8 threads)
Cheese plate to Sony Venice for Cinema 3
Cheese plate to Sony Venice for Minimax
Umbrella with Holder
Shock absorber 900N (M8 threads)
Quick release camera hook, with 2 pcs 3/8" and 2 pcs 1/4" ball studs
Camera hook with ball stud mounted
The most common spare parts gathered in a plastic box
1000N Shock absorber for 800-1000mm/31.5-39.37in lower bars (M8 threads)
This extension will add a knurled handle to the top of the 1.8" Gimbal. This way the Gimbal will have knurled handles at both ends. diameter 1.8" - length 52mm (2"). Works with all artemis 1.8" artemis Gimbal
Receiver mount for ARRI, cmotion, Aladin, Fox and Preston focus receivers. For all artemis systems. Note: Additional adapters are needed for ARRI and Cmotion K2.0010447 and for Preston K2.0010448
Additional compact counterweight. Weight: 300gr, 0,66 lbs. TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Universal Monitor Mounting Set, TRINITY 2
Armorman 3.0 Velcro Wrist Attachment Plate (L/R)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Double rubber bellow for the 500mm/19.7in steel pipe
Arm Post with diameter 5/8'' (15.8 mm) and a length of 10'' (254 mm). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Tally Sensor Cable / Lemo 0B 4pin
12V power cable to power a ARRI Starlite monitor from the Master Grip TRINITY. Lemo 0B 4pin to Lemo 0B 5pin. MGT-1, MGT-2, TRINITY 2 only!
Hydra Alien 75mm Ball Head Riser (200mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien Small Suction Cup
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien Large Suction Cup
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 100mm Ball Head Riser (150mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 75mm Ball Head Riser (150mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 100mm Ball Head Riser (200mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 100mm Ball Head Riser (100mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hydra Alien 75mm Ball Head Riser (100mm Height)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Wind Net 3'(90cm)x4'(120cm)
Armorman 3.0 Overhead Configuration Cable Pulley
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Camera hook, Phillips, RED, gap 50mm / 1.96in
Camera hook, Phillips, RED, gap 50mm / 1.96in
Tally Gen.2 Pwr, TST-2, Fischer 3pin to Lemo 0S 3pin, 0,35m / 13.7in
Tally Gen.2 Pwr, TRH-2, Fischer 3pin to Lemo 0S 3pin, 0,75m / 29.5in
12V power cable to power a second ARRI Starlite monitor from the TALLY Gen.2 host. Lemo 0B 2pin to Lemo 0B 2pin. TALLY Gen.2
Additional compact counterweight. Weight: 150g / 0.33lb. TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
The 3/8" extension allows additional counterweights to be mounted on the TRINITY Pendulum Gen. 2. Attaching counterweights to the side of the top and bottom stages TST-1, TST-2, BST-1, BST-2. But also stacking two SAM Zero dovetail plates on top of each other to raise the COG of smaller cameras. TRINITY Pendulum Gen.2, TST-1, TST-2, BST-1, BST-2, SAM Zero...
Additional compact counterweight. Weight: 50gr, 0.110 lb. TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Spare cone for the Spider K2.0010425 used with the MAXIMA QL Fits spigots and arm posts with 15,9mm 5/8in diameter
1 pound weight, can be added to above or to bottom of Archer2, Zephyr stabilisation systems.
Smooth your gimbal vehicle shots by reducing shake and vibration with the Hydra Alien Shock-Absorbing Head with Soft Spring Module from Tilta when using it with a Hydra Alien or Predator shock-absorbing arm. This vibration-dampening unit supports gimbals such as the DJI RS 3 or RS 2 in an inverted orientation.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Shock absorber 400N (M6 threads)
Camera hook, standard for Easyrig 3
Lower straight support bar complete with line wheel and guide wheel, without spring
Front block with a red line wheel, mount for ST001
Lower straight support bar complete with line wheel and guide wheel, without spring
Ratchet belt buckle for EASYLOCK
Shock absorber 600N (M6 threads)
Shock absorber 500N (M6 threads)
Shock absorber 750N (M6 threads)
Shock absorber 300N (M6 threads)
Shock absorber 200N (M6 threads)
This awesome product allows you to leave the Steadi plate on your camera & mount to a head or a cart.
This awesome product allows you to leave the Steadi plate on your camera & mount to a head or a cart.
The Ronin Adapter reduces the width of the adicam Quick Release Plate to fit a Ronin base. The adapter works only with the DJI Camera Base Plate for Ronin 2.
The Ronin Adapter reduces the width of the adicam Quick Release Plate to fit a Ronin base. The adapter works only with the DJI Camera Base Plate for Ronin 2.
Archer/Shadow/Zephyr Adapter - RED
Archer/Shadow/Zephyr Adapter - BLACK
Camera hook, standard for all rigs, this with wider gap 44mm/1.73in
Extents the length of the artemis Gimbal handle by 35mm (1,37''). Only for artemis Gimbals with the bended round handle
Wider arm post fort artemis springs arms and arms using 0.625in / 15.9mm arm posts
Additional compact counterweight. Weight: 25gr, 0.055 lb. TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Power / Tally cable that connects the Tally host module to CCP Live.
Armorman 3.0 Support Vest Dock
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Adjustable nylon block for extended upper support bar, complete with knob and 2 washers
Adjustable nylon block for upper support bar, complete with knob and washers
Adjustable nylon block for extended upper support bar, complete with knob and washers
Tablet Aluminum Mount and Tripod Flexible Grip with Ball Head
Distribute weight evenly across your shoulders when using the Tilta Float Support Vest with the Float Shoulder Support from Tilta. The soft and breathable material makes the support comfortable, and the ergonomic design ensures even weight distribution across your shoulders.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Short 15mm to 19mm rod for the use of the K2.0014831 Monitor Mount for Transvideo and K2.0014832 Monitor Mount for SmallHD with the TRINITY Joystick, Monitor mount Diameter 15mm and 19mm, usable length 80mm / 3.15in
Tally Gen.2 Pwr, TST-1, Lemo 0S 3pin to 0S 3pin, 0,35m / 13.7in
Tally Gen.2 Mon Pwr, Lemo 0B 5pin to 0S 3pin, 0,25m / 9.8in
Battery Plate for Hydra Arm Mini - Gold Mount
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Battery Plate for Hydra Arm Mini -V Mount
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Hand Held Camera Adapter for Low Mode Bracket
Monitor Accessory Mounting Clamp for 25mm Gimbal Rod
Monitor Accessory Mounting Clamp for 30mm Gimbal Rod
Upper cross bar
Plastic cover, complete
Camera hook
Monitor Power, 12V, Lemo 0B 2pin to 5pin
Tally Gen.2 Mon Pwr, Lemo 0B 2pin to 0B 2pin, 0,10m / 3.9in
Spindle mount, attaches to a diameter 25mm/0.98" & diameter 30mm/1.18" gimbal frame
7" Magic Arm with 25mm Rod Clamp Accessory Mount
Top Camera Support Bracket for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Cylindrical adapter into which an articulated arm with a 1/4 inch thread can be screwed.
Spare rubber duck antenna. Note: Only for ERM-900 (K2.0033758)
Cylindrical adapter into which an articulated arm with a 1/4 inch thread can be screwed.
When using the Advanced Rear Operating Control Handle to your DJI RS 3 Pro or RS 2 gimbal stabilizer, add more room for the large gimbal to maneuver with this RS 3 Pro Expansion Bracket from Tilta.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Mount with ball stud and locking mechanism
Smartphone Aluminum Clamp 7'' Magic Arm
The left-side Hook-and-Loop Wrist Attachment Plate allows you to achieve one-to-one mobility with the left arm of the Tilta Armor Man 3.0 stabilizer. The plate attaches to the stabilizer arm, and then you can secure it around your left wrist with the integrated hook-and-loop fasteners. The stabilizer arm will then move along with the movements of your hand.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
The right-side Hook-and-Loop Wrist Attachment Plate allows you to achieve one-to-one mobility with the right arm of the Tilta Armor Man 3.0 stabilizer. The plate attaches to the stabilizer arm, and then you can secure it around your right wrist with the integrated hook-and-loop fasteners. The stabilizer arm will then move along with the movements of your...
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Top chassi plate 2mm/0.08in
Tube between bars, STEEL, Middle pipe to rise the upper bar for use with Serene arm, length 500mm/19.7 in
Side distance with holes, length 260mm/10.23in
Bottom chassi plate strong, 3mm/0.118in
Bottom chassi plate, 2mm/0.08in
Top chassi plate strong, 3mm/0.118in
Holder for umbrella, fits our ALU profile, for Easyrig Minimax
Hanger for the STABIL Light arm
Umbrella without holder for our larger systems, Easyrig 3 and Vario 5
Lower nylon block with pivot stop
Easyrig Holder for Umbrella, fits the larger ALU profile (Easyrig 3 & Vario 5).
Spare arm post clamp ring. Fits any diameter 5/8in 15.8mm arm post
Umbrella without holder for the Minimax system
Gravity G Series Gimbal Body Mounting Plate
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Male BNC to male BNC video cable.
Rubber bellow
Upper nylon block
Rubber bellow
Rubber bellow
Upper nylon block
Rubber bellow
Lower nylon block Old
Aluminum Tablet Tripod Mount with Cold Shoe
Alu pipe, 30X680 mm / 1.18X26.77 in
This Steadicam Bag for Aero A-15 or Steadimate A-30 Arm is designed and manufactured to carry your arm securely and safely, while the wide zippered opening makes it easy to remove and replace the arm. It features a single sewn strap for carrying.
Armorman 3.0 Universal Gimbal Ring Adapter Clamp (Pair)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Side pouch for Minimax vest
Nylon end plug with 1/4" threads and spacing for line for Ext.+130mm, +230mm upper arms and the STABIL arm
Support bar, length of Alu profile 455mm/17,91in, line exit adjustment 280mm/11in
Cover for the STABIL arm, same fabric as on the vest, fits STABIL and STABIL G2/G3
Support bar, length of Alu profile 390mm/15,35in
End plug of nylon with 1/4" threads and spacing for line to Ext.+130mm and +230mm upper arms
Armorman 3.0 Screw Kit
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Armorman 3.0 Overhead Configuration Gimbal Ring Adapter Clamp (Pair)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
This clamp features a shoe adapter for a SmallHD tilt arm shoe mount, and the crab-type clamp is secured with a thumbscrew.
Usually ships within 4 to 9 weeks
Arm Post with diameter 5/8'' (15.8 mm) and a length of 6'' (152.4 mm). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Arm Post with diameter 5/8'' (15.8 mm) and a length of 3'' (76 mm). Works all spring arms and gimbals which are compatible to diameter 5/8'' (15.8 mm) arm posts
Arm Post ( Dia. 15.7mm 420mm)
The Steadicam FFR-000014 is a sand bag for stabilization of static equipment. This sand bag can be used as ballast on a C-Stand or other stand used for Steadicam docking.
The Steadicam 801-7920-04 is a starting weight that fits on the end portion of the Merlin System. This weight is the initial weight with the Merlin stabilizer and works for small cameras.
The Steadicam 801-7920-05 is a weight option that fits on the middle portion of the Merlin System. This weight works for specific applications where a larger piece of equipment or monitor is added to the system.
End weight for Merlin
Spare rubber duck antenna. Note: Only for ERM-2400 (K2.0033763)
Tube between bars, STEEL, only for Varo 5 strong thickness 4mm / 0.157iN Length 300mm / 11.8in
End plug of nylon with 1/4" threads, for upper Std. arm
Adjustable nylon block for the upper support bar, complete with knob and 2 washers
Tube between bars, ALU, only for Vario 5 Std. thickness 4mm / 0.157iN Length 300mm / 11.8in
Spring adjustment knob
Cover plate for spring mechanism, Alu.
Black line wheel
Safety strap
Tube between bars for 900-1200N models (Steel, thickness 4,0 mm/0.157in) L: 300mm / 11.8in
Hanger for Easyrig systems equipped with the STABIL arm.
Tube between bars (New) for 200-1200N models (Al. thickness 4mm/0.157in) L:225mm/8.85in
Side plate for EASYLOCK
Nylon end plug with 1/4" threads, for upper Std. arm
Safety strap
Upper crossbar
Handheld Gimbal Tripod Clamp
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Accessory Mounting Clamp for 22mm Rod
Accessory Mounting Clamp for 25mm Rod
Coupler Pom Insert Adapter
Side help upper, with rubber cover
Ring around tube diameter 20mm/0.78in, with pivot stop
Ring around tube with pivot stop
Ring around Tube diameter 20mm/0.78in Old model
Ring around tube diameter 20mm/0.78in Old
Smartphone Tripod and Selfie Grip With Ball Head
Side help lower
Ropes with loop endings, comes in pair
Nucleus-Nano Hand Wheel Attachment Plate for RS 2/Ronin S
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Backup Post Tool for all artemis and TRINITY systems.
Spring adjustment knob
Bracket for allen key, attached to the swinging arm axle
Side distance with holes, length 95mm/3.74in
Lower chassi mount for plastic cover
Smartphone Aluminum Clamp Tripod Mount With Cold Shoe
5/8" Arm Post Adapter
3/4" Arm Post Adapter
Rope wheels with ball bearings - axle diameter 6MM/0.24in
Lower cross bar
Rope wheel with ball bearings - axle diameter 6MM/0.24in
Lower crossbar
Slip ring for bar diameter 26mm/1.02in
Wireless Video Mounting Bracket
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Side Arm Counterweight Clamp
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Side Mounted Cold Shoe Adapter
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Rosette Extender Arm
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Left Side NATO Rail to Rosette Adapter
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Right Side NATO Rail to Rosette Adapter
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Lightweight Springs for Hydra Alien
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Attach hoop for support bar
3/4" Balance Spud
Side bar
Male BNC to male BNC video cable.
220g Counterweight
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Chassi screw kit for Vario 5 strong, Includes all screws and locking nuts for 1 complete unit
Rope with manual and tools, for Easyrig 5 Vario
Adjustment allen key +/-
Rope replacement kit for the Easyrig 3 GimbalRig system (long absorbers) L: 490cm / 193in, with tools and manual
Red line wheel
Red line wheel
Linestopper for all Easyrig models
Rope with manual and tools (for all Easyrig 3 except Easyrig 3 Gimbalrig) Length: 360cm/142"
Hydra Alien Tool Kit
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Tool Kit for Hydra Predator Shock Absorbing Arm
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Axis Adjustment Locking Plates for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Strap for EASYLOCK
Protection Kit for RS 2
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Tilta Tactical Patches (Hydra Logo Type II)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Protect your DJI RS 3 and RS 3 Pro gimbal screen with this Tilta Protection Kit. Included in the kit is a tempered glass screen protector that is scratch and chip resistant. A cleaning paper, cleaning sticker, and a round sealing sticker are also included in the kit to ensure your screen is clean before installation.
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Rope wheel diameter 20mm/0.78in - axle diameter 4mm/0.15in
Rope wheel diameter 24,5mm/0.96in - axle diameter 4mm/0.15in
100g Counterweight
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Screw for cover, (comes in pairs)
Holder for side bar, delivered with washers and M6 screw
Bottom piece
Side distance round, height 40mm/1.57in
The Balance Weight for Solo from Steadicam is an additional 4.6 oz counterweight for the Solo system that can be screwed into the weights included with the stabilizer, providing counterbalance for heavier loads.
1/4" ball stud for Easyrig Quick release
3/8" ball stud for Easyrig Quick release
1/4"-20 Stainless steel camera mounting screw.
3/8"- 16 Stainless steel camera mounting screw.
Steadicam's 1/4-20" Spacer is a 1/4-20" spacer for the Steadicam Solo System.
60g Counterweight
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Belt
Replacement velcro for the GimbalRig vest, size male 8x12 cm / 3.1x4.7 in, female 10x34 cm / 3.9x13.4 in
Upper chassi mount, height 20mm/0.787in
Wheel in bar
Spacer/shock absorber, height 10mm/0.393in
Lower attach, Cover out of Nylon
Upper chassi mount, height 14mm/0.551in, Old
Conical screw to lock the arm in 90 degree, only for 2nd generation of STABIL
Screw to lock the arm in 90 degree, old
Protection Kit for RS 3(Pair)
Delivery time of 4 to 6 weeksUsually ships within 6 weeks
Lower buckles, 50mm/1.96iN comes in pairs (male part 3 pins)
Knob and 2 washers to V052
Rope
Rope for Easyrig 5 Vario. NOTE! no tools will be included, Length: 332cm/131in
Rubber holder for allen key, comes with 2 cable ties
Knob and washer for ST052
Nut for mounting power pack to vest, price is for 1 piece with 2 washers
Replacement rope without tools L: 490cm / 193in
Knob and washers for EA052
Rope for Easyrig 2.5 and 3 Cinema, NOTE! no tools will be included, Length: 360cm/142in
Buckles for hip belt, 50mm/1.96iN comes in pairs, (male part 3 pins)
Buckles for hip belt, 50mm/1.96iN comes in pairs, (male part 5 pins)
Ball and socket joint M6
Lower buckles, 50mm/1.96iN comes in pairs Old (male part 5 pins)
Lever for spindle mount
Buckles for vest, 25mm/0.98in comes in pairs
Buckles for vest, 40mm/1.57in comes in pairs
Knob for camera hook, rubber coated
Knob for camera hook
Upper buckles, 25mm/0.98iN comes in pairs
Spring for camera hook
Spring +/- adjustment wheel , label and screw included
Screw with spacers and locking nut, M6X50mm
Knob for camera hook
Spring for camera hook
Upper attach, Cover out of Al.
Rubber washer with "Warning text", for 600N and above.
Label on Minimax cover/lid "Easyrig minimax"
Screw with locking nut, M5X50mm
Screw to fasten chassi plates and side distances together, M5X10mm
Cover for camera hook, 40mm/1.57in internally
Eyelet for Vario 5 gas shock absorber, both models
Label "STABIL Light"
Cover for camera hook 30mm/1.18in internally
Voven label to the Minimax vest, placed on the chest "Easyrig Minimax"
End plug, upper/lower
Knob for plastic cover, for adjustment of support arm up and down.
Knob and 2 washers to MM001
Safety hook / Swivel
Cover for camera hook, 40mm/1.57in internally
Strap tightener, 40mm/1.57in
Strap tightener, 20mm/0.78in
Knob to attach the hoop to the vest
End plug
Label "Easyrig Minimax", for spring adjustment wheel